10W-15W uv laser

High frequency repetitive marking is the advantage of RFH solid-state UV lasers

 

High frequency repetitive marking is the advantage of RFH solid-state UV lasers

The unique function of self-cleaning in the inner cavity makes the RFH UV laser have a longer life and more stable

 

 

As long as lasers are mentioned, everyone may think of the same thing. It seems that all lasers have the same origin, but in fact they are different, including but not limited to CO2 lasers, red light, green light, and today's protagonist ultraviolet laser.

  • Laser Wavelength:

    354.7nm
  • Average Output Power :

    3W-10W @30kHz
  • Pulse Width:

    <12ns @ 30kHz
  • Pulse Repetition Rate :

    10-200kHz
  • Beam Quality (㎡) :

    <1.2
  • Beam Diameter :

    0.8±0.2mm Measured at window
  • Beam Full Divergence Angle :

    <2mrad
  • Beam Circularity :

    >90%
  • Pulse-to-Pulse Stability :

    <2% RMS/@30kHz
  • Average Power Stability :

    <5% RMS/8hr
  • Beam-Pointing Drift :

    <30μrad/℃
  • Polarization Ratio :

    >100:1
  • Polarization Orientation :

    Horizontal
  • Operating Temp. & RH :

    10℃ to 30℃ | <80%
  • Storage Temp. & RH) :

    -20℃ to 65℃ | <90 %
  • Electricity Requirement :

    100-240VAC |50/60Hz | Single phase
  • Power Consumption :

    <500W
  • Warranty :

    18months
  • Product Detail
  • Video

uv laser

High frequency repetitive marking is the advantage of RFH solid-state UV lasers

The unique function of self-cleaning in the inner cavity makes the RFH UV laser have a longer life and more stable

 

 

As long as lasers are mentioned, everyone may think of the same thing. It seems that all lasers have the same origin, but in fact they are different, including but not limited to CO2 lasers, red light, green light, and today's protagonist ultraviolet laser.

 

In the laser world, UV lasers are also known as "the all-rounder option". Other brothers have their own areas of expertise, but the UV laser is like the Jiuyin Sutra written by Jin Yong. It is an all-encompassing martial arts secrets.

 

The wavelength of the UV laser is mostly 355nm. Thanks to its characteristics, the spot focusing is extremely small, which can minimize the thermal influence, and the cutting or marking edge can be easily made smooth and burr-free.

 

It is under such advantages that UV lasers are often used for precision machining and have a wide range of applicability.

 

In addition to the small heat-affected range, another feature of the UV laser is that it can emerge suddenly and gradually become the mainstream precision machining in the era of Industry 4.0.

 

Under normal circumstances, ultraviolet lasers are called "cold light sources", and processing using them is also called "cold processing", because ultraviolet lasers can break the chemical bonds in the material or the surrounding medium, so that a non-thermal process occurs in the material. destroy.

 

Because it is a cold light source, there is no thermal effect, and the material is not easily deformed.

 

In practical cases, RFH laser can easily cut shells with high-power ultraviolet laser without deformation or burning, and the edges are smooth.

 

The material of shell is very fragile, and a slight error may fall short. Under the precise control of RFH laser, it is easy to achieve high yield.

 

In the past, the biggest problem with UV lasers was that the power was too low, and most lasers stayed within 10W. Today, high-power UV lasers above 10W are becoming more and more mature, with higher overall efficiency and more stable performance.

 

With the popularity of high-power ultraviolet lasers, across various fields, it will soon become an all-around player in the laser industry.

 

RFH Recommended: Expert III 355 High Power UV Pulsed Solid State Laser

 

The RFH Expert III 355 is very small in size and adopts an integrated design, which can be easily integrated with the equipment, and it does not need to enlarge the optical path, which saves costs.

 

In terms of performance, the laser wavelength of the RFH Expert III 355 is 354.7nm, the repetition frequency coverage is wide (single pulse to 200kHz), it has excellent beam quality (M2<1.2), and it is strictly guaranteed in all frequency ranges.

 

In terms of processing the heat-affected zone, on the one hand, the pulse width is <25ns@50k, the heat-affected zone is very small during processing, and on the other hand, it has perfect spot characteristics (spot ellipticity>90%).

 

RFH Expert III 355 adopts unique laser cavity design and acousto-optic Q-switching technology, which can be suitable for various laser application control needs.

 

In addition, an inner cavity self-purification system is also added to the design, which makes the laser have a long life and stable operation.

 

 

In actual use, the operation threshold and maintenance difficulty are also one of the problems that laser equipment urgently needs to solve. RFH laser solves this problem very well.

 

 

RFH Expert III 355 uses all-digital intelligent power control technology, which is easy to operate and easy to monitor. At the same time, it can communicate with the computer through the RS232 serial port, and control the laser externally, which is convenient for later operation and maintenance management.

 

After 15 years of ingenious forging, RFH Expert III 355 was born. As a global industrial-grade all-solid-state laser manufacturer, RFH has delivered satisfactory answers to customers.

 

To meet the market demand, RFH newly developed S9 series UV laser in 2020. Comparing with its kinds, S9 series UV laser features with rugged sealed cavity, extremely compact size, simple and robust, high stability, high efficiency, high reliability and excellent laser beam quality.Its compact design suggests no necessity in building big light path, which greatly reduces space and cost and makes it easy to be installed into UV laser marking machines. In addition, S9 series cavity structure is more stability and more excellent scalability, which means the same laser cavity can be produces multi-power lasers , and the stability of different power ranges is greatly improved.

UV LASER

 

S9 series uv laser characteristics:   

1. 355 nm output wavelength, Up to 200 Hz repetition rate; laser power ranging from 3w-10w; Continuous tuning of repetition rate while maintaining constant pulse energy, superior beam pointing and energy stability make the S9 the first choice for micromachining, marking and thin film removal applications 

 

2. Exceptional beam quality (M²<1.2) ,absolutely assured in all repetition rates; relatively short pulse width <12ns@30 with little heat transfer to surrounding material; perfect beam spot quality(Beam Circularity>90%) 

Close to Gaussian smooth beam profile with low value M² < 1.2 and good focusability are beneficial for applications such as  

 

3. Unique Q-switching technology, adapts a variety of control requirements of laser applications;Online refreshment for harmonic coupling technology;Excellent long term power stability Rugged sealed cavity, Extremely compact size, Simple and robust 

 

4. Digital control technology for the driver,  RS232 control interface ensures easy control and integration with laser marking equipment 

 

5. This laser adopts one - style design with compact and reasonable structure, easy installation. 

Easy to transport and saves space due to compact and light design 

 

Water cooling,cost-effective and reliable end-pumping technology and amplifier-free DPSS design guarantee easy operation and alignment simple installation and low maintenance costs

 

6. Industrial production process control technology,provides quality stable products.

S9 uv laser

S9 355nm UV LASER

 RFH - The leading industrial solid-state laser manufacturer

 

For over 13 years with excellent long term stability and exceptional good beam quality

 

Production in dust-free plant & rigorous quality control system

From purchasing, pre-production quality check, assembling, finished product testing, warehouse-in inspection, pre-delivery testing to after-sales service, each step is under control to make sure product quality and consistency in both machine parameters and actual running parameters. This is what makes RFH laser lasts longer than its peers. 

RFH LASER

 

Top professional team, independent R&D in laser oriented power supply control system

There is a one-to-one correspondence between power supply and laser. The stability of power supply control system determines if the laser can maximize its performance during operation. RFH Laser has independent R&D in power supply technique which enables timely update and improvement of power supply control system module based on the laser’s need. 12-year experience in R&D and a top professional team make RFH laser a reliable and stable laser system.

LASER POWER SUPPLY

 

Core components of oversea brands with guaranteed quality

Pumping, Q-switching and other core components adopt oversea brands. Work with top brand component suppliers of home and abroad. Each component is guaranteed with its quality from the beginning of materials purchasing. This is why users can trust RFH laser.  

5W uv laser

 

Power supply+laser head+cooling system sold in a group

Being client-oriented, RFH offers proposal of selling the whole laser system in a group so that the laser system can maximize its performance while maintaining its stability. 

uv  laser

 

Full-digital display, supporting communication with computer, capable of laser’s remote control

Each laser developed and produced by RFH can always remain high quality in industrial and extreme conditions of scientific research. With stable beam quality, high efficiency, best cost performance and high reliability, RFH has earned good reputation in different industries at home and abroad. After 12-year development, RFH has become a reputed brand in nanosecond laser industry. 

uv laser | green laser | Ultraviolet lasers | uv dpss laser | nanosecond laser | UV laser source | Solid State Lasers

UV LASER

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related products
K-6 Integrated UV Laser 4W-6W
K-6 Integrated UV Laser 4W-6W-8W
K-6 series UV DPSS laser, developed and produced by RFH, covers 4W/6W/8W in laser power with short pulse width (<20ns@30K) ,superior beam quality (M²<1.2) and perfect laser spot quality (beam circularity >90%). K-6 series laser is ideal for high-end ultra-precise processing as well as marking in mobile phone shell , package of cosmetics, food, medicine and other high polymer materials, PCB, LCD, glassware surface, metal’s cladding material, plastic keypad, electronic component, gift, communication device, construction material and other areas.
Download datasheet
K-6 Integrated UV Laser 4W-6W
Why RFH UV laser is often used in laser marking plastic button switch?
Why RFH UV laser is often used in laser marking plastic button switch
Why RFH UV laser is often used in laser marking plastic button switch? More and more manufacturers choose UV laser marking machine to create pattern and characters on the plastic button switch. The focal spot of UV laser is pretty small with little heat transfer to surrounding material, so UV laser is also called “cold light source”. Because of this feature, heat effect won’t occur. Thus, distorting or burning of materials is no longer an issue.    Professional UV laser manufacturer - Shenzhen RFH Laser Technology Co.,Ltd    With 13 years of experience, the S9 series nanosecond UV laser developed and produced by RFH can engrave clear characters on the keyboard and the mouse. These kinds of characters can not only help people identify different buttons in the dark but also last long, for there are slightly protruding part on the buttons. This improves the durability and practicability of the keyboard and the mouse.   
Why RFH UV laser is often used in laser marking plastic button switch?
UV laser
UV laser featuring cold processing for marking plastic button on keyboard
 UV laser featuring cold processing for marking plastic button on keyboard More and more manufacturers choose UV laser marking machine to create pattern and characters on the plastic button switch. The focal spot of UV laser is pretty small with little heat transfer to surrounding material, so UV laser is also called “cold light source”. Because of this feature, heat effect won’t occur. Thus, distorting or burning of materials is no longer an issue.    Professional UV laser manufacturer - Shenzhen RFH Laser Technology Co.,Ltd    With 13 years of experience, the S9 series nanosecond UV laser developed and produced by RFH can engrave clear characters on the keyboard and the mouse. These kinds of characters can not only help people identify different buttons in the dark but also last long, for there are slightly protruding part on the buttons. This improves the durability and practicability of the keyboard and the mouse.   
UV laser
355nm UV laser
How can 355nm UV lasers be used in industrial production?
How can 355nm UV lasers be used in industrial production?   In modern industrial production, laser is an indispensable part. As the requirements for processing accuracy become more and more detailed, lasers are deeply involved in industrial links such as marking and cutting.
355nm UV laser
Laser engraving glass
Laser engraving glass, green laser or UV laser, which is better
Laser engraving glass, green laser or UV laser, which is better   At present, green lasers are widely used in the production of marking and engraving beer glasses, so many manufacturers have accelerated the promotion of production lines, and in fact, RFH UV lasers can also mark on glass.
Laser engraving glass
cuts diamonds
RFH 3W 5W 10W UV laser cuts diamonds, smooth without bursting
RFH 3W 5W 10W UV laser  cuts diamonds, smooth without bursting   Diamonds are one of the most high-end luxury goods. They are not only bright and look very bright, but also are one of the hardest substances in the world and have a very high collection value.
cuts diamonds
Marking Plastics
RFH 355nm UV Laser Cold Light Source Marking Plastics, No Carbonization, No Burning
RFH 355nm UV Laser Cold Light Source Marking Plastics, No Carbonization, No Burning   In the surface marking of plastics, there are always problems such as material being scorched, but the research and development of RFH 355nm UV laser has completely solved this problem, allowing more small and medium-sized growth enterprises whose main business is plastic marking to survive and room for development.
Marking Plastics
marking plastic auto parts
UV nanosecond laser marking plastic auto parts, accompany you to travel safely
UV nanosecond laser marking plastic auto parts, accompany you to travel safely   The development of automobiles has greatly facilitated human life, and the research and development of new energy vehicles has combined greenness and convenience. Plastic auto parts occupy an important position in the development and installation of automobiles, but the complex shape and a large number of demands make the marking of characters more complicated, and the RFH UV nanosecond laser can solve this problem very well.
marking plastic auto parts
Get the latest offers Subscribe for our newsletter

Please read on, stay posted, subscribe, and we welcome you to tell us what you think.

Leave A Message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

About

contact