10W-15W uv laser

10W UV nanosecond laser non-contact cutting copper foil

Copper foil is a negative electrolytic material, a thin, continuous layer of metal foil deposited on the base layer of the circuit board, which acts as the conductor of the PCB. It easily adheres to the insulating layer, accepts the printed protective layer, and forms a circuit pattern after etching. Due to the small thickness of the copper foil, it is easy to lose balance or affect the accuracy due to relatively high impact or material, but the RFH 10w UV laser can solve this problem.

  • Laser Wavelength:

    354.7nm
  • Average Output Power :

    3W-10W @30kHz
  • Pulse Width:

    <12ns @ 30kHz
  • Pulse Repetition Rate :

    10-200kHz
  • Beam Quality (㎡) :

    <1.2
  • Beam Diameter :

    0.8±0.2mm Measured at window
  • Beam Full Divergence Angle :

    <2mrad
  • Beam Circularity :

    >90%
  • Pulse-to-Pulse Stability :

    <2% RMS/@30kHz
  • Average Power Stability :

    <5% RMS/8hr
  • Beam-Pointing Drift :

    <30μrad/℃
  • Polarization Ratio :

    >100:1
  • Polarization Orientation :

    Horizontal
  • Operating Temp. & RH :

    10℃ to 30℃ | <80%
  • Storage Temp. & RH) :

    -20℃ to 65℃ | <90 %
  • Electricity Requirement :

    100-240VAC |50/60Hz | Single phase
  • Power Consumption :

    <500W
  • Warranty :

    18months
  • Product Detail
  • Video

uv laser

10W UV nanosecond laser cutting copper foil without contact, no carbonization and no deformation

cutting cpper foil

Copper foil is a negative electrolytic material, a thin, continuous layer of metal foil deposited on the base layer of the circuit board, which acts as the conductor of the PCB. It easily adheres to the insulating layer, accepts the printed protective layer, and forms a circuit pattern after etching. Due to the small thickness of the copper foil, it is easy to lose balance or affect the accuracy due to relatively high impact or material, but the RFH 10w UV laser can solve this problem.

 

RFH UV lasers have many advantages over traditional cutting methods. First, UV lasers use a small spot for cutting, which can project light at the position that needs to be cut, and complete the cutting through the impact of energy.

 

Maybe you will ask, will the energy beam damage the copper foil? In fact, the UV laser can adjust the size of the laser beam. And because the thermal effect of the ultraviolet laser is almost zero, it will not cause deformation damage to the copper foil, which greatly reduces the consumables in traditional cutting and reduces the cost.

 

In addition, the cutting speed of the RFH UV laser is fast, it can move and position automatically, and it can complete the cutting without special care during the cutting process, with low labor requirements. Moreover, the cutting of RFH ultraviolet laser does not need to replace any materials, it can be completed only by plugging in and connecting, and the whole process is in dust-free production, without any impact on the environment and human body.

The cutting of copper foil by RFH ultraviolet laser is a great progress in copper foil production, and it is also an important part of the progress and upgrade of circuit boards. It is an honor and strength that RFH ultraviolet laser can participate in this leap.

 

 

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related products
K-6 Integrated UV Laser 4W-6W
K-6 Integrated UV Laser 4W-6W-8W
K-6 series UV DPSS laser, developed and produced by RFH, covers 4W/6W/8W in laser power with short pulse width (<20ns@30K) ,superior beam quality (M²<1.2) and perfect laser spot quality (beam circularity >90%). K-6 series laser is ideal for high-end ultra-precise processing as well as marking in mobile phone shell , package of cosmetics, food, medicine and other high polymer materials, PCB, LCD, glassware surface, metal’s cladding material, plastic keypad, electronic component, gift, communication device, construction material and other areas.
Download datasheet
K-6 Integrated UV Laser 4W-6W
Why RFH UV laser is often used in laser marking plastic button switch?
Why RFH UV laser is often used in laser marking plastic button switch
Why RFH UV laser is often used in laser marking plastic button switch? More and more manufacturers choose UV laser marking machine to create pattern and characters on the plastic button switch. The focal spot of UV laser is pretty small with little heat transfer to surrounding material, so UV laser is also called “cold light source”. Because of this feature, heat effect won’t occur. Thus, distorting or burning of materials is no longer an issue.    Professional UV laser manufacturer - Shenzhen RFH Laser Technology Co.,Ltd    With 13 years of experience, the S9 series nanosecond UV laser developed and produced by RFH can engrave clear characters on the keyboard and the mouse. These kinds of characters can not only help people identify different buttons in the dark but also last long, for there are slightly protruding part on the buttons. This improves the durability and practicability of the keyboard and the mouse.   
Why RFH UV laser is often used in laser marking plastic button switch?
UV laser
UV laser featuring cold processing for marking plastic button on keyboard
 UV laser featuring cold processing for marking plastic button on keyboard More and more manufacturers choose UV laser marking machine to create pattern and characters on the plastic button switch. The focal spot of UV laser is pretty small with little heat transfer to surrounding material, so UV laser is also called “cold light source”. Because of this feature, heat effect won’t occur. Thus, distorting or burning of materials is no longer an issue.    Professional UV laser manufacturer - Shenzhen RFH Laser Technology Co.,Ltd    With 13 years of experience, the S9 series nanosecond UV laser developed and produced by RFH can engrave clear characters on the keyboard and the mouse. These kinds of characters can not only help people identify different buttons in the dark but also last long, for there are slightly protruding part on the buttons. This improves the durability and practicability of the keyboard and the mouse.   
UV laser
355nm UV laser
How can 355nm UV lasers be used in industrial production?
How can 355nm UV lasers be used in industrial production?   In modern industrial production, laser is an indispensable part. As the requirements for processing accuracy become more and more detailed, lasers are deeply involved in industrial links such as marking and cutting.
355nm UV laser
Laser engraving glass
Laser engraving glass, green laser or UV laser, which is better
Laser engraving glass, green laser or UV laser, which is better   At present, green lasers are widely used in the production of marking and engraving beer glasses, so many manufacturers have accelerated the promotion of production lines, and in fact, RFH UV lasers can also mark on glass.
Laser engraving glass
cuts diamonds
RFH 3W 5W 10W UV laser cuts diamonds, smooth without bursting
RFH 3W 5W 10W UV laser  cuts diamonds, smooth without bursting   Diamonds are one of the most high-end luxury goods. They are not only bright and look very bright, but also are one of the hardest substances in the world and have a very high collection value.
cuts diamonds
Marking Plastics
RFH 355nm UV Laser Cold Light Source Marking Plastics, No Carbonization, No Burning
RFH 355nm UV Laser Cold Light Source Marking Plastics, No Carbonization, No Burning   In the surface marking of plastics, there are always problems such as material being scorched, but the research and development of RFH 355nm UV laser has completely solved this problem, allowing more small and medium-sized growth enterprises whose main business is plastic marking to survive and room for development.
Marking Plastics
marking plastic auto parts
UV nanosecond laser marking plastic auto parts, accompany you to travel safely
UV nanosecond laser marking plastic auto parts, accompany you to travel safely   The development of automobiles has greatly facilitated human life, and the research and development of new energy vehicles has combined greenness and convenience. Plastic auto parts occupy an important position in the development and installation of automobiles, but the complex shape and a large number of demands make the marking of characters more complicated, and the RFH UV nanosecond laser can solve this problem very well.
marking plastic auto parts
Get the latest offers Subscribe for our newsletter

Please read on, stay posted, subscribe, and we welcome you to tell us what you think.

Leave A Message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

About

contact