RFH UV laser for efficient glass cutting and drilling

RFH UV laser drilling technology brings glass to new heights

RFH UV laser cuts glass to avoid chipping and cracking

Glass is a common industrial material in our lives. With the increasing demand for glass crafts, glass application scenarios continue to expand, and diversified needs have given birth to the emergence and development of glass perforation technology. As we all know, glass is fragile and easily affected by external forces, so it has very high requirements on glass perforation technology.

The traditional mechanical drilling method will damage the glass, seriously reduce the yield and aesthetics. It is easy to cause the glass to break and the punched holes are of different sizes, which consumes too much material, wastes labor time, and reduces production. efficiency.

The RFH ultraviolet laser S9 reduces the diameter of the spot to the micron level to obtain a high-density laser, which can be drilled on almost any material, such as ceramics, glass, etc., and has a small aperture, fast drilling speed and efficiency. High, with advanced technology, not only can achieve efficient glass cutting and drilling, but also can effectively reduce the range of cutting edge chipping and internal cracks to ensure the strength of the glass.

Laser drilling is a non-contact processing method, which uses a high-power density laser beam to irradiate the material to be processed, and is not controlled by the mechanical properties of the material's hardness, rigidity, strength, and brittleness.

The RFH S9 series laser has good beam quality and a smaller focused spot, so that the material is quickly heated to the vaporization temperature and evaporates to form holes. It has the characteristics of high efficiency, safety, stability, and easy operation.

uv laser | green laser | Ultraviolet lasers | uv dpss laser | nanosecond laser | UV laser source | Solid State Lasers

Perforation range: small holes: 1.00～3.00(mm); secondary small holes: 0.40～1.00(mm); ultra-small holes: 0.1～0.40(mm); micro holes: 0.01～0.10(mm); secondary micro holes : 0.001～0.01(mm); Ultra-micropore: <0.001(mm), it can be easily solved by drilling the glass container.

At the same time, RFH series laser products can perform high-precision perforation on glass, with strong operability and no damage to the material. The operation is simple, and it also has unique Q-switching technology and all-digital intelligent power control technology, and the cost of getting started is low.  Compared with products of the same type, the light output is more stable, and the superior beam quality (M2<1.2) can be strictly guaranteed in all frequency ranges; its pulse width is <20ns@30k, and the heat-affected area during processing is extremely small.

Not only that, the S9 series has a wide range of applications, such as mobile phone industry, 3C electronics, consumer electronics, smart home, smart air conditioning, high-end glassware, lenses, wine glasses, crystal glasses, and can not only be marked on the outside. , It can also be carved internally.

RFH has been deeply involved in the research and development of ultraviolet lasers and green lasers for 15 years, with mature technology and excellent quality. At the same time, it also has a strong technical and service team that can provide you with the best quality products and services!