RFH UV solid-state laser marking 0.1mm pores on PC board

PC board customers praise the RFH UV laser as a good helper for fine drilling

PC board fine hole marking has the sudden emergence of RFH ultraviolet laser drilling technology?

PC board has the characteristics of high transparency, light weight, impact resistance, sound insulation and flame retardant. It is a high-tech, comprehensive performance, energy-saving and environmentally friendly plastic board. It is a plastic building material commonly used internationally. Comparative advantage.

The perforation technology for PC boards is becoming more and more important due to the widespread use of PC boards. The technology that has long been obsolete is slow, poor in accuracy, high in cost, and large in smoke. What is the difference between the emerging RFH ultraviolet laser perforation technology?

Mr. Chen from Shenzhen came to the RFH dust-free production workshop. What he saw was a scene where a 0.1mm pore test was being performed on a PC board, which attracted all his attention.

RFH's UV laser uses high-quality light spots to cut the surface of the material. Its thermal effect is small, and it will not damage the surface of the material or cause scorching. It can increase the processing speed while fully ensuring the quality. This is good for plastics such as PC boards. The material has unique advantages.

 uv laser | green laser | Ultraviolet lasers | uv dpss laser | nanosecond laser | UV laser source | Solid State Lasers

More importantly, and most satisfying to this customer, the focused spot of the UV laser can be as small as 15um, and the cutting accuracy can be as small as 0.02mm, which fully meets its high-precision requirements, and the high stability of continuous operation for 24 hours It also adds color to the performance of the ultraviolet laser, and also allows the completion of the PC board that is being punched with a 0.1mm hole.

The superb technology, the solid body and the super high cost performance made Mr. Chen very satisfied. He immediately placed an order for the machine and put it into use after the machine was sent to the factory, except for the constant sending of RFH UV lasers for marking. In addition to the PC board samples, the RFH UV laser is also praised as a good helper for fine drilling.