-
355nm DPSS Lasers-sintecoptronics
May 30 , 2023
1. ST Series DPSS UV Lasers Diode end-pumped lasers adopt full sealed-off design with small volume and low power consumption as well as fiber-coupled pumping, which is easily for the integration of system and equipment. The modularized design provides the convenience for changing by customers. The laser beam is TEMoo with high beam quality, high peak power and short pulse width. Excellent resonato...
view more
-
What is Ultraviolet Lasers
May 31 , 2023
The technology of lasers for the generation of ultraviolet light involves a number of challenges: For short wavelengths, strong spontaneous emission leads to a high threshold pump power (except when the gain bandwidth is narrow). For wavelengths below ≈ 200 nm, the choice of transparent and UV-resistant optical materials is fairly limited (see the article on ultraviolet light). Even w...
view more
-
Nanosecond Pulsed Lasers -IPG
Jun 01 , 2023
Nanosecond Pulsed Lasers -IPG A nanosecond is one billionth of a second. In that one billionth of a second IPG’s pulsed nanosecond fiber lasers can interact with a range of materials to mark, ablate, clean, scribe, cut, engrave and drill. IPG produces the broadest range of pulsed nanosecond lasers in the world, with a wide range of operating parameters to perfectly suit all demanding ...
view more
-
TOPTICA UV / RGB solutions Diode lasers for holography & lithography
Jun 03 , 2023
TOPTICA UV / RGB solutions Diode lasers for holography & lithography Diode lasers for holography & lithography Watt-class output power High coherence: > 100 m coherence length (< 1 MHz linewidth) Low cost of ownership UV and VIS wavelengths (optional wavelength tuning) Robust and reliable (optional frequency stabilization) Previous Next TOPTICA's high-power single-frequency diode las...
view more
-
JDSU ps UV Laser Xcyte-Laser 2000
Jun 03 , 2023
JDSU ps UV Laser Xcyte-Laser 2000 The JDSU Xcyte series lasers offer the advantages of diode-pumped solid-state lasers in quasi-CW 355nm air-cooled format. The Xcyte series lasers provide near diffraction-limited beam profile, excellent stability, long lifetime and low amplitude noise in a compact, low cost of ownership (COO) package. These qualities make the Xcyte laser the ideal replacement for ...
view more
-
What is the difference between Galvo Fiber and UV Lasers
Jun 03 , 2023
What is the difference between Galvo Fiber and UV Lasers Galvo fiber lasers are different from the more common CO2 laser etching machines. The galvo fiber laser machines are smaller and more compact than a typical gantry style CO2 laser cutter and engraver, and they are able to mark and engrave metal, stone, and polymers unlike their CO2 counterparts. There are larger fiber lasers o...
view more
-
Deep UV lasers for Raman Spectroscopy
Jun 08 , 2023
The deep UV laser is suitable for life science industries (biophysics, pharmaceuticals, bioengineering) as a stable laser source for Raman spectroscopy The main advantages of the 213nm laser for Raman Spectrometry: · Increased sensitivity can result from UV excitation, since even non-resonance Raman scattering efficiency is proportional to λ-4, where λ is the laser wavel...
view more
-
High Power Industrial Picosecond Lasers - EKSPLA
Jun 13 , 2023
High Power Industrial Picosecond Lasers - EKSPLA High-energy and high-power water-cooled Atlantic series picosecond lasers are designed for a variety of industrial applications such as LCD or OLED display cutting and drilling, laser induced forward transfer (LIFT), glass and sapphire processing, micromachining of ultra-hard materials, ablation of metals, cutting and drilling of polymers, silicon s...
view more
-
DX Air-Cooled Series Nanosecond Lasers- Te Lintelo Systems B.V.
Jun 14 , 2023
DX Air-Cooled Series Nanosecond Lasers- Te Lintelo Systems B.V. Photonics Industries’ DX Air-Cooled Series nanosecond DPSS lasers, with a small, air-cooled form factor (275 in3, ~15.5 lbs or ~7 kg), offer the highest powers air-cooled in the market, with up to 10 W UV and up to 20 W green. The extra small DX Air-Cooled Series (152.1 in3, ~10 lbs or ~4.5 kg), outputs average powers of 1 W UV ...
view more
-
Nanosecond Pulsed Lasers – A Compact and Self-contained Design-prophotonix
Jun 14 , 2023
Nanosecond Pulsed Lasers – A Compact and Self-contained Design The Nanosecond Lasers are based on the innovative MatchBox platform, with intelligent power electronics. The lasers operate with excellent pulse-to-pulse stability and extremely stable harmonic generation and very low jitter ensuring consistency of results. The series is available in a wide range of wavelengths, output powers and...
view more
-
IPG Photonics'ULPN-M Series ultraviolet nanosecond fiber lasers
Jun 14 , 2023
IPG Photonics’ ULPN-M Series ultraviolet nanosecond fiber lasers provide high peak power with scalable average output power up to 10 W, 1.5 ns pulse duration at full operational repetition rate range of 10-1000 kHz. The all fiber format allows for the adjustment of pulse energy and/or pulse repetition rate without affecting any of the output beam parameters. IPG’s novel fiber lasers ar...
view more
-
DC Series Nanosecond Lasers-Photonics Industries
Jun 14 , 2023
DC Series Nanosecond Lasers-Photonics Industries Features 351 nm or 527 nm wavelength Compact, rugged, air-cooled design. Water-cooled option Patented intracavity harmonic generation TEM00 beam with typical M² < 1.2 Pulse rep rates from single shot to 10kHz RS232 computer control External TTL Triggering All-in-one (AIO) single box design Option of 15 V Power Supply RFH Laser is a well -kno...
view more
