Where can I look at the troubleshooting of the 15W green laser engraving machine?

In life, we all encounter a lot of troubles. It is more difficult for us to repair a sewer or a broken faucet. It is precisely because we don’t have the awareness of being aware of it in advance. If there is an abnormal object, there will be a notice period. Then, when our laser laser engraving machine is malfunctioning, how do we eliminate it? From where can we see that the malfunction has occurred?

532nm green laser laser engraving machine

For the above problems, we all need to know. Now that laser engraving machines have gradually become popular in the market and used by so many people, they will also pay attention to how their faults are eliminated? Because only in this way, we can improve It is good for your industry to complete the work smoothly, and you don't need to consult other professionals to help yourself, because this will not only trouble others, but also make your own processing progress slower.

uv laser | green laser | ultraviolet lasers | uv dpss laser | nanosecond laser | UV laser source | Solid State Lasers

Check if there is a gradual problem with the power supply

Actually, many laser laser engraving machines have their main faults. They are also caused by the accumulation of time. There is another kind of improper operation or the wrong type of us, which leads to some faults in some of her motherboards and wires. Of course, we have to solve this problem. It is impossible to put it there, no matter what, it will only cause the machine to be scrapped in the end.

Because we have to pay attention to these problems in normal times, we can always check whether it is malfunctioning? First, we can pull the control line. If the control line is loose, then we have to Check if there is a problem with the connection? In short, if you find the problem, just go and solve it.

Furthermore, when he is processing the product, we can see if one of his focusing effects and bursts are normal. If it is normal, it means that there is no problem with his store source. If you find something abnormal, you can. Check if there is a gradual problem with the power supply.

The more common faults of the green light engraving machine need everyone to understand

Then we have to check its parameters. Sometimes when processing the product, if the parameters are not correct, problems will occur, so we must check the parameters before processing the product. Usually, we can also check the power supply. When it is normal, the control angle is normal, and some voltages need to be checked.

Usually, if we find that the fault is in the process of processing, we must stop processing at this time. The first step is to cut off the power supply. This is the most important thing. In short, in our life, there are still many laser engraving machines, so we should eliminate it. These faults also ensure the normal operation of the machine. Therefore, it is very important to master these contents. There are also some common faults that need to be understood by everyone.