-
Laser Markers / Laser Marking systems
May 02 , 2021
Laser Markers / Laser Marking systems This section introduces the different types of laser markers and the characteristics of each type. Laser marker types vary according to the wavelength of the laser light, and the targets that can be marked also vary. The finish feeling for each marking process will also vary, so the ideal model will vary depending on the application objective. YVO4/Fibre Laser...
view more
-
532nm green laser marking glass LOGO will not be scorched or deformed
May 06 , 2021
532nm green laser marking glass LOGO will not be scorched or deformed Nowadays, people’s requirements for cups are no longer as strong and durable as they were at the beginning. The big iron cups that once represented an era, plastic cups have gradually faded out of people’s vision, replaced by various mugs and wooden cups that win with their beauty. Cups, portable cups, etc. Th...
view more
-
532nm nanosecond laser marking pattern technology improves the appearance of the glass
May 06 , 2021
532nm nanosecond laser marking pattern technology improves the appearance of the glass Nowadays, people’s requirements for cups are no longer as strong and durable as they were at the beginning. The big iron cups that once represented an era, plastic cups have gradually faded out of people’s vision, replaced by various mugs and wooden cups that win with their beauty. Cups, porta...
view more
-
What is the difference between laser marking and laser engraving?
May 06 , 2021
Laser Marking vs. Engraving December 6, 2017Jim EarmanLaser Engraving, laser marking0 Comments Over the years we’ve gotten a lot of questions about the various marking techniques that can be accomplished with a fiber laser marking system. The terms “Laser Marking” and “Laser Engraving” are frequently used interchangeably but there is a difference. Generally speaking, ...
view more
-
10W-15W high-power ultraviolet laser is specially designed to solve PCB circuit board burrs
May 07 , 2021
10W-15W high-power ultraviolet laser is specially designed to solve PCB circuit board burrs In general, the surface of metal parts and the surface of small microscopic metal particles appear, these are called burrs. The more burrs, the lower the yield of PCB circuit boards. Causes of burrs: The cutting edge becomes dull and the gap is too large; the saw blade is dull or improperly in...
view more
-
High-power UV laser cutting technology to avoid PCB circuit board burrs
May 07 , 2021
High-power UV laser cutting technology to avoid PCB circuit board burrs In general, the surface of metal parts and the surface of small microscopic metal particles appear, these are called burrs. The more burrs, the lower the yield of PCB circuit boards. Causes of burrs: The cutting edge becomes dull and the gap is too large; the saw blade is dull or improperly installed; the punch is worn ...
view more
-
15W high-power UV laser is needed to solve the problem of PCB burr
May 07 , 2021
15W high-power UV laser is needed to solve the problem of PCB burr In general, the surface of metal parts and the surface of small microscopic metal particles appear, these are called burrs. The more burrs, the lower the yield of PCB circuit boards. Causes of burrs: The cutting edge becomes dull and the gap is too large; the saw blade is dull or improperly installed; the punch is wor...
view more
-
What can be marked with a laser and how does one do that?
May 07 , 2021
What can be marked with a laser and how does one do that? It would be great if someone could create a “recipe book” that would give specific settings for laser marking any type of material on any type or make of laser marking system. Good luck finding that. Different laser marking systems from different manufacturers can yield different results on the same material for several reasons....
view more
-
Aerospace industry moving to laser marking
May 07 , 2021
More than a half-century since the dawn of the Jet Age, the aerospace industry finds itself once again leading the way into the future. Because of the need for both reliability and traceability, aviation manufacturers are driving a shift from dot-peen marking to laser marking. And this shift will soon reach jet-like speed as government regulators come around to the new methods and app...
view more
-
High-power UV laser marking ceramic tile trademark LOGO is more anti-counterfeiting
May 08 , 2021
High-power UV laser marking ceramic tile trademark LOGO is more anti-counterfeiting In the game between tradition and modernity, the vitality of ceramic handicrafts is due to its active embrace of modernity and trend. Both styles and patterns have not adhered to conventions, but adopted modern ultraviolet laser marking technology to complete ceramic engraving and LOGO engraving. And painted...
view more
-
Laser Marking on Plastic
May 08 , 2021
‘Plastics’ refer to materials with widely differing chemical compositions, which in turn means differing outcomes for the processes applied to them, including laser marking. Indeed, among plastics we can distinguish between polycarbonate, polyamide, polyester, PE, PET, ABS, and many others. These influence the choice of laser in terms of required wavelength. By way of example, P...
view more
-
LASER MARKING: Choosing the best laser for your application
May 08 , 2021
Today there are many different types of marking lasers that can mark all materials. Up until a few years ago, there were limits in terms of quality and range of markable materials, but this is no longer the case. You can find the right laser marker based on the type of material and the expected result. Given this wide range of possibilities, picking a suitable laser is not an easy tas...
view more
