-
What is the difference between Galvo Fiber and UV Lasers
Jun 03 , 2023
What is the difference between Galvo Fiber and UV Lasers Galvo fiber lasers are different from the more common CO2 laser etching machines. The galvo fiber laser machines are smaller and more compact than a typical gantry style CO2 laser cutter and engraver, and they are able to mark and engrave metal, stone, and polymers unlike their CO2 counterparts. There are larger fiber lasers o...
view more
-
355nm 3W UV Laser for Stereolithography 3D Printing
Jun 07 , 2023
355nm 3W UV Laser for Stereolithography 3D Printing 1. Product Description The laser generates 355nm UV laser with average output power >3W@30KHz; Client can choose laser crystal YVO4 or YAG according to actual need to meet final tech requirements; The laser is filtered twice inside laser resonator, besides client can opt intracavity primary beam expanding, lowering damage possibility of brewster ...
view more
-
Deep UV lasers for Raman Spectroscopy
Jun 08 , 2023
The deep UV laser is suitable for life science industries (biophysics, pharmaceuticals, bioengineering) as a stable laser source for Raman spectroscopy The main advantages of the 213nm laser for Raman Spectrometry: · Increased sensitivity can result from UV excitation, since even non-resonance Raman scattering efficiency is proportional to λ-4, where λ is the laser wavel...
view more
-
1064nm Infrared laser Vs 355nm UV Laser,What is the Difference
Jun 09 , 2023
Nowadays,with the rapid development of laser technology,Laser marking machines with air-cooled have been widely used in many applications from auto parts to medical industry etc.These process of marking have significantly increased our production efficiency.Compared to other lasers technology,and among them, infrared lasers and ultraviolet lasers are the two type of lasers most widely used.They ha...
view more
-
355nm UV Laser source Application Samples
Jun 09 , 2023
Ultraviolet (UV) lasers offer extremely high photon energy. It can be applied to a wide range of applications. JPT’s Lark and Seal series laser sources produce high efficient UV laser for high speed processing. Let’s have a look at JPT’s UV laser application samples. UV Laser Sample Application - Plastic Marking UV laser is a better choice for 3C Marking indus...
view more
-
UV laser-ablated Cu superwetting surface with improved anti-icing and antibacterial properties
Jun 09 , 2023
UV laser-ablated Cu superwetting surface with improved anti-icing and antibacterial properties Ultraviolet laser-ablated technique was used to improve the anti-icing and antibacterial properties of copper (Cu) with the objective of achieving efficient heat exchange performance. The laser scanning space interval exhibited a critical influence on the surface topography. SEM obs...
view more
-
Water cooled 355nm UV Laser Micromachining-IPG Photonics Corporation
Jun 12 , 2023
The IX-255 UV laser micromachining system from IPG Photonics Corp. is a configurable multifunctional system with a beam energy density up to 25 J/cm2 for applications such as drilling and cutting ceramics, patterning of microfluidic devices and machining of low-taper-angle holes in polymers.The fully interlocked, Class 1 workstation is built on a granite base and support structure for vibrati...
view more
-
What is Quark UV-Laser
Jun 12 , 2023
UV-Laser UV-Laser features Compact-sized laser unit Low cost Available product design:laser unit, optical laser system LD solid-state laser specifications LLO Polyimide Damage Supported by JKA and its promotion funds from KEIRINRACE Application Laser debonding Laser lift-off (LLO) ITO Removal Micro via hole drilling Polyimide cutting and drilling Analysis / spectroscopy UV-Laser Line...
view more
-
High Power Industrial Picosecond Lasers - EKSPLA
Jun 13 , 2023
High Power Industrial Picosecond Lasers - EKSPLA High-energy and high-power water-cooled Atlantic series picosecond lasers are designed for a variety of industrial applications such as LCD or OLED display cutting and drilling, laser induced forward transfer (LIFT), glass and sapphire processing, micromachining of ultra-hard materials, ablation of metals, cutting and drilling of polymers, silicon s...
view more
-
What is UV Laser
Jun 13 , 2023
UV Laser UV lasers are in the range of "cold lasers" that is a practical solution for marking on a variety of materials such as plastics and glass that provides a clean and clear mark with high contrast. Since they emit less energy, they are a great solution for many organic and soft products as they are less likely to burn the materials. UV lasers are good for marking and engraving on all plastic...
view more
-
DX Air-Cooled Series Nanosecond Lasers- Te Lintelo Systems B.V.
Jun 14 , 2023
DX Air-Cooled Series Nanosecond Lasers- Te Lintelo Systems B.V. Photonics Industries’ DX Air-Cooled Series nanosecond DPSS lasers, with a small, air-cooled form factor (275 in3, ~15.5 lbs or ~7 kg), offer the highest powers air-cooled in the market, with up to 10 W UV and up to 20 W green. The extra small DX Air-Cooled Series (152.1 in3, ~10 lbs or ~4.5 kg), outputs average powers of 1 W UV ...
view more
-
Nanosecond Pulsed Lasers – A Compact and Self-contained Design-prophotonix
Jun 14 , 2023
Nanosecond Pulsed Lasers – A Compact and Self-contained Design The Nanosecond Lasers are based on the innovative MatchBox platform, with intelligent power electronics. The lasers operate with excellent pulse-to-pulse stability and extremely stable harmonic generation and very low jitter ensuring consistency of results. The series is available in a wide range of wavelengths, output powers and...
view more