The difference and application of light carving and deep carving of uv laser  engraving machine

If we want to understand the laser engraving machine, we will know that it has a kind of light engraving and deep engraving. Two different engraving depths will also be applied to different products. In fact, the laser engraving machine is still engraved in this respect. There are many advantages, and the advantages are also widely used in our lives, so today we mainly talk about the laser engraving machine, the difference between light carving and deep carving, and the application.

uv laser | green laser | ultraviolet lasers | uv dpss laser | nanosecond laser | UV laser source | Solid State Lasers

355nm laser engraving machine

First of all, the laser laser engraving machine does not need to touch the product when engraving, because he uses a laser to mark, so there is a beam of light, which is emitted by the laser, which saves a lot of time. The other steps are also perfect when reaching the standard, and there will be no interference from other factors. Xiao Yu, his carving accuracy is relatively high, so many complex patterns and some relatively small numbers and passwords will be marked by it. So such a good machine, of course, we need to know more about her, among them It's about her application of deep carving and low carving.

UV laser engraving different types of products

As far as the definition of light carving is concerned, the depth is generally more latent, then the depth of the deep scale carving is deeper. This is also literally we can understand, then when should deep carving and when should be shallow carving Well? Actually, it mainly depends on the materials provided by our family. What kind of situation it is. If it is like glass, then of course we need to use light carving. If we use deep tuning, his strength will be too strong. It may cause our glass to break. Then, for a harder product like metal, it can be deep-carved, so that it can be carved on metal, because metals are harder and more difficult to carve. product.

Deep carving takes more time to process

In addition, light carving is mainly used for marking on some tools and accessories. Then for deep carving, he can make some molds and some seals, so that the engraving is obvious and can be used by others. .

In short, there is still a certain difference in the depth of engraving. The depth of engraving can be adjusted at some power, or it takes more time to adjust the class for a long time than light engraving, so deep engraving is more needed. Time to process is also a task that requires patience.

RFH 3w 5w 10w 15w UV laser

What you said is just a brief introduction to everyone. Although the principles of the two engraving methods are the same, the materials they use and the surface of the market are different. I also hope that The above content can help everyone understand the difference between deep carving and low carving, which is also very good for distinguishing applications.