-
Is it better to use 3 Watt 355 laser uv or CO2 laser for glass marking?
Jun 22 , 2022
Is it better to use 3 Watt 355 laser uv or CO2 laser for glass marking? RFH Laser has 15 years of experience in R&D and production of laser equipment. It is used for glass marking and engraving machines. If the marking effect and marking accuracy are high, it is recommended to use UV laser marking machines. The effect produced by UV is smooth and non-grainy to the touch, and the glass s...
view more
-
Application research of 5 Watt 355 laser source marking on QR code below 1x1mm
Jun 22 , 2022
Application research of 5 Watt 355 laser source marking on QR code below 1x1mm As a modern precision machining method, laser marking technology has unparalleled advantages compared with traditional machining methods such as corrosion erosion, electrical discharge machining, mechanical scribing, and printing. The demand for precision marking in industrial manufacturing has seen positi...
view more
-
Will 3w 5w uv laser diode replace CO2 laser marking?
Jun 22 , 2022
Will 3w 5w uv laser diode replace CO2 laser marking? In the rapidly developing laser industry, the status of CO2 laser technology has gradually declined in recent years. Born in 1964, it can be said to be an "old" laser technology. In the decades-long history of laser applications, CO2 lasers have been the main force for a long time, whether in manufacturing, medical, or scientific research...
view more
-
Does the high power uv laser source need to be used with a chiller?
Jun 23 , 2022
Does the high power uv laser source need to be used with a chiller? During the production process of the UV laser marking machine, the equipment generates a lot of heat, which causes the equipment to fail to operate normally. The function of the chiller is to provide a high and constant liquid temperature to ensure the safe operation of the mother machine. The working principle of the chill...
view more
-
Can both uv pulsed laser 20w and carbon dioxide laser marking machine mark glass?
Jun 23 , 2022
Can both uv pulsed laser 20w and carbon dioxide laser marking machine mark glass? The laser marking machine has the effect that the traditional method cannot achieve. In the glass products that are already fragile in electronic products, a product with high requirements, the marking of a product has a very important impact on the image of the product, and even has a major impact on the qual...
view more
-
What should I do if the 355nm laser uv laser is weak and the marking is uneven?
Jun 23 , 2022
What should I do if the 355nm laser uv laser is weak and the marking is uneven? After the UV laser marking machine has been used for some years, there have been various small faults, such as: the laser does not emit light or the light output is weak, marking. uneven graphics, power drop, polarized light, etc. So why does such a problem occur? When these problems occur, how should we investi...
view more
-
What are the advantages of uv laser 355 nm source and fiber laser marking machine?
Jun 23 , 2022
What are the advantages of uv laser 355 nm source and fiber laser marking machine? In the field of laser marking machines, UV laser marking machines and fiber laser marking machines are the most used. What are the advantages of the two laser marking machines? Today, Bot Laser will give you a brief introduction: In terms of wavelength, UV lasers have shorter wavelengths than visible l...
view more
-
Why is high power uv laser so expensive?
Jun 23 , 2022
Why is high power uv laser so expensive? The fiber laser printers and carbon dioxide laser printers on the market are cheap, have a long service life, are easy to maintain, and have low environmental requirements. So why are UV laser printers so expensive? In contrast, shorter service life and more careful maintenance? Today's RFH laser editor will introduce to you the reasons for the high ...
view more
-
Remote Control Button Laser Marking—Application of UV Solid State Lasers
Jun 23 , 2022
Remote Control Button Laser Marking—Application of UV Solid State Lasers A remote control is a device used to remotely control machinery. Modern remote controls are mainly composed of integrated circuit boards and buttons used to generate different messages. Now, the remote control has been applied to all aspects of our lives. There are remote controls on TVs, air conditioners ...
view more
-
Why is Uv 3d laser machine more expensive than fiber laser marking machine?
Jun 24 , 2022
Why is Uv 3d laser machine more expensive than fiber laser marking machine? Why is the UV laser marking machine more expensive than the fiber laser marking machine? In some special materials, the UV laser marking machine is better than the optical fiber, such as ABS, PP, UV, etc. The main reason is that UV waves are different from fiber optic waves. Ultraviolet light has a wavelength of 355...
view more
-
High-Power 355 nm Ultraviolet Laser is a powerful assistant in the field of precision machining
Jun 24 , 2022
High-Power 355 nm Ultraviolet Laser is a powerful assistant in the field of precision machining In recent years, with the rapid development of laser technology, the application of laser technology in different fields has been gradually expanded, and it is widely used in many aspects of current processing. In the context of the continuous deepening of "Made in China 2025", today, the ...
view more
-
Application of High power UV laser source marking on plastic
Jun 24 , 2022
Application of High power UV laser source marking on plastic If the two scanning galvanometers are mounted at a 90-degree angle to each other, then a UV laser marking machine can mark both sides of the workpiece. The transition time of the laser beam moving from one scanning galvo to the other is about 50ms. UV laser marking machine: discoloration Marking on plastic electrical switch...
view more
