10W-15W uv laser

High Power UV Laser Reduces PCB Board Cutting and Drilling, Cutting Costs

High Power UV Laser Reduces PCB Board Cutting and Drilling, Cutting Costs

 

PCB boards are currently used in many electronic devices, and most products that require hardware control panels will choose to use PCB panels for design and development. The cutting and drilling of the PCB panel are relatively important production processes. Only fine cutting and drilling can match the precise product shell, which further improves the durability and installation of the product.

  • Laser Wavelength:

    354.7nm
  • Average Output Power :

    10W/12W/15W @40kHz
  • Pulse Width:

    <20ns @40kHz
  • Pulse Repetition Rate :

    10-200kHz
  • Spatial Mode:

    TEM00
  • Beam Quality (㎡) :

    <1.2
  • Beam Diameter:

    0.8±0.1mm Measured at window
  • Beam Full Divergence Angle :

    <2mrad
  • Beam Circularity:

    >90%
  • Pulse-To-Pulse Stability:

    <3% RMS/@30kHz
  • Average Power Stability :

    <5% RMS/8hr
  • Beam-Pointing Drift:

    <25μrad/℃
  • Polarization Ratio:

    >100:1
  • Polarization Orientation:

    Horizontal
  • Operating Temp. & RH:

    10℃ to 35℃ | <80%
  • Storage Temp. & RH:

    10℃ to 35℃ | <90 %
  • Electricity Requirement :

    100-240VAC |50/60Hz | Single phase
  • Power Consumption:

    <800W
  • Warranty :

    18months
  • Product Detail
  • Video

uv laser

High Power UV Laser Reduces PCB Board Cutting and Drilling, Cutting Costs

 

Website: http://www.rfhtech.com

Whatsapp(Wechat): 18928466502

Email: export06@rfhlasertech.com

 

PCB boards are currently used in many electronic devices, and most products that require hardware control panels will choose to use PCB panels for design and development. The cutting and drilling of the PCB panel are relatively important production processes. Only fine cutting and drilling can match the precise product shell, which further improves the durability and installation of the product.

 

PCB circuit board customers greatly affirm the cutting effect of RFH high power UV laser

 

Mr. Guo from Guangzhou has been cooperating with RFH in the past and ordered multiple RFH UV lasers, so when he wanted to replace the laser this time, he heard that RFH has launched a new high-power UV laser, Expet III 355, and immediately decided to understand and order. The RFH UV laser uses a precision focused spot for processing, which has a very small heat-affected zone for processing. When the spot is radiated on the surface of the material, it cuts instantly, and will not cause problems such as deformation and scorching of the material, and the processing quality is high. In addition to consumables The loss is small.

 

15w 20w high power UV laser cutting PCB smooth without burr

 

The 15w or 20w UV laser is different from the traditional cutting method. Its cutting accuracy is about 0.2mm, which fully meets the current highest standard of PCB cutting, and the PCB it cuts is smooth and burr-free, no need to be corrected during use, and the production quality is at the top level. In addition to the above upgraded parts, RFH's new high-power UV laser can reduce the cost of single parts such as PCB board cutting, drilling, and cutting, greatly improving efficiency and benefits, and helping companies gain greater benefits.

 

High power UV laser cutting PCB board

 

 

Mr. Guo used RFH high-power UV laser to cut PCB boards, and he also quickly sent feedback, expressing great affirmation of the use effect, which also made RFH more confident to promote and open up the market of new UV lasers, to provide help for more enterprises, for The development of lasers goes a step further.

uv laser | green laser | Ultraviolet lasers | uv dpss laser | nanosecond laser | UV laser source | Solid State Lasers

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related products
K-6 Integrated UV Laser 4W-6W
K-6 Integrated UV Laser 4W-6W-8W
K-6 series UV DPSS laser, developed and produced by RFH, covers 4W/6W/8W in laser power with short pulse width (<20ns@30K) ,superior beam quality (M²<1.2) and perfect laser spot quality (beam circularity >90%). K-6 series laser is ideal for high-end ultra-precise processing as well as marking in mobile phone shell , package of cosmetics, food, medicine and other high polymer materials, PCB, LCD, glassware surface, metal’s cladding material, plastic keypad, electronic component, gift, communication device, construction material and other areas.
Download datasheet
K-6 Integrated UV Laser 4W-6W
Why RFH UV laser is often used in laser marking plastic button switch?
Why RFH UV laser is often used in laser marking plastic button switch
Why RFH UV laser is often used in laser marking plastic button switch? More and more manufacturers choose UV laser marking machine to create pattern and characters on the plastic button switch. The focal spot of UV laser is pretty small with little heat transfer to surrounding material, so UV laser is also called “cold light source”. Because of this feature, heat effect won’t occur. Thus, distorting or burning of materials is no longer an issue.    Professional UV laser manufacturer - Shenzhen RFH Laser Technology Co.,Ltd    With 13 years of experience, the S9 series nanosecond UV laser developed and produced by RFH can engrave clear characters on the keyboard and the mouse. These kinds of characters can not only help people identify different buttons in the dark but also last long, for there are slightly protruding part on the buttons. This improves the durability and practicability of the keyboard and the mouse.   
Why RFH UV laser is often used in laser marking plastic button switch?
UV laser
UV laser featuring cold processing for marking plastic button on keyboard
 UV laser featuring cold processing for marking plastic button on keyboard More and more manufacturers choose UV laser marking machine to create pattern and characters on the plastic button switch. The focal spot of UV laser is pretty small with little heat transfer to surrounding material, so UV laser is also called “cold light source”. Because of this feature, heat effect won’t occur. Thus, distorting or burning of materials is no longer an issue.    Professional UV laser manufacturer - Shenzhen RFH Laser Technology Co.,Ltd    With 13 years of experience, the S9 series nanosecond UV laser developed and produced by RFH can engrave clear characters on the keyboard and the mouse. These kinds of characters can not only help people identify different buttons in the dark but also last long, for there are slightly protruding part on the buttons. This improves the durability and practicability of the keyboard and the mouse.   
UV laser
355nm UV laser
How can 355nm UV lasers be used in industrial production?
How can 355nm UV lasers be used in industrial production?   In modern industrial production, laser is an indispensable part. As the requirements for processing accuracy become more and more detailed, lasers are deeply involved in industrial links such as marking and cutting.
355nm UV laser
Laser engraving glass
Laser engraving glass, green laser or UV laser, which is better
Laser engraving glass, green laser or UV laser, which is better   At present, green lasers are widely used in the production of marking and engraving beer glasses, so many manufacturers have accelerated the promotion of production lines, and in fact, RFH UV lasers can also mark on glass.
Laser engraving glass
cuts diamonds
RFH 3W 5W 10W UV laser cuts diamonds, smooth without bursting
RFH 3W 5W 10W UV laser  cuts diamonds, smooth without bursting   Diamonds are one of the most high-end luxury goods. They are not only bright and look very bright, but also are one of the hardest substances in the world and have a very high collection value.
cuts diamonds
Marking Plastics
RFH 355nm UV Laser Cold Light Source Marking Plastics, No Carbonization, No Burning
RFH 355nm UV Laser Cold Light Source Marking Plastics, No Carbonization, No Burning   In the surface marking of plastics, there are always problems such as material being scorched, but the research and development of RFH 355nm UV laser has completely solved this problem, allowing more small and medium-sized growth enterprises whose main business is plastic marking to survive and room for development.
Marking Plastics
marking plastic auto parts
UV nanosecond laser marking plastic auto parts, accompany you to travel safely
UV nanosecond laser marking plastic auto parts, accompany you to travel safely   The development of automobiles has greatly facilitated human life, and the research and development of new energy vehicles has combined greenness and convenience. Plastic auto parts occupy an important position in the development and installation of automobiles, but the complex shape and a large number of demands make the marking of characters more complicated, and the RFH UV nanosecond laser can solve this problem very well.
marking plastic auto parts
Get the latest offers Subscribe for our newsletter

Please read on, stay posted, subscribe, and we welcome you to tell us what you think.

Leave A Message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

About

contact