Cut the silicone, use RFH UV laser. Ultraviolet laser is RFH. Based on laser research and development for more than ten years, laser is designed for a variety of materials. The repetition rate of laser cutting is higher and the frequency is variable. While realizing efficient processing, there are multiple functions.

Due to the very small size of the IC card, even the most basic cutting and marking are extremely demanding. This IC card, which is about the size of a fingernail, integrates a large number of precision circuits inside. Cutting and marking were high-end technologies back then, so the price of IC cards used to be very high.

The PCB board is currently an important chip and hardware undertaking board in the market, and its area used in electronic equipment is different, resulting in a great difference in the size of its internal marking. Under the recommendation of his peers, Mr. Liu, a PCB board manufacturer, recently came to RFH and visited the whole process of RFH UV laser production.

RFH Ultraviolet UV 355nm Laser Source is the result of RFH's continuous progress and innovation for many years. It emits a laser cold light source to carve on the plastic surface to obtain the required graphics and text. RFH Ultraviolet UV 355nm Laser Source can be connected with computer equipment, draw the desired graphics through software, and turn the drawings into reality through simple software settings.

RFH is such an industrial-grade laser manufacturer that has been cultivating laser technology for fifteen years. The 35W green laser it produces can easily complete the processing work on the surface of most materials such as glass, thin film, and metal.

The marking process on PE film seems to be common, but in fact, to fully meet the requirements of manufacturers and customers, it still needs service providers with many years of R&D and production experience in laser technology and equipment design.

The 532nm water-cooled green diode-pumped pulsed solid-state laser developed and produced by RFH is a series of star products, which have different applicable ranges according to different power ranges, from 18W to 35W, which can be used for ceramic drilling and scribing, glass , Wafer marking, cutting, engraving and marking of metal materials, etc. This series of lasers can be said to be very suitable for completing this series of processing techniques, and it can be said that they are specialized in the industry. With this series of lasers, RFH has widely won the approval of relevant manufacturers.

RFH has been cultivating laser technology for fifteen years. It has excellent laser technology and a rich product line. According to market development needs, RFH Laser's newly launched S9355nm UV Ultraviolet laser is a 355nm UV Ultraviolet laser with different powers from 3-10W. Series of products, the split machine includes water-cooled and air-cooled two. Compared with the same type of products, this series of products has the characteristics of smaller size, more refined design, and more stable light output. The small and exquisite design means that the user does not need to enlarge the optical path, which can greatly reduce the cost and save space, and it can be easily installed in the field of flying marking equipment.

In the past, when processing easily deformable materials such as plastics, lasers were difficult to be the first choice. However, with the gradual maturity of ultraviolet laser technology, lasers are also the first choice for plastic cutting.

The 35W high-power green laser cuts resin lenses effortlessly, and it is very safe and will not damage the lenses, which greatly reduces the loss rate and saves costs for the company. Yuen said that the cooperation with RFH was a long time ago. If RFH's products could be selected a few years earlier, then their own products would definitely be more competitive.

RFH has a high-power UV laser that can lightly mark fragile materials such as ceramics and glass. This high-power UV laser has superior beam quality, and its accuracy and safety are strictly guaranteed in all frequency ranges. The pulse width is less than 20ns@30k, and the heat-affected area is small during processing, which can protect the product from being damaged to the greatest extent. Loss, and can easily complete the marking process.

Fortunately, they soon learned that a high-power green laser from Shenzhen RFH is very good at this operation. Whether it is metal or non-metallic materials, this professional high-power green laser can complete the engraving process with ease. Mr. He also said that the reason why he trusts RFH so much is that RFH’s business philosophy is very similar to that of their own factory, and they are willing to spend everything on one thing. It has been 15 years since RFH has been studying laser technology. I will know in a long time.