10W-15W uv laser

Wow! RFH high -power UV laser cutting stainless steel can also be so fast

Wow! RFH high -power UV laser cutting stainless steel can also be so fast

 

20W high -power ultraviolet laser cutting stainless steel thin round sheet is too surprising

 

Challenge yourself and climb the peak! 20W UV laser cutting stainless steel is here

 

Q: Which metal material is the most common in modern society?

 

Answer: Stainless steel.

When it comes to stainless steel, 301, 302, 304 and other figures are often heard. These are different standard stainless steel. If you look closely, you will find that it is as small as a spoon to train, airplanes, and generators.

Since stainless steel is so common, the processing method is naturally different, especially in the face of precision parts, it also has a precise processing method of laser.

  • Laser Wavelength:

    354.7nm
  • Average Output Power :

    10W/12W/15W @40kHz
  • Pulse Width:

    <20ns @40kHz
  • Pulse Repetition Rate :

    10-200kHz
  • Spatial Mode:

    TEM00
  • Beam Quality (㎡) :

    <1.2
  • Beam Diameter:

    0.8±0.1mm Measured at window
  • Beam Full Divergence Angle :

    <2mrad
  • Beam Circularity:

    >90%
  • Pulse-To-Pulse Stability:

    <3% RMS/@30kHz
  • Average Power Stability :

    <5% RMS/8hr
  • Beam-Pointing Drift:

    <25μrad/℃
  • Polarization Ratio:

    >100:1
  • Polarization Orientation:

    Horizontal
  • Operating Temp. & RH:

    10℃ to 35℃ | <80%
  • Storage Temp. & RH:

    10℃ to 35℃ | <90 %
  • Electricity Requirement :

    100-240VAC |50/60Hz | Single phase
  • Power Consumption:

    <800W
  • Warranty :

    18months
  • Product Detail
  • Video

uv laser

 

Website: http://www.rfhtech.com

Whatsapp(Wechat): 18928466502

Email: export06@rfhlasertech.com

 

Wow! RFH high -power UV laser cutting stainless steel can also be so fast

 

20W high -power ultraviolet laser cutting stainless steel thin round sheet is too surprising

 

Challenge yourself and climb the peak! 20W UV laser cutting stainless steel is here

 

Q: Which metal material is the most common in modern society?

 

Answer: Stainless steel.

When it comes to stainless steel, 301, 302, 304 and other figures are often heard. These are different standard stainless steel. If you look closely, you will find that it is as small as a spoon to train, airplanes, and generators.

Since stainless steel is so common, the processing method is naturally different, especially in the face of precision parts, it also has a precise processing method of laser.

 

In traditional processing methods, the most common is nothing more than cutting machine cutting, sand wheel cutting, rolling knife cutting, etc., and cutting and polishing stainless steel through physical means.

Traditional processing methods are not bad, but they are more suitable for product processing such as large steel pipes or large wheel disks. These parts do not require too high precision. In the face of precision parts, it is obviously unable to meet the corresponding industrial standards.

In high precision processing, what we need is the finished product without burrs, no deformation, and cutting at the cutting site. Only when such standards meet the demand

 

With the development of high -power ultraviolet laser, RFH can be easily achieved through 20W ultraviolet laser.

Under the accurate processing of RFH laser, not only is the efficiency extremely high, but also has high accuracy, the incision is neat without burrs, and the parts can be used without later processing.

 

In the face of large -scale production, the use of RFH high -power ultraviolet laser can also be competent.

In addition, due to the excellent volume control of RFH laser, there is no need to do large light roads, and it is convenient to integrate with various equipment. It can be said that it is a Swiss military knife in the ultraviolet laser industry.

 

RFH Expert III 355 high -power UV pulse solid laser

Among the many products of RFH laser, Expert III 355 belongs to the head of the power UV laser, using more than 10W power, laser wave length of 354.7nm, repeated frequency coverage (10kHz to 200kHz), the applicable surface is wide.

 

At the same time, behind strong technical parameters, RFH Expert III has three major advantages:

 

1. Precision: high precision, excellent quality beam quality

 

As a high -quality ultraviolet solid laser, RFH Expert III 355 has high precision ± 0.02mm, and can achieve extreme accuracy through superior beam quality (M² <1.2) and perfect light spots characteristics (90%).

 

2. Stability: self -developed power supply technology

 

RFH laser has more than 15 years of technology accumulation, and the R & D team is luxurious. Through strong technical research and development of independent power supply technology, the power control system function module can be updated in time, and the functional module is improved according to the needs of laser.

 

In terms of technology, the unique Q qi control technology is used, which is sufficient to cope with various laser application control needs. Under the blessing of the internal cavity self -purification system, the laser has a long life and stable operation.

 

3. Convenience: full digital power control, support to communicate with computer

 

In the era of digitalization and the Internet, RFH Expert III uses full digital intelligent power control technology. Through the computer (RS232 serial port), it can remotely control the laser, which is convenient for later maintenance and simple operation.

As a modern ultraviolet laser, RFH Expert III has many advanced characteristics and is not afraid of various challenges.

 

In the face of stainless steel cutting, looking at the field of ultraviolet laser, RFH has the courage to open up innovative applications, no longer to endure various uncomfortable traditional processing, and feel the convenience of laser.

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related products
K-6 Integrated UV Laser 4W-6W
K-6 Integrated UV Laser 4W-6W-8W
K-6 series UV DPSS laser, developed and produced by RFH, covers 4W/6W/8W in laser power with short pulse width (<20ns@30K) ,superior beam quality (M²<1.2) and perfect laser spot quality (beam circularity >90%). K-6 series laser is ideal for high-end ultra-precise processing as well as marking in mobile phone shell , package of cosmetics, food, medicine and other high polymer materials, PCB, LCD, glassware surface, metal’s cladding material, plastic keypad, electronic component, gift, communication device, construction material and other areas.
Download datasheet
K-6 Integrated UV Laser 4W-6W
Why RFH UV laser is often used in laser marking plastic button switch?
Why RFH UV laser is often used in laser marking plastic button switch
Why RFH UV laser is often used in laser marking plastic button switch? More and more manufacturers choose UV laser marking machine to create pattern and characters on the plastic button switch. The focal spot of UV laser is pretty small with little heat transfer to surrounding material, so UV laser is also called “cold light source”. Because of this feature, heat effect won’t occur. Thus, distorting or burning of materials is no longer an issue.    Professional UV laser manufacturer - Shenzhen RFH Laser Technology Co.,Ltd    With 13 years of experience, the S9 series nanosecond UV laser developed and produced by RFH can engrave clear characters on the keyboard and the mouse. These kinds of characters can not only help people identify different buttons in the dark but also last long, for there are slightly protruding part on the buttons. This improves the durability and practicability of the keyboard and the mouse.   
Why RFH UV laser is often used in laser marking plastic button switch?
UV laser
UV laser featuring cold processing for marking plastic button on keyboard
 UV laser featuring cold processing for marking plastic button on keyboard More and more manufacturers choose UV laser marking machine to create pattern and characters on the plastic button switch. The focal spot of UV laser is pretty small with little heat transfer to surrounding material, so UV laser is also called “cold light source”. Because of this feature, heat effect won’t occur. Thus, distorting or burning of materials is no longer an issue.    Professional UV laser manufacturer - Shenzhen RFH Laser Technology Co.,Ltd    With 13 years of experience, the S9 series nanosecond UV laser developed and produced by RFH can engrave clear characters on the keyboard and the mouse. These kinds of characters can not only help people identify different buttons in the dark but also last long, for there are slightly protruding part on the buttons. This improves the durability and practicability of the keyboard and the mouse.   
UV laser
RFH
S9-Y-355-10-40-T
This series of lasers is specially designed for laser marking machines, precision cutting machines, precision drilling machines, laser stripping machine, glass inner winning machine and pan painting equipment. It can meet the laser needs of various applications. The laser wavelength is 354.7 nm, the repetition frequency range is wide, can cover 10kHz to 200kHz. The power range is from 3.0 W to 10.0 W. Importantly, our laser strictly guarantees superior beam quality in all frequency ranges, with m' less than 1.2. This means that our lasers provide excellent beam quality regardless of the frequency used. In addition, our laser has a very small pulse width, less than 12 ns at 30 khz. This means that the heat affected area during processing is small, ensuring accuracy and quality of the results. We adopt a unique q-switched control technology to meet the control requirements of various laser applications. At the same time, our intelligent power control technology makes the operation and monitoring of the laser easy and convenient. You can also communicate with your computer via RS232 to externally control our lasers. Integrated design for easy integration with equipment. Whether you need laser marking, precision cutting, close drilling, laser stripping, glass inner victory or pan judgment paint, our S9-Y-355-10-40-T series lasers can provide you with high-quality laser performance and stable and reliable work.
RFH
RFH
Exper III-Y-532-40-50
Shenzhen RFH Laser Technology Co., Ltd. has launched the new Exper III-Y series green laser in 2024. This series features a water-cooled design and is a medium-power nanosecond pulsed 532nm green solid-state laser. It is specifically designed to meet the needs of high-speed precision laser processing production lines, ensuring efficiency and long-term stability and reliability. With its excellent performance and stability, the Exper III-Y series laser will play a crucial role in the field of precision processing, bringing new technological breakthroughs and application prospects to the industry.  
RFH
RFH
ExpertIII 355-15-50
Specializing in the field of high-precision processing, EXPERTIII 355-15-50 series lasers to provide you with a comprehensive and high-quality solution. Whether it is PE/PCB/FPC cutting, or glass, sapphire cutting, or high-definition micro-processing of drilling, marking, cutting, etc. , our laser can meet your needs. Our laser uses an efficient wavelength of 354.7 nm, covering a wide range of repetitive frequencies (10 khz to 200 khz) . Regardless of your application scenario, we provide excellent beam quality (m & LT; 1.2) . Moreover, we guarantee the consistency of beam quality in all frequency range. To minimize the heat-affected region, our laser uses a pulse width of less than 20ns@40k. This means that even at high frequencies, the processing is still excellent. In addition, we also use a unique q-switched control technology to meet the needs of various laser applications, in order to ensure the long life and stable operation of the laser, we also use the internal cavity self-purification system. This makes our laser not only long life, but also stable and reliable operation, in order to facilitate the operation and monitoring, we use the digital intelligent power control technology. This makes your operation easier and allows you to monitor the status of the laser in real time; in addition, our laser also supports communication with the computer and can be controlled externally through the R5232. This gives you more convenience and flexibility in your work. Our EXPERTIII 355-15-50 laser uses an integrated design to provide you with convenient equipment molding. Whether it is a small studio or a large production line, our laser can be perfectly adapted to help you achieve better results.
RFH
355nm UV laser
How can 355nm UV lasers be used in industrial production?
How can 355nm UV lasers be used in industrial production?   In modern industrial production, laser is an indispensable part. As the requirements for processing accuracy become more and more detailed, lasers are deeply involved in industrial links such as marking and cutting.
355nm UV laser
Laser engraving glass
Laser engraving glass, green laser or UV laser, which is better
Laser engraving glass, green laser or UV laser, which is better   At present, green lasers are widely used in the production of marking and engraving beer glasses, so many manufacturers have accelerated the promotion of production lines, and in fact, RFH UV lasers can also mark on glass.
Laser engraving glass
Get the latest offers Subscribe for our newsletter

Please read on, stay posted, subscribe, and we welcome you to tell us what you think.

Leave A Message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

About

contact