-
355nm 3W UV Laser for Stereolithography 3D Printing
Jun 07 , 2023
355nm 3W UV Laser for Stereolithography 3D Printing 1. Product Description The laser generates 355nm UV laser with average output power ＞3W@30KHz; Client can choose laser crystal YVO4 or YAG according to actual need to meet final tech requirements; The laser is filtered twice inside laser resonator, besides client can opt intracavity primary beam expanding, lowering damage possibility of brewster ...
view more
-
1064nm Infrared laser Vs 355nm UV Laser,What is the Difference
Jun 09 , 2023
Nowadays,with the rapid development of laser technology,Laser marking machines with air-cooled have been widely used in many applications from auto parts to medical industry etc.These process of marking have significantly increased our production efficiency.Compared to other lasers technology,and among them, infrared lasers and ultraviolet lasers are the two type of lasers most widely used.They ha...
view more
-
355nm UV Laser source Application Samples
Jun 09 , 2023
Ultraviolet (UV) lasers offer extremely high photon energy. It can be applied to a wide range of applications. JPT’s Lark and Seal series laser sources produce high efficient UV laser for high speed processing. Let’s have a look at JPT’s UV laser application samples. UV Laser Sample Application - Plastic Marking UV laser is a better choice for 3C Marking indus...
view more
-
UV laser-ablated Cu superwetting surface with improved anti-icing and antibacterial properties
Jun 09 , 2023
UV laser-ablated Cu superwetting surface with improved anti-icing and antibacterial properties Ultraviolet laser-ablated technique was used to improve the anti-icing and antibacterial properties of copper (Cu) with the objective of achieving efficient heat exchange performance. The laser scanning space interval exhibited a critical influence on the surface topography. SEM obs...
view more
-
Water cooled 355nm UV Laser Micromachining-IPG Photonics Corporation
Jun 12 , 2023
The IX-255 UV laser micromachining system from IPG Photonics Corp. is a configurable multifunctional system with a beam energy density up to 25 J/cm2 for applications such as drilling and cutting ceramics, patterning of microfluidic devices and machining of low-taper-angle holes in polymers.The fully interlocked, Class 1 workstation is built on a granite base and support structure for vibrati...
view more
-
What is Quark UV-Laser
Jun 12 , 2023
UV-Laser UV-Laser features Compact-sized laser unit Low cost Available product design:laser unit, optical laser system LD solid-state laser specifications LLO Polyimide Damage Supported by JKA and its promotion funds from KEIRINRACE Application Laser debonding Laser lift-off (LLO) ITO Removal Micro via hole drilling Polyimide cutting and drilling Analysis / spectroscopy UV-Laser Line...
view more
-
What is UV Laser
Jun 13 , 2023
UV Laser UV lasers are in the range of "cold lasers" that is a practical solution for marking on a variety of materials such as plastics and glass that provides a clean and clear mark with high contrast. Since they emit less energy, they are a great solution for many organic and soft products as they are less likely to burn the materials. UV lasers are good for marking and engraving on all plastic...
view more
-
Nanosecond laser diode-pumped solid state lasers-PhotonTec Berlin GmbH
Jun 16 , 2023
Nanosecond laser diode-pumped solid state lasers-PhotonTec Berlin GmbH CHARACTERISTICS Operational mode nanosecond Technology solid-state Spectrum infrared, ultraviolet, green Applications industrial, cutting, for materials processing, drilling, for marking Other characteristics diode-pumped Wavelength 355 nm, 532 nm, 1,064 nm DESCRIPTION The diode-pumped solid state lasers are designed for rigour...
view more
-
Nanosecond solid-state UV Diode-pumped laser THEIA
Jun 16 , 2023
Nanosecond solid-state UV Diode-pumped laser THEIA Thanks to our expertise in high energy lasers, we are now proud to introduce THEIA. THEIA is the most energetic laser in its repetition rate range delivering nanosecond pulses at different wavelengths in the near infrared (1064 nm), in the visible (532 nm) and in the near ultraviolet (355 nm). THEIA can provide significant improvements in th...
view more
-
Lumentum high-power Q-switched diode-pumped UV and green lasers
Jun 21 , 2023
Lumentum Q Series lasers lead the market for high-power Q-switched diode-pumped UV and green lasers used for a wide variety of high-precision, micromachining applications. Whether for high-pulse-energy processing of materials such as ceramics, high-repetition-rate processing of materials such as sapphire or silicon, or patterning thin-film solar cells, the Q Series lasers deliver unsurpassed perfo...
view more
-
The Cobolt Zouk ™ 355nm is continuous wave diode-pumped solid state UV DPSS laser
Jun 21 , 2023
The Cobolt Zouk ™ 355nm is continuous wave diode-pumped solid state laser. It is made of a single frequency laser with <1 MHz spectral bandwith. It is in accordance with PPKTP technology that gives better power efficiency, huge wavelength flexibility and multi-line emission possibility. Its a small UV DPSS laser with an output power of 10 & 20mW at 355nm. It provides a low noise level...
view more
-
WaveTopSign INNO 355nm UV Laser Source Air Cooled for 3D Printing
Jun 24 , 2023
WaveTopSign INNO 355nm UV Laser Source Air Cooled for 3D Printing FOTIA Series Compact Medium and Low Power Lasers: 1. Outstanding price-performance ratio 2. UV average power up to 10 W 3. Excellent spot quality M²<1.2 4. Software system operation, convenient and quick 5. Stable and reliable, meeting 7/24 industrial production conditions Introduction: Compact medium and low power nanosecon...
view more
