-
Application of 355nm ultraviolet laser light in glass products
Jun 21 , 2022
Application of 355nm ultraviolet laser light in glass products Glass is a widely used material in our daily necessities, and it is used in many places, from small household mirrors to large spacecraft. Glass is a silicate non-metallic material that crystallizes from raw materials such as soda ash, limestone, and quartz by dissolving. Although this artificially made glass is beautiful, it al...
view more
-
Application of UV laser beam source in marking machine
Jun 22 , 2022
Application of UV laser beam source in marking machine Glass is formed by the fusion of silica and other chemicals (mainly produced from: soda ash, limestone, quartz). A silicate-based non-metallic material that forms a continuous network structure during melting, and gradually increases in viscosity and hardens during cooling, causing it to crystallize. As a synthetic material, it exudes a...
view more
-
Glassware Laser Engraving 3w, 5w and 10w UV laser source
Jun 22 , 2022
Glassware Laser Engraving 3w, 5w and 10w UV laser source Glass has good internal structure stability, high mechanical and chemical properties, low expansion coefficient, can withstand high temperature differences, good flame processing performance and good transparency, and can be used in a variety of ways as required Products made into various shapes. As an ancient material, glass c...
view more
-
Characteristics of high frequency pulsing solid state laser and its application in FPC and PI film
Jun 22 , 2022
Characteristics of high frequency pulsing solid state laser and its application in FPC and PI film Characteristics of UV laser marking machine and its application in FPC and PI film FPC is an important connection line in the field of electronic applications and an indispensable part of electronic circuits. CVL cover film is a partner of FPC, and it can effectively exert anti-oxidatio...
view more
-
The difference between water cooling and air cooling of 5W UV laser source
Jun 22 , 2022
The difference between water cooling and air cooling of 5W UV laser source The laser marking machine uses a laser beam to permanently mark the surface of various substances. The effect of marking is to expose the deep material through the evaporation of the surface material, so as to engrave exquisite patterns, trademarks and characters. Laser marking machines are mainly divided into CO2 la...
view more
-
Is it better to use 3 Watt 355 laser uv or CO2 laser for glass marking?
Jun 22 , 2022
Is it better to use 3 Watt 355 laser uv or CO2 laser for glass marking? RFH Laser has 15 years of experience in R&D and production of laser equipment. It is used for glass marking and engraving machines. If the marking effect and marking accuracy are high, it is recommended to use UV laser marking machines. The effect produced by UV is smooth and non-grainy to the touch, and the glass s...
view more
-
How to solve the shallow depth of 355nm UV laser source laser engraving
Jun 22 , 2022
How to solve the shallow depth of 355nm UV laser source laser engraving When the UV laser marking machine is in use, the problem of weak laser light and shallow laser engraving depth often occurs. This problem is generally caused by improper operation. 1. Check whether the laser of the UV laser marking machine deviates from the center point after entering the galvanometer. The optica...
view more
-
How to identify the fault cause of high frequency pulsing solid state laser
Jun 22 , 2022
How to identify the fault cause of high frequency pulsing solid state laser When all the machines are faulty, today we will talk about the faults that may be encountered during the use of the UV laser marking machine. There are many reasons for the failure of the UV laser marking machine. It may be due to improper selection of the laser, or the main board, circuit board, power supply or con...
view more
-
Will 3w 5w uv laser diode replace CO2 laser marking?
Jun 22 , 2022
Will 3w 5w uv laser diode replace CO2 laser marking? In the rapidly developing laser industry, the status of CO2 laser technology has gradually declined in recent years. Born in 1964, it can be said to be an "old" laser technology. In the decades-long history of laser applications, CO2 lasers have been the main force for a long time, whether in manufacturing, medical, or scientific research...
view more
-
Does the high power uv laser source need to be used with a chiller?
Jun 23 , 2022
Does the high power uv laser source need to be used with a chiller? During the production process of the UV laser marking machine, the equipment generates a lot of heat, which causes the equipment to fail to operate normally. The function of the chiller is to provide a high and constant liquid temperature to ensure the safe operation of the mother machine. The working principle of the chill...
view more
-
Application of ultraviolet laser diode source
Jun 23 , 2022
Application of ultraviolet laser diode source Glass is formed by the fusion of silica and other chemicals (mainly produced from: soda ash, limestone, quartz). A silicate-based non-metallic material that forms a continuous network structure during melting, and gradually increases in viscosity and hardens during cooling, causing it to crystallize. As a synthetic material, it exudes a quiet an...
view more
-
Can both uv pulsed laser 20w and carbon dioxide laser marking machine mark glass?
Jun 23 , 2022
Can both uv pulsed laser 20w and carbon dioxide laser marking machine mark glass? The laser marking machine has the effect that the traditional method cannot achieve. In the glass products that are already fragile in electronic products, a product with high requirements, the marking of a product has a very important impact on the image of the product, and even has a major impact on the qual...
view more
