10W-15W uv laser

RFH nanosecond solid-state UV laser has high repetition rate and efficient cutting of FPC cover film

RFH nanosecond solid-state UV laser has high repetition rate and efficient cutting of FPC cover film

15 years of ingenious forging of high-power UV laser, narrow pulse width, high-precision cutting of FPC cover film

What are the advantages of 15w nanosecond solid-state UV laser to make FPC cover film cutting easier

 

Nanosecond solid-state UV laser is used for FPC cover film cutting, laser marking has the characteristics of high repetition rate, high frequency and narrow pulse width, so it can achieve efficient processing, and customers love it

  • Laser Wavelength:

    354.7nm
  • Average Output Power :

    10W/12W/15W @40kHz
  • Pulse Width:

    <20ns @40kHz
  • Pulse Repetition Rate :

    10-200kHz
  • Spatial Mode:

    TEM00
  • Beam Quality (㎡) :

    <1.2
  • Beam Diameter:

    0.8±0.1mm Measured at window
  • Beam Full Divergence Angle :

    <2mrad
  • Beam Circularity:

    >90%
  • Pulse-To-Pulse Stability:

    <3% RMS/@30kHz
  • Average Power Stability :

    <5% RMS/8hr
  • Beam-Pointing Drift:

    <25μrad/℃
  • Polarization Ratio:

    >100:1
  • Polarization Orientation:

    Horizontal
  • Operating Temp. & RH:

    10℃ to 35℃ | <80%
  • Storage Temp. & RH:

    10℃ to 35℃ | <90 %
  • Electricity Requirement :

    100-240VAC |50/60Hz | Single phase
  • Power Consumption:

    <800W
  • Warranty :

    18months
  • Product Detail
  • Video

uv laser

RFH nanosecond solid-state UV laser has high repetition rate and efficient cutting of FPC cover film

 

Website: http://www.rfhtech.com

Whatsapp(Wechat): 18928466502

Email: export06@rfhlasertech.com

 

RFH nanosecond solid-state UV laser has high repetition rate and efficient cutting of FPC cover film

15 years of ingenious forging of high-power UV laser, narrow pulse width, high-precision cutting of FPC cover film

What are the advantages of 15w nanosecond solid-state UV laser to make FPC cover film cutting easier

 

Nanosecond solid-state UV laser is used for FPC cover film cutting, laser marking has the characteristics of high repetition rate, high frequency and narrow pulse width, so it can achieve efficient processing, and customers love it

FPC is a flexible circuit board, which is made of polyimide or polyester film Russian-Japanese base material, with high reliability and flexibility. The printed circuit board has high linear density, light weight and thin thickness. And good bending characteristics, very popular in the electronic market.

For the cutting of FPC cover films, RFH nanosecond solid-state UV lasers have considerable experience. Nanosecond solid-state UV laser is a laser designed by RFH for special materials based on more than ten years of laser research and development. Its laser marking has a higher repetition rate and higher frequency, which can achieve efficient processing and is very suitable for assembly line production. The nanosecond solid-state UV laser can emit UV laser, which is projected on the FPC cover film and then scratched. Through high temperature rapid cutting, the short pulse makes its processing area limited, and the accuracy is always maintained at about 0.2mm, which fully meets the requirements of small and thin The processing needs of FPC cover film. In addition, the processing heat affected area of ​​the RFH nanosecond solid-state UV laser is small, and the laser beam energy will not substantially deform the material or cause scorching, which can greatly save processing materials and costs.

The RFH nanosecond ultraviolet laser has helped many manufacturers to cut FPC cover films, helping them to quickly find ways to improve production efficiency, speeding up production efficiency and greatly improving benefits.

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related products
K-6 Integrated UV Laser 4W-6W
K-6 Integrated UV Laser 4W-6W-8W
K-6 series UV DPSS laser, developed and produced by RFH, covers 4W/6W/8W in laser power with short pulse width (<20ns@30K) ,superior beam quality (M²<1.2) and perfect laser spot quality (beam circularity >90%). K-6 series laser is ideal for high-end ultra-precise processing as well as marking in mobile phone shell , package of cosmetics, food, medicine and other high polymer materials, PCB, LCD, glassware surface, metal’s cladding material, plastic keypad, electronic component, gift, communication device, construction material and other areas.
Download datasheet
K-6 Integrated UV Laser 4W-6W
Why RFH UV laser is often used in laser marking plastic button switch?
Why RFH UV laser is often used in laser marking plastic button switch
Why RFH UV laser is often used in laser marking plastic button switch? More and more manufacturers choose UV laser marking machine to create pattern and characters on the plastic button switch. The focal spot of UV laser is pretty small with little heat transfer to surrounding material, so UV laser is also called “cold light source”. Because of this feature, heat effect won’t occur. Thus, distorting or burning of materials is no longer an issue.    Professional UV laser manufacturer - Shenzhen RFH Laser Technology Co.,Ltd    With 13 years of experience, the S9 series nanosecond UV laser developed and produced by RFH can engrave clear characters on the keyboard and the mouse. These kinds of characters can not only help people identify different buttons in the dark but also last long, for there are slightly protruding part on the buttons. This improves the durability and practicability of the keyboard and the mouse.   
Why RFH UV laser is often used in laser marking plastic button switch?
UV laser
UV laser featuring cold processing for marking plastic button on keyboard
 UV laser featuring cold processing for marking plastic button on keyboard More and more manufacturers choose UV laser marking machine to create pattern and characters on the plastic button switch. The focal spot of UV laser is pretty small with little heat transfer to surrounding material, so UV laser is also called “cold light source”. Because of this feature, heat effect won’t occur. Thus, distorting or burning of materials is no longer an issue.    Professional UV laser manufacturer - Shenzhen RFH Laser Technology Co.,Ltd    With 13 years of experience, the S9 series nanosecond UV laser developed and produced by RFH can engrave clear characters on the keyboard and the mouse. These kinds of characters can not only help people identify different buttons in the dark but also last long, for there are slightly protruding part on the buttons. This improves the durability and practicability of the keyboard and the mouse.   
UV laser
355nm UV laser
How can 355nm UV lasers be used in industrial production?
How can 355nm UV lasers be used in industrial production?   In modern industrial production, laser is an indispensable part. As the requirements for processing accuracy become more and more detailed, lasers are deeply involved in industrial links such as marking and cutting.
355nm UV laser
Laser engraving glass
Laser engraving glass, green laser or UV laser, which is better
Laser engraving glass, green laser or UV laser, which is better   At present, green lasers are widely used in the production of marking and engraving beer glasses, so many manufacturers have accelerated the promotion of production lines, and in fact, RFH UV lasers can also mark on glass.
Laser engraving glass
cuts diamonds
RFH 3W 5W 10W UV laser cuts diamonds, smooth without bursting
RFH 3W 5W 10W UV laser  cuts diamonds, smooth without bursting   Diamonds are one of the most high-end luxury goods. They are not only bright and look very bright, but also are one of the hardest substances in the world and have a very high collection value.
cuts diamonds
Marking Plastics
RFH 355nm UV Laser Cold Light Source Marking Plastics, No Carbonization, No Burning
RFH 355nm UV Laser Cold Light Source Marking Plastics, No Carbonization, No Burning   In the surface marking of plastics, there are always problems such as material being scorched, but the research and development of RFH 355nm UV laser has completely solved this problem, allowing more small and medium-sized growth enterprises whose main business is plastic marking to survive and room for development.
Marking Plastics
marking plastic auto parts
UV nanosecond laser marking plastic auto parts, accompany you to travel safely
UV nanosecond laser marking plastic auto parts, accompany you to travel safely   The development of automobiles has greatly facilitated human life, and the research and development of new energy vehicles has combined greenness and convenience. Plastic auto parts occupy an important position in the development and installation of automobiles, but the complex shape and a large number of demands make the marking of characters more complicated, and the RFH UV nanosecond laser can solve this problem very well.
marking plastic auto parts
Get the latest offers Subscribe for our newsletter

Please read on, stay posted, subscribe, and we welcome you to tell us what you think.

Leave A Message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

About

contact