The cutting of RFH green laser adopts non-contact cutting, and the cutting is completed by moving the high-energy light spot on the glass surface. It is worth mentioning that although the energy of the RFH green laser beam is extremely high, since the thermal effect is zero, it will not cause damage to other parts, allowing the glass cutting process to reach a balance.

Through the introduction of a friend, I learned that the RFH S9-532 green laser is very effective in marking glass, so I ordered one from us to go back and try the effect. After using our laser, Mr. Chen said that they The workers in the factory have a small heat-affected zone during processing, which is very suitable for their laser application needs, and there will be no burning or deformation.

    Glass internal carving by 10w nanosecond uv pulsed laser   S9-Y series solid state pulsed UV laser is ultra compact. The whole part of power supply is integrated into the laser head. This makes the size of the laser more smaller, and the integration into a system more easier and convenient. S9-Y series is of short pulse width(<12ns@30k)，superior beam quality(M²<1.2) and perfect laser sport quality(beam circularity>90%).

The RFH green laser emits ultra-high-energy laser beams to scratch the glass surface. During the process, the glass surface will not be broken due to the sudden impact of the laser beam. The reason is that the thermal effect of the UV laser radiation engraving is basically zero.

5w 10w green laser for 3d glass etching   S9 series green DPSS laser, developed and produced by RFH, covers 5w/10w in laser power with short pulse width (<14ns@30K) ,superior beam quality (M²<1.2) and perfect laser spot quality (beam circularity >90%). It is particularly suitable for drilling and scribing in ceramics, marking, cutting and drilling in glass & wafer and surface treatment in most of the metal and non-metal materials. 

3w 5w uv laser for marking/engraving the back side of glass substrates 355 nm output wavelength, Up to 200 Hz repetition rate; laser power ranging from 3w-10w; Continuous tuning of repetition rate while maintaining constant pulse energy, superior beam pointing and energy stability make the S9 the first choice for micromachining, marking and thin film removal applications   

Laser processing on glass Marking and Laser Engraving on Glass Glass is a complex material to be processed due to its characteristics of fragility and poor heat transfer. Over the years these challenges have been faced and solved using specific laser technologies, suitable for this difficult task.

3w 5w uv laser source engraving “marking” of select coated and uncoated glass Laser etched graphics, icons and unique identifiers (QR codes and barcodes) These two methods of laser engraving and etching add to the company’s Total Solution approach of single-point accountability for fabricated specialty glass components.

As a leading laser technology company in the south, RFH green laser has noticed the outstanding characteristics of liquid crystal substrate glass a few years ago, and entered into the interior of many enterprises to help them mark, engrave and cut liquid crystal glass substrates, etc. side operation.

RFH 5watt ultraviolet laser marking glass lens To meet the market demand, RFH newly developed S9 series UV laser . Comparing with its kinds, S9 series UV laser features with rugged sealed cavity, extremely compact size, simple and robust, high stability, high efficiency, high reliability and excellent laser beam quality.Its compact design suggests no necessity in building big light path, which greatly reduces space and cost and makes it easy to be installed into UV laser marking machines. In addition, S9 series cavity structure is more stability and more excellent scalability, which means the same laser cavity can be produces multi-power lasers , and the stability of different power ranges is greatly improved

3d subsurface laser engraving glass with high power uv laser Expert III 355 series UV DPSS laser, developed and produced by RFH, covers 10w-15w in laser power with short pulse width (<20ns@40K) ,superior beam quality (M²<1.2) and perfect laser spot quality (beam circularity >90%). It is widely used in PE/PCB/FPC cutting, glass & sapphire cutting, drilling, scribing & cutting used in high precision micromaching areas.

15watt high power uv laser etching,marking white on glass   Expert III 355 series UV DPSS laser, developed and produced by RFH, covers 10w-15w in laser power with short pulse width (<20ns@40K) ,superior beam quality (M²<1.2) and perfect laser spot quality (beam circularity >90%). It is widely used in PE/PCB/FPC cutting, glass & sapphire cutting, drilling, scribing & cutting used in high precision micromaching areas.