10W-15W uv laser

RFH 5W UV Nanosecond Laser Marking Ceramics

The appearance of RFH 5w UV laser at several recent ceramic expos was very eye-catching. On the spot, RFH provided a machine model and demonstrated the marking process of a ceramic teapot.

  • Laser Wavelength:

    354.7nm
  • Average Output Power :

    3W-10W @30kHz
  • Pulse Width:

    <12ns @ 30kHz
  • Pulse Repetition Rate :

    10-200kHz
  • Beam Quality (㎡) :

    <1.2
  • Beam Diameter :

    0.8±0.2mm Measured at window
  • Beam Full Divergence Angle :

    <2mrad
  • Beam Circularity :

    >90%
  • Pulse-to-Pulse Stability :

    <2% RMS/@30kHz
  • Average Power Stability :

    <5% RMS/8hr
  • Beam-Pointing Drift :

    <30μrad/℃
  • Polarization Ratio :

    >100:1
  • Polarization Orientation :

    Horizontal
  • Operating Temp. & RH :

    10℃ to 30℃ | <80%
  • Storage Temp. & RH) :

    -20℃ to 65℃ | <90 %
  • Electricity Requirement :

    100-240VAC |50/60Hz | Single phase
  • Power Consumption :

    <500W
  • Warranty :

    18months
  • Product Detail
  • Video

uv laser

RFH 5W UV Nanosecond Laser Marking Ceramics

 

Ceramic art is a representative traditional craft in ancient China. It plays a very important role in China's literary history and cultural development, and plays an important role in foreign trade and cultural communication. Modern ceramic technology is moving towards automation, and the development of ceramic marking is also rising.

 

The appearance of RFH 5w UV laser at several recent ceramic expos was very eye-catching. On the spot, RFH provided a machine model and demonstrated the marking process of a ceramic teapot.

355 Nm UV Laser Cold Light Source Marking ceramics

It can be seen that the RFH ultraviolet laser emits a very small light spot, leaving the required pattern on the drawing after passing through the surface of the ceramic teapot, and the positioning and accuracy of the pattern have reached about 0.02mm, which fully meets the requirements of ceramic customization in the current market , and the marking speed is extremely fast, capable of mass production.

 

In addition, RFH independently developed the Q-switching technology, which uses the combined effect of air cooling and water cooling to quickly cool down, and can automatically run the program without special care. Greatly reduce labor costs and improve production efficiency. The ceramic teapot marked by RFH on site satisfied many customers who participated in the exhibition and expressed the intention of cooperation.

 

After more than ten years of research and development of RFH ultraviolet lasers, it has helped and supported the development of ceramic marking in my country to the greatest extent, and has brought ceramic technology to a higher level.

What is the function of 5w UV laser?

 

According to market development needs, Shenzhen RFH Laser Technology Co., Ltd. newly launched S9 series 5w lasers including water-cooled and air-cooled. Compared with similar products, the S9 series is smaller in size, more refined in design, and more stable in light output. The small and exquisite design means that users do not need to enlarge the optical path, which can greatly reduce costs and save space, and can be easily installed in flying marking equipment. The S9 UV laser is not only small in size, but also has a more stable cavity structure and stronger expandability than similar products. The same cavity can generate lasers of various powers, and the stability of different power ranges has been greatly improved

 

Features of the new S9 UV laser:

1. The laser wavelength is 354.7nm, and the repetition frequency covers a wide range (10kHz to 200kHz); the power range is 3.0w~10.0w

2. Superior beam quality (M²<1.2), strictly guaranteed in all frequency ranges; pulse width<12ns@30k, small heat-affected area during processing

3. The unique Q-switching control technology is suitable for various laser application control requirements; the laser has a longer life and more stable operation.

4. Full digital intelligent power control technology, simple operation and convenient monitoring

5. Support communication with computer, external control of laser through RS232; integrated design, convenient for equipment integration

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related products
K-6 Integrated UV Laser 4W-6W
K-6 Integrated UV Laser 4W-6W-8W
K-6 series UV DPSS laser, developed and produced by RFH, covers 4W/6W/8W in laser power with short pulse width (<20ns@30K) ,superior beam quality (M²<1.2) and perfect laser spot quality (beam circularity >90%). K-6 series laser is ideal for high-end ultra-precise processing as well as marking in mobile phone shell , package of cosmetics, food, medicine and other high polymer materials, PCB, LCD, glassware surface, metal’s cladding material, plastic keypad, electronic component, gift, communication device, construction material and other areas.
Download datasheet
K-6 Integrated UV Laser 4W-6W
Why RFH UV laser is often used in laser marking plastic button switch?
Why RFH UV laser is often used in laser marking plastic button switch
Why RFH UV laser is often used in laser marking plastic button switch? More and more manufacturers choose UV laser marking machine to create pattern and characters on the plastic button switch. The focal spot of UV laser is pretty small with little heat transfer to surrounding material, so UV laser is also called “cold light source”. Because of this feature, heat effect won’t occur. Thus, distorting or burning of materials is no longer an issue.    Professional UV laser manufacturer - Shenzhen RFH Laser Technology Co.,Ltd    With 13 years of experience, the S9 series nanosecond UV laser developed and produced by RFH can engrave clear characters on the keyboard and the mouse. These kinds of characters can not only help people identify different buttons in the dark but also last long, for there are slightly protruding part on the buttons. This improves the durability and practicability of the keyboard and the mouse.   
Why RFH UV laser is often used in laser marking plastic button switch?
UV laser
UV laser featuring cold processing for marking plastic button on keyboard
 UV laser featuring cold processing for marking plastic button on keyboard More and more manufacturers choose UV laser marking machine to create pattern and characters on the plastic button switch. The focal spot of UV laser is pretty small with little heat transfer to surrounding material, so UV laser is also called “cold light source”. Because of this feature, heat effect won’t occur. Thus, distorting or burning of materials is no longer an issue.    Professional UV laser manufacturer - Shenzhen RFH Laser Technology Co.,Ltd    With 13 years of experience, the S9 series nanosecond UV laser developed and produced by RFH can engrave clear characters on the keyboard and the mouse. These kinds of characters can not only help people identify different buttons in the dark but also last long, for there are slightly protruding part on the buttons. This improves the durability and practicability of the keyboard and the mouse.   
UV laser
355nm UV laser
How can 355nm UV lasers be used in industrial production?
How can 355nm UV lasers be used in industrial production?   In modern industrial production, laser is an indispensable part. As the requirements for processing accuracy become more and more detailed, lasers are deeply involved in industrial links such as marking and cutting.
355nm UV laser
Laser engraving glass
Laser engraving glass, green laser or UV laser, which is better
Laser engraving glass, green laser or UV laser, which is better   At present, green lasers are widely used in the production of marking and engraving beer glasses, so many manufacturers have accelerated the promotion of production lines, and in fact, RFH UV lasers can also mark on glass.
Laser engraving glass
cuts diamonds
RFH 3W 5W 10W UV laser cuts diamonds, smooth without bursting
RFH 3W 5W 10W UV laser  cuts diamonds, smooth without bursting   Diamonds are one of the most high-end luxury goods. They are not only bright and look very bright, but also are one of the hardest substances in the world and have a very high collection value.
cuts diamonds
Marking Plastics
RFH 355nm UV Laser Cold Light Source Marking Plastics, No Carbonization, No Burning
RFH 355nm UV Laser Cold Light Source Marking Plastics, No Carbonization, No Burning   In the surface marking of plastics, there are always problems such as material being scorched, but the research and development of RFH 355nm UV laser has completely solved this problem, allowing more small and medium-sized growth enterprises whose main business is plastic marking to survive and room for development.
Marking Plastics
marking plastic auto parts
UV nanosecond laser marking plastic auto parts, accompany you to travel safely
UV nanosecond laser marking plastic auto parts, accompany you to travel safely   The development of automobiles has greatly facilitated human life, and the research and development of new energy vehicles has combined greenness and convenience. Plastic auto parts occupy an important position in the development and installation of automobiles, but the complex shape and a large number of demands make the marking of characters more complicated, and the RFH UV nanosecond laser can solve this problem very well.
marking plastic auto parts
Get the latest offers Subscribe for our newsletter

Please read on, stay posted, subscribe, and we welcome you to tell us what you think.

Leave A Message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

About

contact