Several factors affecting the speed of laser marking

Generally speaking, the speed of laser marking machine is very fast, and the general performance index given by most manufacturers is 7000mm/s. However, in practical applications, some customers feel that the efficiency is not high. When enterprises purchase laser marking machines, they attach great importance to the marking speed of the equipment, because this is directly related to the processing efficiency of the order. So, what factors will affect the marking speed of the laser marking machine? Let's follow the editor of Shangtuo Laser to learn about the marking speed of UV laser marking machine, CO2 laser marking machine and fiber laser marking machine. influencing factors.

Flying Laser Marking Machine

Generally speaking, the main reasons that affect the speed of the laser marking machine are divided into: one is the equipment itself, and the other is the processing workpiece. The main reasons for the equipment itself are laser frequency, laser spot mode and light speed divergence angle laser power, and reasonable optical coordination processing. Another reason is mainly the marking density, marking range, marking depth and laser spot size during processing. The specific influencing factors are as follows:

1. The speed of the galvanometer: the speed of a better galvanometer is still good, this is a hardware factor

2. Marking depth: some products need deep marking, there is no way to do this, either increase the laser power or reduce the marking speed

Laser marking machine manufacturers

3. Color marking: common stainless steel is black or colored, which requires slow speed

4. Parameter setting problem: There are two parameter settings that affect the speed in the Golden Orange software: one is the filling line spacing, and the other is the speed setting. The smaller the line spacing setting, the slower the speed. The speed setting is also the same principle.

5. Marking area: The larger the area is, the slower the efficiency will be. The larger the field lens, the weaker the laser will be. Either increase the laser power or reduce the speed, which is also a key factor affecting the efficiency.

6. Laser spot size: The density of the marking characters will also affect the speed. In the case of the same marking area, the spot is the same, and the marking depth is the same. The higher the marking density, the slower the marking speed. , After all, the character density to be marked is large, which is equivalent to directly increasing the area to be marked.