Glassware Laser Engraving 3w, 5w and 10w UV laser source

Glass has good internal structure stability, high mechanical and chemical properties, low expansion coefficient, can withstand high temperature differences, good flame processing performance and good transparency, and can be used in a variety of ways as required Products made into various shapes.

As an ancient material, glass can be used not only in the fields of architecture and art, but also in medical treatment and instrumentation. In the chemical laboratory, glass is an essential vessel, and most of the work needs to be done with glass vessels. Now, let's take a look at what glassware is there!

1. Beaker Beaker is a common laboratory glassware, usually made of glass, plastic or heat-resistant glass. The beaker is cylindrical in shape and has a notch on one side of the top for easy pouring of liquids. The outer wall of the beaker is also marked with scales that allow a rough estimate of the volume of liquid in the beaker.

2. Measuring cup The shape of the glass measuring cup is a circular cone with a large upper and a lower lower, which can hold more liquid than a measuring cylinder.

uv laser | green laser | Ultraviolet lasers | uv dpss laser | nanosecond laser | UV laser source | Solid State Lasers

3. Test tubes, commonly used instruments in chemical laboratories, are used as reaction vessels for small amounts of reagents, and are used at room temperature or when heated

Glass is a light-transmitting material. For a long time, it has been difficult to make clear and beautiful text and pattern marks on glass by traditional marking methods. The glass laser marking machine uses a laser beam to mark the text pattern information that cannot be erased on the glass surface, and the effect is clear and beautiful.

The UV laser marking machine of RFH laser adopts non-contact processing, which is not affected by mechanical movement, the surface will not be deformed, the marking scale on the glass is clear and permanent, and it will not fade and fall off.