-
What are the advantages of uv laser 355 nm source and fiber laser marking machine?
Jun 23 , 2022
What are the advantages of uv laser 355 nm source and fiber laser marking machine? In the field of laser marking machines, UV laser marking machines and fiber laser marking machines are the most used. What are the advantages of the two laser marking machines? Today, Bot Laser will give you a brief introduction: In terms of wavelength, UV lasers have shorter wavelengths than visible l...
view more
-
What should I do if the 355nm laser uv laser is weak and the marking is uneven?
Jun 23 , 2022
What should I do if the 355nm laser uv laser is weak and the marking is uneven? After the UV laser marking machine has been used for some years, there have been various small faults, such as: the laser does not emit light or the light output is weak, marking. uneven graphics, power drop, polarized light, etc. So why does such a problem occur? When these problems occur, how should we investi...
view more
-
Application of ultraviolet laser diode source
Jun 23 , 2022
Application of ultraviolet laser diode source Glass is formed by the fusion of silica and other chemicals (mainly produced from: soda ash, limestone, quartz). A silicate-based non-metallic material that forms a continuous network structure during melting, and gradually increases in viscosity and hardens during cooling, causing it to crystallize. As a synthetic material, it exudes a quiet an...
view more
-
Does the high power uv laser source need to be used with a chiller?
Jun 23 , 2022
Does the high power uv laser source need to be used with a chiller? During the production process of the UV laser marking machine, the equipment generates a lot of heat, which causes the equipment to fail to operate normally. The function of the chiller is to provide a high and constant liquid temperature to ensure the safe operation of the mother machine. The working principle of the chill...
view more
-
How to solve the shallow depth of 355nm UV laser source laser engraving
Jun 22 , 2022
How to solve the shallow depth of 355nm UV laser source laser engraving When the UV laser marking machine is in use, the problem of weak laser light and shallow laser engraving depth often occurs. This problem is generally caused by improper operation. 1. Check whether the laser of the UV laser marking machine deviates from the center point after entering the galvanometer. The optica...
view more
-
Application research of 5 Watt 355 laser source marking on QR code below 1x1mm
Jun 22 , 2022
Application research of 5 Watt 355 laser source marking on QR code below 1x1mm As a modern precision machining method, laser marking technology has unparalleled advantages compared with traditional machining methods such as corrosion erosion, electrical discharge machining, mechanical scribing, and printing. The demand for precision marking in industrial manufacturing has seen positi...
view more
-
Characteristics of high frequency pulsing solid state laser and its application in FPC and PI film
Jun 22 , 2022
Characteristics of high frequency pulsing solid state laser and its application in FPC and PI film Characteristics of UV laser marking machine and its application in FPC and PI film FPC is an important connection line in the field of electronic applications and an indispensable part of electronic circuits. CVL cover film is a partner of FPC, and it can effectively exert anti-oxidatio...
view more
-
Glassware Laser Engraving 3w, 5w and 10w UV laser source
Jun 22 , 2022
Glassware Laser Engraving 3w, 5w and 10w UV laser source Glass has good internal structure stability, high mechanical and chemical properties, low expansion coefficient, can withstand high temperature differences, good flame processing performance and good transparency, and can be used in a variety of ways as required Products made into various shapes. As an ancient material, glass c...
view more
-
Application of 355nm ultraviolet laser light in glass products
Jun 21 , 2022
Application of 355nm ultraviolet laser light in glass products Glass is a widely used material in our daily necessities, and it is used in many places, from small household mirrors to large spacecraft. Glass is a silicate non-metallic material that crystallizes from raw materials such as soda ash, limestone, and quartz by dissolving. Although this artificially made glass is beautiful, it al...
view more
-
What factors affect the engraving on glass with the Ultraviolett (UV) Laser 355 nm
Jun 21 , 2022
What factors affect the engraving on glass with the Ultraviolett (UV) Laser 355 nm UV laser marking on flat glass is directly related to the peak power of the laser, the size of the focused spot, and the speed of the galvanometer. We have found that sometimes the light from high power lasers does not etch the glass surface, but passes directly through. This is because the peak power ...
view more
