-
Plastic Laser welding places less stress on weld pieces
Apr 14 , 2021
Laser welding places less stress on weld pieces ADVANTAGES Seam quality. Lasers achieve excellent weld seam structure with no secondary finishing required. Non-contact. Laser welding places less stress on weld pieces. It also eliminates tooling replacements due to wear and tear. Cleanliness. Lasers don’t require filler materials or additives and leave virtually no debris. Precision. A ...
view more
-
355nm UV laser for automatic marking of QR code on PCB/FPCB surface
Apr 15 , 2021
355nm UV laser for automatic marking of QR code on PCB/FPCB surface PCB circuit board has high wiring density, small size and light weight, which is conducive to the development of smart phone electronic equipment in the direction of high density, high integration, packaging, miniaturization and multilayer; especially the bending resistance of FPC flexible boards, Precision, better applicat...
view more
-
0.02mm high-precision S9 UV laser is more suitable for PE film date printing
Apr 16 , 2021
0.02mm high-precision S9 UV laser is more suitable for PE film date printing PE film has a density of about 0.92g/cm3, good heat-sealability, waterproof and moisture-proof; low tensile strength, high tensile elongation, easy to wrinkle, and more easily deformed when heated. Therefore, when drying, the surface temperature of the film should not be too high (within 55 degrees). PE film can be used a...
view more
-
Cold light source UV laser can avoid heat deformation of PE film when marking date
Apr 16 , 2021
Cold light source UV laser can avoid heat deformation of PE film when marking date PE film has a density of about 0.92g/cm3, good heat-sealability, waterproof and moisture-proof; low tensile strength, high tensile elongation, easy to wrinkle, and more easily deformed when heated. Therefore, when drying, the surface temperature of the film should not be too high (within 55 degrees). PE film can be ...
view more
-
S9 ultraviolet laser is especially suitable for PE film coding, with high light stability
Apr 16 , 2021
S9 ultraviolet laser is especially suitable for PE film coding, with high light stability PE film has a density of about 0.92g/cm3, good heat-sealability, waterproof and moisture-proof; low tensile strength, high tensile elongation, easy to wrinkle, and more easily deformed when heated. Therefore, when drying, the surface temperature of the film should not be too high (within 55 degrees). P...
view more
-
UV laser drilling of SiC for semiconductor device fabrication
Apr 19 , 2021
Pulsed UV laser processing is used to drill micro holes in silicon carbide (SiC) wafers supporting AlGaN/GaN transistor structures. Direct laser ablation using nanosecond pulses has been proven to provide an efficient way to create through and blind holes in 400 µm thick SiC. When drilling through, openings in the front pads are formed, while blind holes stop ~40 µm before the backside...
view more
-
S9 UV laser engraves on black plastic plastic at high speed, clear and undistorted
Apr 22 , 2021
S9 UV laser engraves on black plastic plastic at high speed, clear and undistorted Mr. Zhang, runs a processing enterprise that produces various data lines, with 10,000 square meters of workshops, equipped with advanced production equipment, and can provide one-stop solutions from data line style development, design, production and sales. Since working with RFH for more than three ye...
view more
-
Ultra-fine marking on white plastic by UV laser
Apr 22 , 2021
Ultra-fine marking on white plastic by UV laser Charging head data line laser marking customer orders again 10 sets of S9 UV lasers Mr. Zhang, runs a processing enterprise that produces various data lines, with 10,000 square meters of workshops, equipped with advanced production equipment, and can provide one-stop solutions from data line style development, design, production and sales. &nb...
view more
-
Customers purchase 5 355nm UV lasers for PCB/FPCB processing
Apr 23 , 2021
Customers purchase 5 355nm UV lasers for PCB/FPCB processing Ultraviolet laser can mark various characters, symbols and patterns on the surface of circuit board PCB/FPCB, and the character size can range from millimeters to micrometers. In addition to effective anti-counterfeiting, it can also realize the control and traceability of product quality. Whether it is fine processing or processi...
view more
-
355nm UV laser etching PCB/FPCB circuit board
Apr 23 , 2021
355nm UV laser etching PCB/FPCB circuit board Ultraviolet laser can mark various characters, symbols and patterns on the surface of circuit board PCB/FPCB, and the character size can range from millimeters to micrometers. In addition to effective anti-counterfeiting, it can also realize the control and traceability of product quality. Whether it is fine processing or processing efficiency, ...
view more
-
ABS Plastic Engraving By UV laser
Apr 23 , 2021
ABS Plastic Engraving Plastic Engraving Plastic Engraving ABS plastic has the capabilities to be laser engraved or laser marked using a high contrast laser beam. ABS plastic engraving is ideal for adding numerous types of content to ABS plastic parts and accessories. Non-contact laser marking is very fast as well as abrasion, heat and acid resistant, and many different plastics can be marke...
view more
-
How to Engrave on Plastic by 355nm laser
Apr 23 , 2021
How to Engrave on Plastic by 355nm laser Methods of laser marking on plastics Foaming Foaming leaves a tangible mark on the material. It can be seen as laser-induced boiling, which melts the surface. Due to the rapid cooling, bubbles are encapsulated in the material. These bubbles leave a positive mark, which is tangible. The laser works on a low power level and longer pulses. Foaming works on all...
view more