15W high-power UV laser cutting high-hardness quartz with fast speed and no burrs
Quartz can be used as an important building cornerstone, batch material and building material material. It can also be used to make refractory silica bricks and is the main raw material for glass. Therefore, quartz has played an important role in the development of modern society. High-hardness quartz has become a more difficult-to-cut material due to its high hardness. Therefore, many manufacturers are also looking for more machines and technologies that may achieve better cutting results.
In word of mouth, RFH UV lasers are supported by quartz customers
The traditional cutting method is to use a diamond saw blade for cutting, which is not expensive and fast, but it generates a lot of dust and noise pollution. For this reason, Mr. Chen, a high-hardness quartzite wholesaler, came to RFH, hoping to find a cutting technology with less pollution and better cutting results.
RFH achieved his goal and showed him 15W high-power UV laser cutting technology. I saw the machine cut at high speed on the quartz samples he brought. The completion time was almost the same as the traditional method, but the sound was more than ten times smaller. , And there is no smoke pollution during the cutting process. In addition to the two points raised by Mr. Chen, RFH UV lasers have other bright spots.
The effect of high-power UV laser cutting quartz is much better than that of stone saw blades
For example, UV laser cutting can run continuously for 24 hours, without special care, just plug in and run. Traditional diamond saw blades need to replace the blade for cutting, otherwise the quality of the cut quartz will be uneven, and the UV laser not only does not require consumables, but the cut products are smoother and free of burrs.
Mr. Chen was quite satisfied with the use of RFH high-frequency ultraviolet lasers, and actively recommended RFH to other customers and friends. In such word of mouth, RFH has gained more support and gains.
uv laser | green laser | Ultraviolet lasers | uv dpss laser | nanosecond laser | UV laser source | Solid State Lasers
