-
RFH 20 watts high power uv laser engraver cutting ceramics
Oct 19 , 2023
RFH 20 watts high power uv laser engraver cutting ceramics
view more
-
How to cutting foil with 355nm uv laser engraver
Oct 19 , 2023
How to cutting foil with 355nm uv laser engraver A 355nm UV laser engraver uses a UV (ultraviolet) laser source that emits at a wavelength of 355 nanometers. UV lasers, especially those operating at 355nm, are part of the "third harmonic generation" lasers and are often derived from tripling the frequency of a 1064nm Nd:YAG or Nd:YVO4 laser. 1. Here are some key points and characteristics o...
view more
-
what setting for ceramic laser marking
Oct 19 , 2023
What setting for ceramic laser marking Ceramic laser marking is a process used to create permanent marks on ceramic surfaces using a laser. Ceramics are challenging materials because of their hardness and brittleness, but lasers can mark them effectively without physical contact, which minimizes the risk of damaging the ceramic. Here's a deeper dive into the application: 1. Principles of Ce...
view more
-
Causes and solutions of UV laser marking machine display and fan failures
Oct 18 , 2023
Causes and solutions of UV laser marking machine display and fan failures UV laser marking machine belongs to a series of laser marking machines, but is developed using 355nm UV laser. This machine adopts frequency doubling technology in the third cavity. Compared to infrared lasers, 355 UV has a very small focus. Spot and Can are mainly used for ultra-fine marking and engraving, which grea...
view more
-
UV or green laser marking machines problems and failures
Oct 18 , 2023
UV or green laser marking machines problems and failures Many companies and manufacturers have purchased laser marking machines and experienced abnormal problems such as reduced output power, inability of the laser beam to mark, failure to reach the expected marking depth, printing distortion, etc., and then they looked for repairs everywhere, that is, A waste of money and a waste of resources. RF...
view more
-
How to saving setting parameter for RFH nanosecond uv laser
Oct 18 , 2023
How to saving setting parameter for RFH nanosecond uv laser 1、Press “HOME” key to return to the main menu 2、Press“MENU” key, “ESC” key and “ENT” key to save the set parameters. The video of setting parameter
view more
-
How to Engrave on Leather with RFH 3W uv laser system
Oct 18 , 2023
How to Engrave on Leather with RFH 3W uv laser system
view more
-
What is the difference leather Laser Engraving with UV Laser,Fiber Laser or a CO2 Laser engraver
Oct 18 , 2023
What is the difference leather Laser Engraving with UV Laser,Fiber Laser or a CO2 Laser engraver There are so many different types of materials that you can use with your laser cutter and engraver. Most people know about the basics, such as wood and acrylic, but when it comes to going beyond those options and engraving other materials like leather, it can be daunting to figure out where to be...
view more
-
Laser cutting machine uses green laser/infrared laser/ultraviolet laser application differences
Oct 17 , 2023
Laser cutting machine uses green laser/infrared laser/ultraviolet laser application differences Laser cutting machine is an important tool in the cutting field and is known as the fastest "knife". Its principle is to irradiate the surface of the material with a high-density and high-energy laser beam to melt, vaporize, ablate or reach the ignition point. At the same time, the molten materia...
view more
