-
infrared laser cutting metal
Jun 17 , 2022
infrared laser cutting metal Customer review Everything arrived ok, package was not be damaged, laser is working as well, infrared laser cutting metal. The quality of the machine is very good, I will buy the more laser machine from RFH Laser company. uv laser | green laser | Ultraviolet lasers | uv dpss laser | nanosecond laser | UV l...
view more
-
355 nm Ultraviolet Laser cutting abs with no burnt
Jun 17 , 2022
355 nm Ultraviolet Laser cutting abs with no burnt Customer review just what I wanted. Can't believe how fast it arrived and everything works perfectly. AAA+++ The best service yet on this portal all is okey , fast shipping and good machine.355 nm Ultraviolet Laser cutting abs with no burnt. Highly recommend uv laser | green laser | Ultraviolet lasers | ...
view more
-
high power solid state laser printed circuit board
Jun 17 , 2022
high power solid state laser printed circuit board Customer review The high power laser seems to work well and surprised me a little because it arrived in focus. the good: very well packaged. time was what was expected (slow but I was warned, pandemic and all). easy to communicate with supplier, they respond quickly. high power solid state laser printed circuit board so far it ...
view more
-
355nm UV nanosecond laser source for acrylic cutting and engraving
Jul 05 , 2022
355nm UV nanosecond laser source for acrylic cutting and engraving Acrylic, chemical name is polymethyl methacrylate, also known as plexiglass, due to its very high light transmittance (>92%), crystal-like transparency + half the density of glass, not brittle, and easy to dye, Easy to process and other advantages, it is often cut or carved into various shapes for different purposes such ...
view more
-
How laser uv 355 nm cutting achieves high-quality flexible circuit boards
Jul 07 , 2022
How laser uv 355 nm cutting achieves high-quality flexible circuit boards For FPC, the polyimide protective film functions the same as the solder mask for FR4-based printed circuit boards (PCBs). Polyimide is typically 12-25µm thick, coated with a pressure-sensitive adhesive, and attached to a paper-based material. The key challenge is to ablate patterns at high speed in polyimide whi...
view more
-
The effect of using two-dimensional code uv laser marking laser on PCB circuit board
Jul 14 , 2022
The effect of using two-dimensional code uv laser marking laser on PCB circuit board Compared with the inkjet method, the RFH PCB laser marking technology is more environmentally friendly and economical, the permanent mark will not be easily erased, the non-contact non-destructive marking will not damage the substrate, the processing accuracy is high, and small format can be achieved 0.12x0...
view more
-
355nm UV laser cutting ceramic circuit boards: the pursuit of higher precision
Jul 20 , 2022
355nm UV laser cutting ceramic circuit boards: the pursuit of higher precision With excellent thermal performance and high stability, ceramic circuit boards are ideal for extreme conditions and are widely used in various application scenarios such as automotive, aerospace, 3C consumer electronics, communications, and medical. A coin always has two sides, and so do ceramic circuit boa...
view more
-
Application of 355nm UV Laser in Cutting BOPP Film
Jul 21 , 2022
Application of 355nm UV Laser in Cutting BOPP Film BOPP film, that is, biaxially oriented polypropylene film, is a very important soft packaging material and is widely used. The common outer film of toothpaste packaging boxes and medicine packaging boxes is BOPP film. It has the advantages of light and soft, non-toxic, odorless, moisture-proof, high mechanical strength, good dimensional sta...
view more
-
RFH 355nm UV Nanosecond Laser for Acrylic Cutting and Engraving
Jul 22 , 2022
RFH 355nm UV Nanosecond Laser for Acrylic Cutting and Engraving Acrylic, chemical name is polymethyl methacrylate, also known as plexiglass, due to its very high light transmittance (>92%), crystal-like transparency + half the density of glass, not brittle, and easy to dye, Easy to process and other advantages, it is often cut or carved into various shapes for different purposes such as ...
view more
-
Fine cutting of wearable device circuit boards, RFH 355nm UV laser is enough
Jul 25 , 2022
Fine cutting of wearable device circuit boards, RFH 355nm UV laser is enough Wearable device is a portable device that is directly worn on the human body or integrated into clothes, glasses and other carriers. It is not only hardware, but also can achieve more powerful functions through software, network, and cloud interaction. Bracelets, smart glasses and other forms appear. With th...
view more
-
The effect is awesome! Application of RFH Industrial Nanosecond Solid State Laser in Copper Foil Cutting
Jul 25 , 2022
The effect is awesome! Application of RFH Industrial Nanosecond Solid State Laser in Copper Foil Cutting Metal foil is a thin metal sheet extended from metal, and various types of ultra-thin metal foil have different and important applications in various industries. For example, steel and alloy foils are mainly used in electronics and aerospace, titanium alloy foils can be used to make deco...
view more
-
Application of industrial nanosecond solid-state laser in buffer material cutting
Jul 25 , 2022
Application of industrial nanosecond solid-state laser in buffer material cutting The mature production process is often inseparable from product packaging and packaging. In order to avoid product damage and destruction due to bumps and falls during transportation, manufacturers need to match the product appearance in the packaging process. Buffer materials. Benefiting from the characterist...
view more
