What are the installation requirements for 355nm UV laser marking machine

Laser marking machine is a relatively advanced industrial equipment in the laser industry. Its professional performance is favored by the majority of customer groups. It is widely used in various industries. It can use laser to mark different objects and is anti-counterfeit. Many customers have to install the laser marking machine after they buy it. Then let's take a look at what are the installation requirements of the laser marking machine.

UV laser marking machine

When we order a laser marking machine, the manufacturer will produce and deliver the product according to the order. When receiving the goods, be sure to check the model and function whether it is the one you ordered, and then keep the laser marking machine's machine. Keep your body clean and tidy, try to keep the whole environment above ten degrees Celsius and below thirty-five degrees Celsius dry and dust-free. If you want to install in an independent closed workshop, ensure that the indoor temperature is not too high, and the ventilation and heat dissipation in the workshop When necessary, use necessary cooling and moisture-proof measures such as installing air conditioners. At the same time, the workshop must be supported by the main power supply. The single-phase AC power supply must be at least 2500W. It must be installed on the main power air switch. The use of triangular plugs is strictly prohibited. The main power supply in the workshop must be connected to the bottom surface and cannot appear. The phenomenon of virtual connection is mainly to ensure the safety of installers and later operators and prevent safety accidents.

uv laser | green laser | Ultraviolet lasers | uv dpss laser | nanosecond laser | UV laser source | Solid State Lasers

In order to prevent the impact on the efficiency of the laser, the water tank should be replaced at least two weeks during use

When installing the laser marking machine, the cooling water of the water tank needs to be recycled with deionized water. If there is no deionized water during installation, the second choice is distilled water, but in order to prevent the impact on the laser efficiency, the water tank is in It must be replaced at least two weeks during use. At the same time, it is difficult for our naked eyes to see the laser. When installing the rear baffle, it is necessary to check the red light indicator, and the direction of the red light irradiated from the laser is the same, so pay attention when installing The optical bench and the red light should be parallel, and the height should be the same as the center height. Finally, note that when installing the front baffle, you need to adjust the red light and the front baffle so that the red light can be emitted from the light exit hole of the front baffle before the front baffle can be effectively fixed. After fixing all the parts of the laser marking machine, we can try to boot and test. If the test results are not satisfactory, we can review the installation process and adjust the parts.

RFH UV laser

The above are several installation requirements of the laser marking machine. You must pay attention when installing it. At present, the laser marking machine is more in the finer occasions, and the marks made will not disappear easily, and the anti-counterfeiting is very strong. .