10W-15W uv laser

Marking, cutting and drilling all rely on RFH high power UV lasers

Marking, cutting and drilling all rely on RFH high power UV lasers

 

The wide application of lasers has become a consensus. In the processing industry, operations such as marking, micro-cutting, internal engraving, and drilling all rely on lasers, but the lasers required in different application fields are different.

  • Laser Wavelength:

    354.7nm
  • Average Output Power :

    10W/12W/15W @40kHz
  • Pulse Width:

    <20ns @40kHz
  • Pulse Repetition Rate :

    10-200kHz
  • Spatial Mode:

    TEM00
  • Beam Quality (㎡) :

    <1.2
  • Beam Diameter:

    0.8±0.1mm Measured at window
  • Beam Full Divergence Angle :

    <2mrad
  • Beam Circularity:

    >90%
  • Pulse-To-Pulse Stability:

    <3% RMS/@30kHz
  • Average Power Stability :

    <5% RMS/8hr
  • Beam-Pointing Drift:

    <25μrad/℃
  • Polarization Ratio:

    >100:1
  • Polarization Orientation:

    Horizontal
  • Operating Temp. & RH:

    10℃ to 35℃ | <80%
  • Storage Temp. & RH:

    10℃ to 35℃ | <90 %
  • Electricity Requirement :

    100-240VAC |50/60Hz | Single phase
  • Power Consumption:

    <800W
  • Warranty :

    18months
  • Product Detail
  • Video

uv laser

Marking, cutting and drilling all rely on RFH high power UV lasers

 

Website: http://www.rfhtech.com

Whatsapp(Wechat): 18928466502

Email: export06@rfhlasertech.com

 

The wide application of lasers has become a consensus. In the processing industry, operations such as marking, micro-cutting, internal engraving, and drilling all rely on lasers, but the lasers required in different application fields are different.

 

15w20w high-power ultraviolet laser is equipped with self-developed power supply system, you can use it with confidence

 

For operations such as marking, flying oil, and laser wire stripping, a 3W~10W low-power UV laser is more than enough. However, high-power UV lasers are also widely used in operations such as sapphire cutting, glass deep engraving, and PE/PCB/FPC micro-cutting, and have higher processing efficiency.

In many processing fields, 10W+ high-power UV lasers have the characteristics of high precision, fast speed and high stability, but not every manufacturer can challenge high power.

Difficulty with high power lasers:

 

In the past, high-power lasers relied heavily on imports because of the high difficulty in production, especially the power supply and heat dissipation parts, which required extremely high development requirements.

 

On the surface, it seems that the power is only increased, but the supporting facilities must keep up, otherwise there will be the problem of "walking on one leg", and the final result is not satisfactory, and it is prone to problems such as low beam quality and weak heat dissipation.

 

Advantages of high power UV lasers:

 

Although high-power ultraviolet lasers are difficult, the demand for independent research and development still exists, because the power increase has great advantages.

 

1. Improve processing efficiency

In the field of industrial processing, high power = high economic benefits, increased power, naturally improved processing efficiency, and guaranteed production quality. The most direct impact is to improve the economic benefits of the factory.

 

2. The scope of application is increased

For low-power UV lasers, the materials and methods that can be processed are still limited. If the power is increased, operations such as sapphire or glass deep engraving can be easily accomplished.

 

3. Excellent edge quality

Although the power is only increased, the cutting is fast, and the decisive cutting and punching methods make the edges smooth, which can significantly reduce the generation of burrs and improve the yield.

 

Recommended Product: RFH Expert III 355 High Power UV Pulsed Solid State Laser

 

When developing high-power UV lasers, the biggest difficulty and challenge is the power supply design. RFH has the technical advantages of independent research and development of power supplies, and has designed a stable and efficient Expert III 355 high-power UV pulsed solid-state laser.

 

In terms of design, RFH adopts unique Q-switching control technology, the laser wavelength is 354.7nm, and the repetition frequency covers a wide range (10kHz to 200kHz), which is suitable for various laser application control needs.

 

The high-power ultraviolet laser developed by the RFH professor and doctoral team is easy to use

 

In addition, in all frequency ranges, the Expert III 355 high-power UV pulsed solid-state laser can guarantee superior beam quality (M2<1.2), pulse width <25ns@50k, and small heat-affected zone during processing.

Under such a high-standard laser quality, the Expert III 355 high-power UV pulsed solid-state laser controls the volume to an extremely small size through a highly integrated body design, and ensures long-term stable operation through a high-precision cooling system.

 

In terms of software, due to the use of all-digital intelligent power control technology, it can be controlled uniformly through a computer, and the laser can be controlled by an external RS232 controller, which is convenient for later maintenance.

 

RFH ingenious forging, high power UV laser

 

RFH has a strong domestic and foreign experts, doctoral R&D team, and more than 15 years of R&D experience. Through the advantages of independent research and development of power supply technology, as a classic product, the Expert III 355 high-power ultraviolet pulsed solid-state laser has been used in many fields. Wide range of applications.

 

In the domestic laser field, RFH has unique technical advantages, and strictly controls the quality control to ensure that each product has the highest quality assurance.

 

 

RFH ingenious forging, Expert III 355 high-power UV pulsed solid-state laser.

uv laser | green laser | Ultraviolet lasers | uv dpss laser | nanosecond laser | UV laser source | Solid State Lasers

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related products
K-6 Integrated UV Laser 4W-6W
K-6 Integrated UV Laser 4W-6W-8W
K-6 series UV DPSS laser, developed and produced by RFH, covers 4W/6W/8W in laser power with short pulse width (<20ns@30K) ,superior beam quality (M²<1.2) and perfect laser spot quality (beam circularity >90%). K-6 series laser is ideal for high-end ultra-precise processing as well as marking in mobile phone shell , package of cosmetics, food, medicine and other high polymer materials, PCB, LCD, glassware surface, metal’s cladding material, plastic keypad, electronic component, gift, communication device, construction material and other areas.
Download datasheet
K-6 Integrated UV Laser 4W-6W
Why RFH UV laser is often used in laser marking plastic button switch?
Why RFH UV laser is often used in laser marking plastic button switch
Why RFH UV laser is often used in laser marking plastic button switch? More and more manufacturers choose UV laser marking machine to create pattern and characters on the plastic button switch. The focal spot of UV laser is pretty small with little heat transfer to surrounding material, so UV laser is also called “cold light source”. Because of this feature, heat effect won’t occur. Thus, distorting or burning of materials is no longer an issue.    Professional UV laser manufacturer - Shenzhen RFH Laser Technology Co.,Ltd    With 13 years of experience, the S9 series nanosecond UV laser developed and produced by RFH can engrave clear characters on the keyboard and the mouse. These kinds of characters can not only help people identify different buttons in the dark but also last long, for there are slightly protruding part on the buttons. This improves the durability and practicability of the keyboard and the mouse.   
Why RFH UV laser is often used in laser marking plastic button switch?
UV laser
UV laser featuring cold processing for marking plastic button on keyboard
 UV laser featuring cold processing for marking plastic button on keyboard More and more manufacturers choose UV laser marking machine to create pattern and characters on the plastic button switch. The focal spot of UV laser is pretty small with little heat transfer to surrounding material, so UV laser is also called “cold light source”. Because of this feature, heat effect won’t occur. Thus, distorting or burning of materials is no longer an issue.    Professional UV laser manufacturer - Shenzhen RFH Laser Technology Co.,Ltd    With 13 years of experience, the S9 series nanosecond UV laser developed and produced by RFH can engrave clear characters on the keyboard and the mouse. These kinds of characters can not only help people identify different buttons in the dark but also last long, for there are slightly protruding part on the buttons. This improves the durability and practicability of the keyboard and the mouse.   
UV laser
355nm UV laser
How can 355nm UV lasers be used in industrial production?
How can 355nm UV lasers be used in industrial production?   In modern industrial production, laser is an indispensable part. As the requirements for processing accuracy become more and more detailed, lasers are deeply involved in industrial links such as marking and cutting.
355nm UV laser
Laser engraving glass
Laser engraving glass, green laser or UV laser, which is better
Laser engraving glass, green laser or UV laser, which is better   At present, green lasers are widely used in the production of marking and engraving beer glasses, so many manufacturers have accelerated the promotion of production lines, and in fact, RFH UV lasers can also mark on glass.
Laser engraving glass
cuts diamonds
RFH 3W 5W 10W UV laser cuts diamonds, smooth without bursting
RFH 3W 5W 10W UV laser  cuts diamonds, smooth without bursting   Diamonds are one of the most high-end luxury goods. They are not only bright and look very bright, but also are one of the hardest substances in the world and have a very high collection value.
cuts diamonds
Marking Plastics
RFH 355nm UV Laser Cold Light Source Marking Plastics, No Carbonization, No Burning
RFH 355nm UV Laser Cold Light Source Marking Plastics, No Carbonization, No Burning   In the surface marking of plastics, there are always problems such as material being scorched, but the research and development of RFH 355nm UV laser has completely solved this problem, allowing more small and medium-sized growth enterprises whose main business is plastic marking to survive and room for development.
Marking Plastics
marking plastic auto parts
UV nanosecond laser marking plastic auto parts, accompany you to travel safely
UV nanosecond laser marking plastic auto parts, accompany you to travel safely   The development of automobiles has greatly facilitated human life, and the research and development of new energy vehicles has combined greenness and convenience. Plastic auto parts occupy an important position in the development and installation of automobiles, but the complex shape and a large number of demands make the marking of characters more complicated, and the RFH UV nanosecond laser can solve this problem very well.
marking plastic auto parts
Get the latest offers Subscribe for our newsletter

Please read on, stay posted, subscribe, and we welcome you to tell us what you think.

Leave A Message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

About

contact