-
Lasers can cut many types of thin metal—including sheet metal and foils
Apr 25 , 2021
Lasers can cut many types of thin metal—including sheet metal and foils—into complex shapes with high precision. Pairing the focused, high-energy laser spot with on-axis gas assist achieves clean cuts that don’t require further processing. Laser cutting of thin metals is found in many industries, such as automotive, appliances, electronics, energy, medical device manufactu...
view more
-
RFH UV laser is especially suitable for laser lettering and typing on switch panel
Apr 26 , 2021
RFH UV laser is especially suitable for laser lettering and typing on switch panel In the old days, there were no marked buttons on the switch panel. We would find stickers or handwriting on the surface, which one is "on the light" or "off the light". This method is neither beautiful nor durable. However, since the popularization and application of ultraviolet laser technology in plastic sw...
view more
-
Permanent laser marks for industrial cables and wires
Apr 27 , 2021
Each year, billions of feet of cabling are installed around the world—requiring some kind of marking. Compared to other methods, laser wire marking offers unmatched precision, flexibility and speed without damaging the insulation or sheathing. THE ADVANTAGES OF LASER MARKERS Wire marks typically combine manufacturing information with product identification—though some additional marks ...
view more
-
355nm nanosecond UV laser for marking LOGO on ceramic surface is more precise
Apr 28 , 2021
355nm nanosecond UV laser for marking LOGO on ceramic surface is more precise Ceramics are widely used, tableware ceramics, ceramic sanitary wares, ceramic construction supplies, etc., are ubiquitous in our daily lives. Marking LOGO on ceramics and engraving personalized logos have become the development direction of high-end ceramic decoration in the future. The traditional methods of mark...
view more
-
RFH nanosecond UV laser for high-definition marking of LOGO on the helmet
Apr 30 , 2021
RFH nanosecond UV laser for high-definition marking of LOGO on the helmet New Era Securities analysis pointed out that the current national helmet penetration rate is extremely low. It is conservatively estimated that the production and sales of helmets will not exceed 50 million yuan per year. The demand for new helmets may exceed 300 million. If the average price is 100 yuan per piece, it corres...
view more
-
Non-contact marking of plastic materials with 355nm UV laser
Apr 30 , 2021
Non-contact marking of plastic materials with 355nm UV laser New Era Securities analysis pointed out that the current national helmet penetration rate is extremely low. It is conservatively estimated that the production and sales of helmets will not exceed 50 million yuan per year. The demand for new helmets may exceed 300 million. If the average price is 100 yuan per piece, it corresponds ...
view more
-
532nm nanosecond laser marking pattern technology improves the appearance of the glass
May 06 , 2021
532nm nanosecond laser marking pattern technology improves the appearance of the glass Nowadays, people’s requirements for cups are no longer as strong and durable as they were at the beginning. The big iron cups that once represented an era, plastic cups have gradually faded out of people’s vision, replaced by various mugs and wooden cups that win with their beauty. Cups, porta...
view more
-
10W-15W high-power ultraviolet laser is specially designed to solve PCB circuit board burrs
May 07 , 2021
10W-15W high-power ultraviolet laser is specially designed to solve PCB circuit board burrs In general, the surface of metal parts and the surface of small microscopic metal particles appear, these are called burrs. The more burrs, the lower the yield of PCB circuit boards. Causes of burrs: The cutting edge becomes dull and the gap is too large; the saw blade is dull or improperly in...
view more
-
High-power UV laser cutting technology to avoid PCB circuit board burrs
May 07 , 2021
High-power UV laser cutting technology to avoid PCB circuit board burrs In general, the surface of metal parts and the surface of small microscopic metal particles appear, these are called burrs. The more burrs, the lower the yield of PCB circuit boards. Causes of burrs: The cutting edge becomes dull and the gap is too large; the saw blade is dull or improperly installed; the punch is worn ...
view more
-
Nanosecond UV laser engraving technology makes ceramics infinite charm
May 08 , 2021
Nanosecond UV laser engraving technology makes ceramics infinite charm In the game between tradition and modernity, the vitality of ceramic handicrafts is due to its active embrace of modernity and trend. Both styles and patterns have not adhered to conventions, but adopted modern ultraviolet laser marking technology to complete ceramic engraving and LOGO engraving. And painted various patt...
view more
-
Nanosecond solid-state UV laser marking plastic air switch, long life
May 10 , 2021
Nanosecond solid-state UV laser marking plastic air switch, long life Although air switches are widely present in everyone's homes, few people know something about this little thing that guarantees the safety of our families. Even if they do, only high school students may know something from physics textbooks. Because the air switch has a long life cycle and almost no one cleans it u...
view more
-
Nanosecond green laser marking watch glass mirror has anti-counterfeiting effect
May 12 , 2021
Nanosecond green laser marking watch glass mirror has anti-counterfeiting effect Glass is fragile, so engraving on the surface of glass products requires high craftsmanship. The laser marking adopts non-contact processing, which has fast engraving speed, high efficiency, long use time, high engraving accuracy, and fine marking lines. It is especially suitable for engraving LOGO trademarks, ...
view more
