-
355nm laser source marking on bottle caps factory
Jun 20 , 2022
355nm laser source marking on bottle caps factory Customer review When working with any laser engraver and cutter, I will say that have a way to add high-pressure air. The build quality is just jaw-dropping. Everything from the plate to the cables is professionally designed and made. No errors with the irritation so far, and I'm having an excellent time engraving and learning with th...
view more
-
Maintenance of 3w and 5w UV Laser Marking Machines
Jun 21 , 2022
Maintenance of 3w and 5w UV Laser Marking Machines For UV laser marking machines, 3w and 5w are common equipment types. 3w and 5w UV laser marking machines are constantly developing, but long-term use will also cause some damage, which is also a common problem with every machine. However, if we do good maintenance, it will not be so easy to damage the machine. Therefore, in the process of m...
view more
-
The solution to the shallow marking depth of High power 10 Watt 355 laser
Jun 21 , 2022
The solution to the shallow marking depth of High power 10 Watt 355 laser In the process of using the UV laser marking machine, we will encounter some small problems, which cause the UV laser marking machine to not work normally and stably. At this time, we must use professional knowledge to find out the problem and analyze the problem, and then solve it. question. Today, let's take a look ...
view more
-
What factors affect the engraving on glass with the Ultraviolett (UV) Laser 355 nm
Jun 21 , 2022
What factors affect the engraving on glass with the Ultraviolett (UV) Laser 355 nm UV laser marking on flat glass is directly related to the peak power of the laser, the size of the focused spot, and the speed of the galvanometer. We have found that sometimes the light from high power lasers does not etch the glass surface, but passes directly through. This is because the peak power ...
view more
-
Application of UV laser beam source in marking machine
Jun 22 , 2022
Application of UV laser beam source in marking machine Glass is formed by the fusion of silica and other chemicals (mainly produced from: soda ash, limestone, quartz). A silicate-based non-metallic material that forms a continuous network structure during melting, and gradually increases in viscosity and hardens during cooling, causing it to crystallize. As a synthetic material, it exudes a...
view more
-
Glassware Laser Engraving 3w, 5w and 10w UV laser source
Jun 22 , 2022
Glassware Laser Engraving 3w, 5w and 10w UV laser source Glass has good internal structure stability, high mechanical and chemical properties, low expansion coefficient, can withstand high temperature differences, good flame processing performance and good transparency, and can be used in a variety of ways as required Products made into various shapes. As an ancient material, glass c...
view more
-
Is it better to use 3 Watt 355 laser uv or CO2 laser for glass marking?
Jun 22 , 2022
Is it better to use 3 Watt 355 laser uv or CO2 laser for glass marking? RFH Laser has 15 years of experience in R&D and production of laser equipment. It is used for glass marking and engraving machines. If the marking effect and marking accuracy are high, it is recommended to use UV laser marking machines. The effect produced by UV is smooth and non-grainy to the touch, and the glass s...
view more
-
Application research of 5 Watt 355 laser source marking on QR code below 1x1mm
Jun 22 , 2022
Application research of 5 Watt 355 laser source marking on QR code below 1x1mm As a modern precision machining method, laser marking technology has unparalleled advantages compared with traditional machining methods such as corrosion erosion, electrical discharge machining, mechanical scribing, and printing. The demand for precision marking in industrial manufacturing has seen positi...
view more
-
How to solve the shallow depth of 355nm UV laser source laser engraving
Jun 22 , 2022
How to solve the shallow depth of 355nm UV laser source laser engraving When the UV laser marking machine is in use, the problem of weak laser light and shallow laser engraving depth often occurs. This problem is generally caused by improper operation. 1. Check whether the laser of the UV laser marking machine deviates from the center point after entering the galvanometer. The optica...
view more
-
Will 3w 5w uv laser diode replace CO2 laser marking?
Jun 22 , 2022
Will 3w 5w uv laser diode replace CO2 laser marking? In the rapidly developing laser industry, the status of CO2 laser technology has gradually declined in recent years. Born in 1964, it can be said to be an "old" laser technology. In the decades-long history of laser applications, CO2 lasers have been the main force for a long time, whether in manufacturing, medical, or scientific research...
view more
-
Can both uv pulsed laser 20w and carbon dioxide laser marking machine mark glass?
Jun 23 , 2022
Can both uv pulsed laser 20w and carbon dioxide laser marking machine mark glass? The laser marking machine has the effect that the traditional method cannot achieve. In the glass products that are already fragile in electronic products, a product with high requirements, the marking of a product has a very important impact on the image of the product, and even has a major impact on the qual...
view more
-
What should I do if the 355nm laser uv laser is weak and the marking is uneven?
Jun 23 , 2022
What should I do if the 355nm laser uv laser is weak and the marking is uneven? After the UV laser marking machine has been used for some years, there have been various small faults, such as: the laser does not emit light or the light output is weak, marking. uneven graphics, power drop, polarized light, etc. So why does such a problem occur? When these problems occur, how should we investi...
view more
