Does the high power uv laser source need to be used with a chiller?

During the production process of the UV laser marking machine, the equipment generates a lot of heat, which causes the equipment to fail to operate normally. The function of the chiller is to provide a high and constant liquid temperature to ensure the safe operation of the mother machine. The working principle of the chiller is to first pump a certain amount of water into the internal water tank of the machine, the injected water is cooled by the cooling system, and then the cooling water is pumped into the equipment that needs to be cooled.

uv laser | green laser | Ultraviolet lasers | uv dpss laser | nanosecond laser | UV laser source | Solid State Lasers

The cooling water is cooled by the high-temperature equipment, and the temperature of the water will increase after cooling. However, the high-temperature water returns to the water tank to be cooled again, so that the circulating exchange cools down and acts as a cooling device.

The new generation of microcomputer controller can control the operation of the compressor cooling system according to the requirements of the set parameters. It can be adjusted to constant temperature mode and room temperature coherent mode, and the temperature control accuracy is ±0.5℃. At the same time, a water temperature similar to the ambient temperature is provided to cool the lens, which solves the problem of damage caused by condensation when the lens is cooled with low-temperature water, and is the best choice for cooling the whole laser machine.