355nm UV laser high-precision marking

The laser marking machine has high precision, and the laser light speed is very fine, acting on the surface of the material, and the precision of small repositioning can reach 0.01mm. It is suitable for marking fine instruments and parts. The current accuracy can meet the needs of marking extremely small plastic and metal surfaces. For example, common two-dimensional codes have stronger market competitiveness compared with imprinting or jet marking methods. Then let's talk about the eight advantages of laser marking machine, as follows:

1. The laser marking machine is a physical non-contact processing.

There is no pollution source of any chemical products, and it is not limited to the shape of the processed products, round and square. Any arc can be used;

2. The laser marking machine is suitable for a wide range of materials.

It can mark the surface of almost all metal and non-metal materials (such as aluminum, stainless steel, glass, leather, cloth, paper, etc., different materials, different thicknesses, and different hardness materials are available);

uv laser | green laser | Ultraviolet lasers | uv dpss laser | nanosecond laser | UV laser source | Solid State Lasers

3. Good compatibility

Assist with other processing equipment to form a fully automated production line; The laser marking machine has clear and beautiful markings Durable and wear-resistant, it is not easy to be altered and covered, which plays a role of anti-counterfeiting to a certain extent;

4. The laser marking machine has a long service life

The core of the whole equipment is the laser, which has a service life of more than 20,000 hours;

5. Low cost of post-processing and maintenance

The marking speed is fast and the marking is formed at one time, the energy consumption is small, and the running cost is low. Although the initial equipment investment of the laser marking machine is higher than that of the traditional marking and coding equipment, it is more cost-effective to use the laser marking machine in terms of the later operating cost;

6. High processing efficiency

The laser beam under computer control can move at a high speed (speed up to 7000mm/s), processing a conventional product can be completed in a few seconds. The laser marking machine system is equipped with a computer control system, which can flexibly cooperate with the high-speed assembly line, which greatly improves the processing efficiency; The laser marking machine has lower requirements on the processing environment. The length and width dimensions of conventional laser marking machines are mostly more than one meter, occupy a small area, and only need electricity.