RFH 20w nanosecond high power UV laser solves the difficulty of cutting glass
The characteristics of glass are well known to be hard and brittle, so cutting glass has always been a difficult task in industrial processing.
Although it is difficult to process, because glass is basically non-conductive, it is suitable for electrodes. Taking advantage of this feature, many electrode glass tubes came into being.
In traditional glass processing, the most common is "diamond tool", or a relatively new alloy material grinding wheel, no matter which one, the principle is the same, that is to use a higher hardness than glass tip to cut.
This "hard-to-hard" cutting method is most commonly used in glass processing. The diamond tip or alloy grinding wheel is used to scratch the surface of the glass. Because of the higher hardness, a crack will be generated, and the glass can be easily cut along the crack.
This traditional method of cutting glass has been around for a long time, but in many years of processing, we have also found many fatal disadvantages, which greatly affect the processing accuracy and scope of application.
Traditional cut glass has three major disadvantages:
1. The cutting precision is not high, and the edges are prone to burrs.
2. It is easy to produce micro-cracks and reduce the overall hardness.
3. The scope of application is narrow, and the processing of glass tubes is difficult.
In addition to the above three disadvantages, traditional processing also has problems such as unstable quality control and low processing efficiency. As a result, a new processing method is urgently needed, and the laser naturally comes to the front.
Since the laser is a "non-contact" processing method, there will be no micro-cracks during processing, and the edges are smooth and sharp, which can be applied to various shapes of glass.
Among all the lasers, the most suitable one is definitely the ultraviolet laser (cold light), but it needs a high-power ultraviolet laser of more than 10W. High-power laser has the characteristics of fast processing speed and high processing accuracy, which meets the requirements of large-scale precision processing.
The RFH 20W high-power UV laser can easily cut the "electrode glass tube", and the 8mm diameter glass tube is cut by rotating, with no burr on the edge and high processing accuracy.
RFH High Power UV Laser All-in-One Recommended
Expert III 355 High Power UV Pulsed Solid State Laser
RFH Expert III 355 series UV semiconductor-pumped pulsed solid-state lasers adopt a unique laser cavity design, featuring small size and high integration. Through the unique acousto-optic Q-switching technology, it is suitable for various laser application control requirements, high-precision cooling system, and internal cavity self-purification system, so that the laser has a long life and stable operation.
RFH Expert III 355 has superior beam quality (M2<1.2), which is strictly guaranteed in all frequency ranges; pulse width <25ns@50k, small heat-affected area during processing, so it can achieve smooth edges without burrs, precision machining Not a problem.
When it comes to precision machining, we have to introduce all-digital intelligent power control technology.
RFH Expert III 355 uses self-developed power control technology, all-digital intelligent control, supports communication with computer, and can control the laser externally through RS232, which is easy to operate and facilitates remote operation and maintenance management in the later stage.
When cutting glass electrode tubes, through precise control, "±0.02mm high precision" can be achieved. High stability and cost performance are also the core advantages of RFH UV laser.
RFH has more than 15 years of ingenuity forging, and the doctoral team can independently develop the laser-specific power control system, which is the solid backing for the stable operation of RFH's entire laser system and the quality assurance of RFH.
Expert III 355 series UV DPSS laser, developed and produced by RFH, covers 10w-15w in laser power with short pulse width (<20ns@40K) ,superior beam quality (M²<1.2) and perfect laser spot quality (beam circularity >90%). It is widely used in PE/PCB/FPC cutting, glass & sapphire cutting, drilling, scribing & cutting used in high precision micromaching areas.
Expert III 355 series uv laser characteristics:
1. 355 nm output wavelength, 10 to 200 Hz repetition rate; laser power ranging from 10w-15w; Continuous tuning of repetition rate while maintaining constant pulse energy, superior beam pointing and energy stability make the Expert III 355 the first choice for micromachining, marking and thin film removal applications
2. Exceptional beam quality (M²<1.2) ,absolutely assured in all repetition rates; relatively short pulse width <20ns@40K with little heat transfer to surrounding material; perfect beam spot quality(Beam Circularity>90%)
Close to Gaussian smooth beam profile with low value M² < 1.2 and good focusability are beneficial for applications such as
3. Unique Q-switching technology, adapts a variety of control requirements of laser applications;Online refreshment for harmonic coupling technology;Excellent long term power stability Rugged sealed cavity, Extremely compact size, Simple and robust
4. Digital control technology for the driver, RS232 control interface ensures easy control and integration with laser marking equipment
5. This laser adopts one - style design with compact and reasonable structure, easy installation.
Easy to transport and saves space due to compact and light design
Water cooling,cost-effective and reliable end-pumping technology and amplifier-free DPSS design guarantee easy operation and alignment simple installation and low maintenance costs
6. Industrial production process control technology,provides quality stable products.
RFH - The leading industrial solid-state laser manufacturer
For over 13 years with excellent long term stability and exceptional good beam quality
Production in dust-free plant & rigorous quality control system
From purchasing, pre-production quality check, assembling, finished product testing, warehouse-in inspection, pre-delivery testing to after-sales service, each step is under control to make sure product quality and consistency in both machine parameters and actual running parameters. This is what makes RFH laser lasts longer than its peers.
Top professional team, independent R&D in laser oriented power supply control system
There is a one-to-one correspondence between power supply and laser. The stability of power supply control system determines if the laser can maximize its performance during operation. RFH Laser has independent R&D in power supply technique which enables timely update and improvement of power supply control system module based on the laser’s need. 12-year experience in R&D and a top professional team make RFH laser a reliable and stable laser system.
Core components of oversea brands with guaranteed quality
Pumping, Q-switching and other core components adopt oversea brands. Work with top brand component suppliers of home and abroad. Each component is guaranteed with its quality from the beginning of materials purchasing. This is why users can trust RFH laser.
UV laser+power supply+cooling system sold in a group
Being client-oriented, RFH offers proposal of selling the whole laser system in a group so that the laser system can maximize its performance while maintaining its stability.
Full-digital display, supporting communication with computer, capable of laser’s remote control
Each laser developed and produced by RFH can always remain high quality in industrial and extreme conditions of scientific research. With stable beam quality, high efficiency, best cost performance and high reliability, RFH has earned good reputation in different industries at home and abroad. After 12-year development, RFH has become a reputed brand in nanosecond laser industry.