RFH 20w nanosecond high power UV laser solves the difficulty of cutting glass   The characteristics of glass are well known to be hard and brittle, so cutting glass has always been a difficult task in industrial processing.   Although it is difficult to process, because glass is basically non-conductive, it is suitable for electrodes. Taking advantage of this feature, many electrode glass tubes came into being.

Singapore customer satisfied with RFH nanosecond green laser cutting 5mm thin glass     Glass has a very important application in our daily life, especially the use of thin glass occupies an important position in various fields. For the cutting of thin glass, how to make it accurately produced without breaking due to excessive stress during the production process has become a big problem.

RFH uses ultraviolet laser known as "cold light", which has a small heat impact, so cutting edges is smooth and without burrs, and the accuracy is extremely high.

The 35W high-power green laser cuts resin lenses effortlessly, and it is very safe and will not damage the lenses, which greatly reduces the loss rate and saves costs for the company. Yuen said that the cooperation with RFH was a long time ago. If RFH's products could be selected a few years earlier, then their own products would definitely be more competitive.

The RFH green laser has unique insights in cutting tempered glass film. The non-contact cutting method only needs to move the emitted light spot on the surface of the tempered glass film to allow the low-temperature cold light source to cut. It only takes a few seconds to cut a tempered glass film, which greatly speeds up the entire production line. .

35w green laser cutting or drilling on glass Expert III 532 series green DPSS laser, developed and produced by RFH, covers 35w in laser power with short pulse width (<25ns@50K) ,superior beam quality (M²<1.2) and perfect laser spot quality (beam circularity >90%).It is perfect for glass marking,thin film etching and surface treatment for most of the metals and non-metal materials, such as removing the oxide layer from the metal surface

In addition, the full screen of mobile phones not only has flat glass, but also curved glass, and different models of mobile phones have different curvatures, which also puts extremely high requirements on glass cutting manufacturers. What is the technology suitable for the current mobile phone glass cutting?

RFH 35watt high power green laser cutting glass with smooth edges   Expert III 532 series green DPSS laser, developed and produced by RFH, covers 35w in laser power with short pulse width (<25ns@50K) ,superior beam quality (M²<1.2) and perfect laser spot quality (beam circularity >90%).It is perfect for glass marking,thin film etching and surface treatment for most of the metals and non-metal materials, such as removing the oxide layer from the metal surface

The cutting of RFH green laser adopts non-contact cutting, and the cutting is completed by moving the high-energy light spot on the glass surface. It is worth mentioning that although the energy of the RFH green laser beam is extremely high, since the thermal effect is zero, it will not cause damage to other parts, allowing the glass cutting process to reach a balance.

High power ultraviolet laser engraving and cutting glass

High power ultraviolet laser engraving and cutting glass

Glass cutting has always been a delicate and intricate process, requiring precision and finesse. Traditional methods often involve manual scoring and breaking, which can be time-consuming and may result in imperfect cuts. However, with advancements in laser technology, cutting glass has become more efficient and precise. In this article, we will delve into the world of cutting glass using a 35W high power green laser, exploring its benefits, applications, and considerations.