RFH 15W High -power UV laser cutting carbon fiber
On the evergreen trees in the material industry, carbon fiber must be well deserved. Although the annual price is high, the excellent performance is rarely replaced.
The use of carbon fiber materials is very wide, but for so many years, it is rarely heard of tools specifically used to cut carbon fiber. Because of difficulty in processing, processing methods are difficult to conclude.
In addition, due to the high trial and error cost, you cannot try blindly when cutting carbon fibers.
At present, the traditional cutting method is nothing more than mechanical cutting and water cutting. In the past two years, there are ultrasound cutting.
The above cutting methods are easy to use in the face of carbon fiber composite plates, but it is difficult to start when some "heterosexual skeleton" is put in front of it.
Laser cutting is also a very hot way of cutting in the past two years, especially when facing the alien skeleton.
In the past, laser cannot be the mainstream method of cutting carbon fiber, mainly caused by two reasons:
1. Laser power is small, and the applicable surface is narrow
2. The cutting surface is burning obvious, and the power control is unstable
However, when the "laser is not suitable for cutting carbon fiber" is over, with the technical breakthrough of high -power ultraviolet laser, cutting carbon fiber, especially in the face of alien materials, is more ease.
Advantages of high -power ultraviolet laser cutting carbon fiber:
RFH laser uses 15W high -power ultraviolet laser, quickly and efficiently cut the carbon fiber skeleton, and carefully observe the burning marks on the edge.
RFH uses a special power control system for independent development, which can accurately control the laser power, and it is convenient to use, and easily adjust the functional module according to different scenarios.
The two factors affecting the cutting accuracy are beam quality and pulse width; RFH has superior beam quality (M2 <1.2), and the pulse width <25ns@50K, which has a small heat effect during processing, so you cannot see burning on the edge of the edge. trace.
Compared with the traditional processing method, laser can be able to achieve more than the advantages of non -contact with the advantages of non -contact. As long as the power is accurate, you can explore a new direction on the road of carbon fiber processing.
Touch the future, explore the new direction of carbon fiber processing
Laser -cut carbon fiber is a new exploration in the context of intelligent manufacturing. Although there are also laser in the past, the effects are mostly not satisfactory. RFH explores ultraviolet high power and can perfectly solve many problems with existing existing.
Because RFH uses ultraviolet laser, compared to green light and infrared, purple light belongs to "cold light", and there is less thermal effects, so it is very suitable for this precision processing.
In recent years, due to the rapid development of the RFH ultra -short pulse laser, a large number of high -power applications, breaking through the power technology barriers, have already touched the future.
Facing the carbon fiber skeleton that is difficult to process, when the water knife and ultrasonic waves are defeated, the RFH "slap the hard bone" through high -power ultraviolet solid laser.
In the RFH product line, Expert III 355 belongs to a star product of high -power ultraviolet laser, with a small size but powerful.
Due to the unique laser cavity design, sound light q technology, and high -precision cooling system, the integration is very high, which is convenient for integration with equipment.
RFH's ingenuity for more than 15 years, constant innovation, has a dedicated power control system independently developed, continuously breaks through the technical barriers, and will not stop.