-
What factors affect the engraving on glass with the Ultraviolett (UV) Laser 355 nm
Jun 21 , 2022
What factors affect the engraving on glass with the Ultraviolett (UV) Laser 355 nm UV laser marking on flat glass is directly related to the peak power of the laser, the size of the focused spot, and the speed of the galvanometer. We have found that sometimes the light from high power lasers does not etch the glass surface, but passes directly through. This is because the peak power ...
view more
-
Glassware Laser Engraving 3w, 5w and 10w UV laser source
Jun 22 , 2022
Glassware Laser Engraving 3w, 5w and 10w UV laser source Glass has good internal structure stability, high mechanical and chemical properties, low expansion coefficient, can withstand high temperature differences, good flame processing performance and good transparency, and can be used in a variety of ways as required Products made into various shapes. As an ancient material, glass c...
view more
-
Application research of 5 Watt 355 laser source marking on QR code below 1x1mm
Jun 22 , 2022
Application research of 5 Watt 355 laser source marking on QR code below 1x1mm As a modern precision machining method, laser marking technology has unparalleled advantages compared with traditional machining methods such as corrosion erosion, electrical discharge machining, mechanical scribing, and printing. The demand for precision marking in industrial manufacturing has seen positi...
view more
-
How to solve the shallow depth of 355nm UV laser source laser engraving
Jun 22 , 2022
How to solve the shallow depth of 355nm UV laser source laser engraving When the UV laser marking machine is in use, the problem of weak laser light and shallow laser engraving depth often occurs. This problem is generally caused by improper operation. 1. Check whether the laser of the UV laser marking machine deviates from the center point after entering the galvanometer. The optica...
view more
-
nanosecond laser source targets ultra-fine processing
Jun 23 , 2022
nanosecond laser source targets ultra-fine processing In recent years, with the rapid development of laser technology, the application of laser technology in different fields has been gradually expanded, and it is widely used in many aspects of current processing. more possibilities. Now the application of laser technology emerges one after another, and various new applications conti...
view more
-
Can the 355 nm Ultraviolet Laser head perform deep engraving on glass?
Jun 23 , 2022
Can the 355 nm Ultraviolet Laser head perform deep engraving on glass? Ultraviolet laser marking machine can carry out deep engraving of glass. Ultraviolet laser adopts cold light technology, so there is no damage to glass. It can engrave LOGO trademark, text, two-dimensional code, pattern, serial number, serial number, symbol, garbled number on glass products, and it has fast engraving spe...
view more
-
Remote Control Button Laser Marking—Application of UV Solid State Lasers
Jun 23 , 2022
Remote Control Button Laser Marking—Application of UV Solid State Lasers A remote control is a device used to remotely control machinery. Modern remote controls are mainly composed of integrated circuit boards and buttons used to generate different messages. Now, the remote control has been applied to all aspects of our lives. There are remote controls on TVs, air conditioners ...
view more
-
5 Watt uv laser source for lettering on glass crystal surface
Jun 24 , 2022
5 Watt uv laser source for lettering on glass crystal surface Glass is a kind of high-density material, which is widely used in our daily life, such as cooking seasonings, drinks, water glasses, all of which are used in glass. To engrave on these glass daily necessities, what laser marking machine is needed? Woolen cloth? Glass Laser Engraving Laser marking machine is the most...
view more
-
Application of High power UV laser source marking on plastic
Jun 24 , 2022
Application of High power UV laser source marking on plastic If the two scanning galvanometers are mounted at a 90-degree angle to each other, then a UV laser marking machine can mark both sides of the workpiece. The transition time of the laser beam moving from one scanning galvo to the other is about 50ms. UV laser marking machine: discoloration Marking on plastic electrical switch...
view more
-
Can 355nm Nanosecond Solid State Lasers mark metal? How to choose a laser marking machine model?
Jun 24 , 2022
Can 355nm Nanosecond Solid State Lasers mark metal? How to choose a laser marking machine model? Can UV marking machine mark metal? Ultraviolet laser marking machine combines the characteristics of ultraviolet light, and is mostly used for non-metallic products; Because the ultraviolet laser has a very small focus spot, and the processing has almost no thermal influence, it is called...
view more
-
The difference between Nanosecond Lasers cooled source and PCB dedicated CO2 laser equipment
Jun 27 , 2022
The difference between Nanosecond Lasers cooled source and PCB dedicated CO2 laser equipment The 2020 South China Advanced Laser and Processing Application Technology Exhibition will be held at the Shenzhen International Convention and Exhibition Center (Bao'an New Hall) from November 3 to 5. Under the premise of covering the core resources of the entire industrial chain of electronic intel...
view more
-
Why is 355nm UV Ultraviolet laser not suitable for engraving metal?
Jun 27 , 2022
Why is 355nm UV Ultraviolet laser not suitable for engraving metal? Why is the UV laser marking machine not suitable for engraving metal? At present, the widely used laser marking machine models on the market include fiber laser marking machine, ultraviolet laser marking machine, and CO2 laser marking machine. These three types of models can cover almost all kinds of product marking ...
view more
