-
DPSS vs. Fiber Lasers
May 10 , 2021
DPSS vs. Fiber Lasers Fiber lasers are compact, rugged, reliable, & reasonably priced. So, why choose DPSS over fiber? DPSS lasers provide the same benefits fiber lasers offer, plus a host of additional benefits, allowing the versatility, precision, and quality you need for a vast range of applications. The DPSS lasers from Bright Solutions boast a rugged, fixed laser cavity design, resulting ...
view more
-
UV laser marking watch glass, not easy to break and high-definition
May 11 , 2021
UV laser marking watch glass, not easy to break and high-definition Because glass is fragile and very hard, it always challenges the limits of traditional manufacturing processes such as milling, drilling, and grinding. The processing of sapphire glass mirrors is complicated, and it requires not only experienced craftsman skills but also high-end equipment to produce high-quality products. ...
view more
-
LASER DIODE FUNDAMENTALS: WHAT ARE LONGITUDINAL MODES?
May 11 , 2021
LASER DIODE FUNDAMENTALS: WHAT ARE LONGITUDINAL MODES? Laser diodes must meet two critical requirements to facilitate the lasing process. The first requires that, at a minimum, the laser cavity's gain increases to the point that it reaches unity with the level of losses. This unity state is known as the gain threshold. If you missed it, read our previous blog, titled "Laser Diode Fundamentals: Dio...
view more
-
Why Are Picosecond Pulses Superior to Femtosecond?
May 11 , 2021
RAMAN SPECTROSCOPY: WHY ARE PICOSECOND PULSES SUPERIOR TO FEMTOSECOND? Spectroscopy is a class of analysis methods meant for chemical species identification and concentration measurement, based on emission spectra detection, if irradiated by an adequate light source. Fluorescence-based spectroscopy is one of the oldest spectroscopic techniques. This technique utilizes electron-photon interactions ...
view more
-
5W FEMTOSECOND LASER FOR MULTI-PHOTON MICROSCOPY!
May 11 , 2021
THE NEW ALCOR 1064NM 5W FEMTOSECOND LASER FOR MULTI-PHOTON MICROSCOPY! The ALCOR laser series from SPARK Lasers just received a nice power boost! This series, offered in a dual 920nm and 1064nm wavelength configuration up to 2W, or a single wavelength configuration with up to 4W at 920nm (highest power 920nm fs laser on the market), now expands it's offerings to 5W of power at 1064nm! The new ALCO...
view more
-
ADVANTAGES OF TWO-PHOTON MICROSCOPY UTILIZING FEMTOSECOND FIBER LASERS
May 11 , 2021
ADVANTAGES OF TWO-PHOTON MICROSCOPY UTILIZING FEMTOSECOND FIBER LASERS Microscope Traditional microscopy is the technical field of using microscopes to view objects and areas (mostly cells) that are not within the resolution range of the naked eye. Compound microscope designs feature objectives and condensers, but also consists of very simple, single-lens instruments that are often hand-hel...
view more
-
About Laser Cutting
May 12 , 2021
Laser Cutting Machines - What Will You Create? Epilog's CO2 laser cutting machines provide a wide range of opportunities and possiblities. The versatility, speed, and precision of Epilog's laser cutters enables makers, hobbyists, and entrepreneurs to produce everything from a simple machine concept to packaging to trophies & awards. Laser machines can cut wood, paper, plastic, fab...
view more
-
WHY IS A LOW JITTER FEATURE IMPORTANT IN ACTIVELY Q-SWITCHED DPSS LASERS?
May 13 , 2021
WHY IS A LOW JITTER FEATURE IMPORTANT IN ACTIVELY Q-SWITCHED DPSS LASERS? In actively Q-switched lasers, the user controls the pulsed laser output, so that no laser pulse emission occurs without providing a proper input signal, aka "the trigger". Due to the trigger signal propagation through the interface electronics, the Q-switch driver chain, and the laser resonator build-up time, a time delay (...
view more
-
Is laser engraving on ABS plastic harmful if you smell it?
May 13 , 2021
Is laser engraving on ABS plastic harmful if you smell it? Did you apply a data-driven approach to improve site structure? A confusing site architecture doesn‘t confuse Google, it impacts profits. Untangle it to see results! Of course no. Check the wikipedia below first: ABS is stable to decomposition under normal use and polymer processing conditions with exposure to carcinoge...
view more
-
Application of picosecond laser cutting machine in circuit board industry
May 14 , 2021
Application of picosecond laser cutting machine in circuit board industry The principle of the picosecond laser cutting machine is to focus the laser light emitted from the laser into a high-power density laser beam. When the laser beam irradiates the surface of the workpiece, the workpiece reaches the melting point or boiling point, and the high-pressure gas coaxial with the beam will melt...
view more
-
Application of UV laser in etching FPC circuit board
May 14 , 2021
Application of UV laser in etching FPC circuit board In recent years, the penetration rate of laser processing equipment has become higher and higher. Almost all industrial manufacturing fields have lasers. More and more industries are inseparable from laser manufacturing technology. This is due to the non-contact processing of laser processing methods. , High efficiency, low impact on materials, ...
view more
-
For laser marking on plastics, 3W5W UV laser can be selected
May 17 , 2021
For laser marking on plastics, 3W5W UV laser can be selected Lasers are roughly classified into fiber lasers, carbon dioxide lasers, and ultraviolet lasers. Some plastics are easy to mark because they absorb laser light, while some plastics do not absorb laser light and cannot be marked with laser light at all. The absorption rate of the laser is a function of the wavelength. Therefo...
view more
