-
Application of UV laser beam source in marking machine
Jun 22 , 2022
Application of UV laser beam source in marking machine Glass is formed by the fusion of silica and other chemicals (mainly produced from: soda ash, limestone, quartz). A silicate-based non-metallic material that forms a continuous network structure during melting, and gradually increases in viscosity and hardens during cooling, causing it to crystallize. As a synthetic material, it exudes a...
view more
-
Glassware Laser Engraving 3w, 5w and 10w UV laser source
Jun 22 , 2022
Glassware Laser Engraving 3w, 5w and 10w UV laser source Glass has good internal structure stability, high mechanical and chemical properties, low expansion coefficient, can withstand high temperature differences, good flame processing performance and good transparency, and can be used in a variety of ways as required Products made into various shapes. As an ancient material, glass c...
view more
-
Is it better to use 3 Watt 355 laser uv or CO2 laser for glass marking?
Jun 22 , 2022
Is it better to use 3 Watt 355 laser uv or CO2 laser for glass marking? RFH Laser has 15 years of experience in R&D and production of laser equipment. It is used for glass marking and engraving machines. If the marking effect and marking accuracy are high, it is recommended to use UV laser marking machines. The effect produced by UV is smooth and non-grainy to the touch, and the glass s...
view more
-
Application research of 5 Watt 355 laser source marking on QR code below 1x1mm
Jun 22 , 2022
Application research of 5 Watt 355 laser source marking on QR code below 1x1mm As a modern precision machining method, laser marking technology has unparalleled advantages compared with traditional machining methods such as corrosion erosion, electrical discharge machining, mechanical scribing, and printing. The demand for precision marking in industrial manufacturing has seen positi...
view more
-
Will 3w 5w uv laser diode replace CO2 laser marking?
Jun 22 , 2022
Will 3w 5w uv laser diode replace CO2 laser marking? In the rapidly developing laser industry, the status of CO2 laser technology has gradually declined in recent years. Born in 1964, it can be said to be an "old" laser technology. In the decades-long history of laser applications, CO2 lasers have been the main force for a long time, whether in manufacturing, medical, or scientific research...
view more
-
Can both uv pulsed laser 20w and carbon dioxide laser marking machine mark glass?
Jun 23 , 2022
Can both uv pulsed laser 20w and carbon dioxide laser marking machine mark glass? The laser marking machine has the effect that the traditional method cannot achieve. In the glass products that are already fragile in electronic products, a product with high requirements, the marking of a product has a very important impact on the image of the product, and even has a major impact on the qual...
view more
-
What should I do if the 355nm laser uv laser is weak and the marking is uneven?
Jun 23 , 2022
What should I do if the 355nm laser uv laser is weak and the marking is uneven? After the UV laser marking machine has been used for some years, there have been various small faults, such as: the laser does not emit light or the light output is weak, marking. uneven graphics, power drop, polarized light, etc. So why does such a problem occur? When these problems occur, how should we investi...
view more
-
What are the advantages of uv laser 355 nm source and fiber laser marking machine?
Jun 23 , 2022
What are the advantages of uv laser 355 nm source and fiber laser marking machine? In the field of laser marking machines, UV laser marking machines and fiber laser marking machines are the most used. What are the advantages of the two laser marking machines? Today, Bot Laser will give you a brief introduction: In terms of wavelength, UV lasers have shorter wavelengths than visible l...
view more
-
Can the 355 nm Ultraviolet Laser head perform deep engraving on glass?
Jun 23 , 2022
Can the 355 nm Ultraviolet Laser head perform deep engraving on glass? Ultraviolet laser marking machine can carry out deep engraving of glass. Ultraviolet laser adopts cold light technology, so there is no damage to glass. It can engrave LOGO trademark, text, two-dimensional code, pattern, serial number, serial number, symbol, garbled number on glass products, and it has fast engraving spe...
view more
-
Remote Control Button Laser Marking—Application of UV Solid State Lasers
Jun 23 , 2022
Remote Control Button Laser Marking—Application of UV Solid State Lasers A remote control is a device used to remotely control machinery. Modern remote controls are mainly composed of integrated circuit boards and buttons used to generate different messages. Now, the remote control has been applied to all aspects of our lives. There are remote controls on TVs, air conditioners ...
view more
-
Why is Uv 3d laser machine more expensive than fiber laser marking machine?
Jun 24 , 2022
Why is Uv 3d laser machine more expensive than fiber laser marking machine? Why is the UV laser marking machine more expensive than the fiber laser marking machine? In some special materials, the UV laser marking machine is better than the optical fiber, such as ABS, PP, UV, etc. The main reason is that UV waves are different from fiber optic waves. Ultraviolet light has a wavelength of 355...
view more
-
5 Watt uv laser source for lettering on glass crystal surface
Jun 24 , 2022
5 Watt uv laser source for lettering on glass crystal surface Glass is a kind of high-density material, which is widely used in our daily life, such as cooking seasonings, drinks, water glasses, all of which are used in glass. To engrave on these glass daily necessities, what laser marking machine is needed? Woolen cloth? Glass Laser Engraving Laser marking machine is the most...
view more
