10W-15W uv laser
Products
Home

Knowledge

 RFH 3W 10W 355nm UV Laser Marking Router Plastic Case

Laser Marking Router Plastic Case
Laser Marking Router Plastic Case Laser Marking Router Plastic Case Laser Marking Router Plastic Case Laser Marking Router Plastic Case

RFH 3W 10W 355nm UV Laser Marking Router Plastic Case

Manager Liu from an electronics factory in Shenzhen happened to come to RFH recently for investigation and investigation. Their company’s main product is a router, so they chose RFH’s nanosecond ultraviolet laser S9 to mark relevant product information on the plastic casing of their products. .

  • Laser Wavelength:

    354.7nm

  • Average Output Power :

    3W-10W @30kHz

  • Pulse Width:

    <12ns @ 30kHz

  • Pulse Repetition Rate :

    10-200kHz

  • Beam Quality (㎡) :

    <1.2

  • Beam Diameter :

    0.8±0.2mm Measured at window

  • Beam Full Divergence Angle :

    <2mrad

  • Beam Circularity :

    >90%

  • Pulse-to-Pulse Stability :

    <2% RMS/@30kHz

  • Average Power Stability :

    <5% RMS/8hr

  • Beam-Pointing Drift :

    <30μrad/℃

  • Polarization Ratio :

    >100:1

  • Polarization Orientation :

    Horizontal

  • Operating Temp. & RH :

    10℃ to 30℃ | <80%

  • Storage Temp. & RH) :

    -20℃ to 65℃ | <90 %

  • Electricity Requirement :

    100-240VAC |50/60Hz | Single phase

  • Power Consumption :

    <500W

  • Warranty :

    18months
Inquire now
banner
  • Product Detail
  • Video

uv laser

RFH 3W 10W 355nm UV Laser Marking Router Plastic Case

 

In this era of extremely rich material products, product homogeneity is serious, and manufacturers who pay more attention to product details will be more favored by the consumer market. Even the label information on the product shell can reflect a manufacturer's intentions . Manufacturers who are aware of this generally have a long-term development vision. They will strive for excellence in every aspect of product manufacturing. Even the laser for marking the product body will travel thousands of miles to seek the most suitable supplier for cooperation. .

 

The nanosecond ultraviolet laser developed and produced by RFH is very good at marking and engraving on plastics and other materials, so it also maintains long-term and close cooperation with many manufacturers with related needs.

 

Manager Liu from an electronics factory in Shenzhen happened to come to RFH recently for investigation and investigation. Their company’s main product is a router, so they chose RFH’s nanosecond ultraviolet laser S9 to mark relevant product information on the plastic casing of their products. .

 

The S9 nanosecond UV laser is small in size, exquisite in design, and stable in output. The small and exquisite design means that users do not need to enlarge the optical path, which can greatly reduce costs and save space, and can be easily installed in flying marking equipment. The S9 UV laser is not only small in size, but also has a more stable cavity structure and stronger expandability than similar products. The same cavity can generate lasers of various powers, and the stability of different power ranges has been greatly improved.

 

Manager Liu said that RFH’s UV laser adopts all-digital intelligent power control technology. The machine is easy to operate and convenient to monitor. The marking effect is clear and unobtrusive, and it is integrated with the product, which invisibly improves the quality of the product and focuses on details. , so that their products have been upgraded, which is very recognized by consumers.

uv laser

 

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related products
K-6 Integrated UV Laser 4W-6W
K-6 Integrated UV Laser 4W-6W-8W
K-6 series UV DPSS laser, developed and produced by RFH, covers 4W/6W/8W in laser power with short pulse width (<20ns@30K) ,superior beam quality (M²<1.2) and perfect laser spot quality (beam circularity >90%). K-6 series laser is ideal for high-end ultra-precise processing as well as marking in mobile phone shell , package of cosmetics, food, medicine and other high polymer materials, PCB, LCD, glassware surface, metal’s cladding material, plastic keypad, electronic component, gift, communication device, construction material and other areas.
Download datasheet
K-6 Integrated UV Laser 4W-6W
Learn More
Why RFH UV laser is often used in laser marking plastic button switch?
Why RFH UV laser is often used in laser marking plastic button switch
Why RFH UV laser is often used in laser marking plastic button switch? More and more manufacturers choose UV laser marking machine to create pattern and characters on the plastic button switch. The focal spot of UV laser is pretty small with little heat transfer to surrounding material, so UV laser is also called “cold light source”. Because of this feature, heat effect won’t occur. Thus, distorting or burning of materials is no longer an issue.    Professional UV laser manufacturer - Shenzhen RFH Laser Technology Co.,Ltd    With 13 years of experience, the S9 series nanosecond UV laser developed and produced by RFH can engrave clear characters on the keyboard and the mouse. These kinds of characters can not only help people identify different buttons in the dark but also last long, for there are slightly protruding part on the buttons. This improves the durability and practicability of the keyboard and the mouse.   
Why RFH UV laser is often used in laser marking plastic button switch?
Learn More
UV laser
UV laser featuring cold processing for marking plastic button on keyboard
 UV laser featuring cold processing for marking plastic button on keyboard More and more manufacturers choose UV laser marking machine to create pattern and characters on the plastic button switch. The focal spot of UV laser is pretty small with little heat transfer to surrounding material, so UV laser is also called “cold light source”. Because of this feature, heat effect won’t occur. Thus, distorting or burning of materials is no longer an issue.    Professional UV laser manufacturer - Shenzhen RFH Laser Technology Co.,Ltd    With 13 years of experience, the S9 series nanosecond UV laser developed and produced by RFH can engrave clear characters on the keyboard and the mouse. These kinds of characters can not only help people identify different buttons in the dark but also last long, for there are slightly protruding part on the buttons. This improves the durability and practicability of the keyboard and the mouse.   
UV laser
Learn More
RFH
S9-Y-355-10-40-T
This series of lasers is specially designed for laser marking machines, precision cutting machines, precision drilling machines, laser stripping machine, glass inner winning machine and pan painting equipment. It can meet the laser needs of various applications. The laser wavelength is 354.7 nm, the repetition frequency range is wide, can cover 10kHz to 200kHz. The power range is from 3.0 W to 10.0 W. Importantly, our laser strictly guarantees superior beam quality in all frequency ranges, with m' less than 1.2. This means that our lasers provide excellent beam quality regardless of the frequency used. In addition, our laser has a very small pulse width, less than 12 ns at 30 khz. This means that the heat affected area during processing is small, ensuring accuracy and quality of the results. We adopt a unique q-switched control technology to meet the control requirements of various laser applications. At the same time, our intelligent power control technology makes the operation and monitoring of the laser easy and convenient. You can also communicate with your computer via RS232 to externally control our lasers. Integrated design for easy integration with equipment. Whether you need laser marking, precision cutting, close drilling, laser stripping, glass inner victory or pan judgment paint, our S9-Y-355-10-40-T series lasers can provide you with high-quality laser performance and stable and reliable work.
RFH
Learn More
RFH
Exper III-Y-532-40-50
Shenzhen RFH Laser Technology Co., Ltd. has launched the new Exper III-Y series green laser in 2024. This series features a water-cooled design and is a medium-power nanosecond pulsed 532nm green solid-state laser. It is specifically designed to meet the needs of high-speed precision laser processing production lines, ensuring efficiency and long-term stability and reliability. With its excellent performance and stability, the Exper III-Y series laser will play a crucial role in the field of precision processing, bringing new technological breakthroughs and application prospects to the industry.  
RFH
Learn More
RFH
ExpertIII 355-15-50
Specializing in the field of high-precision processing, EXPERTIII 355-15-50 series lasers to provide you with a comprehensive and high-quality solution. Whether it is PE/PCB/FPC cutting, or glass, sapphire cutting, or high-definition micro-processing of drilling, marking, cutting, etc. , our laser can meet your needs. Our laser uses an efficient wavelength of 354.7 nm, covering a wide range of repetitive frequencies (10 khz to 200 khz) . Regardless of your application scenario, we provide excellent beam quality (m & LT; 1.2) . Moreover, we guarantee the consistency of beam quality in all frequency range. To minimize the heat-affected region, our laser uses a pulse width of less than 20ns@40k. This means that even at high frequencies, the processing is still excellent. In addition, we also use a unique q-switched control technology to meet the needs of various laser applications, in order to ensure the long life and stable operation of the laser, we also use the internal cavity self-purification system. This makes our laser not only long life, but also stable and reliable operation, in order to facilitate the operation and monitoring, we use the digital intelligent power control technology. This makes your operation easier and allows you to monitor the status of the laser in real time; in addition, our laser also supports communication with the computer and can be controlled externally through the R5232. This gives you more convenience and flexibility in your work. Our EXPERTIII 355-15-50 laser uses an integrated design to provide you with convenient equipment molding. Whether it is a small studio or a large production line, our laser can be perfectly adapted to help you achieve better results.
RFH
Learn More
355nm UV laser
How can 355nm UV lasers be used in industrial production?
How can 355nm UV lasers be used in industrial production?   In modern industrial production, laser is an indispensable part. As the requirements for processing accuracy become more and more detailed, lasers are deeply involved in industrial links such as marking and cutting.
355nm UV laser
Learn More
Laser engraving glass
Laser engraving glass, green laser or UV laser, which is better
Laser engraving glass, green laser or UV laser, which is better   At present, green lasers are widely used in the production of marking and engraving beer glasses, so many manufacturers have accelerated the promotion of production lines, and in fact, RFH UV lasers can also mark on glass.
Laser engraving glass
Learn More
Get the latest offers Subscribe for our newsletter

Please read on, stay posted, subscribe, and we welcome you to tell us what you think.

As the leading industrial solid-state laser manufacturer, RFH laser company offer 355nm ultraviolet laser, 532nm green laser and customized laser for a broad range of commercial, industrial, and scientific applications.
Contacts
Copyright © 2024  The leading solid state laser manufacturer All Rights Reserved.
Sitemap | XML | IPv6 network supported
Leave A Message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

About

contact