-
How 5w nanosecond UV laser is used for ceramic surface engraving
Oct 10 , 2023
How 5w nanosecond UV laser is used for ceramic surface engraving A 5W nanosecond UV laser can be used for ceramic surface engraving through a process known as laser ablation. Here's a general overview of how it works: Preparation: Ensure that the ceramic surface is clean and free from any contaminants. Also, design the engraving pattern or text you want to mark on the surface using appropriate sof...
view more
-
How can the power or intensity of a UV laser beam be controlled?
Oct 12 , 2023
How can the power or intensity of a UV laser beam be controlled? Controlling the power or intensity of a UV (ultraviolet) laser beam can be achieved using a combination of optical and electronic methods. Here are some common techniques to regulate the power or intensity of a UV laser beam: 1.Electronic Control of Laser Power: 1.1 Drive Current Control: The power output of many lasers...
view more
-
why we need set parameters of UV laser marking machine on/off/end/corner delay
Oct 13 , 2023
Why do uv laser marking have to set so many delays? This is because the light output speed of the laser is inconsistent with the swing speed of the galvanometer motor. The laser light output speed is generally faster, while the galvanometer motor is mechanically slower than the laser. If we want the marking effect to be good, we must set these delay parameters. That is to say, when the laser marki...
view more
-
What are the chances of UV laser marking that the laser output is not strong or becomes weak?
Oct 13 , 2023
What are the chances of UV laser marking that the laser output is not strong or becomes weak? Laser marking machine, as an essential tool for modern enterprises, has been closely related to the information marking of enterprise products. Many large and well-known companies that we are familiar with are using lasers to print their own information. This method is beneficial to improving produ...
view more
-
High-repetition frequency, nanosecond green laser enables high-quality, rapid glass processing
Oct 13 , 2023
High-repetition frequency, nanosecond green laser enables high-quality, rapid glass processing The glass laser drilling equipment uses a high repetition frequency 532 nm nanosecond green laser, combined with laser back processing (that is, the beam focus moves from bottom to top) process, which can perform various types of thin glass and tubular glass of various materials. Fast finishing. F...
view more
-
355nm UV laser marking machine has no display, fan without rotating and printing problems
Oct 16 , 2023
The 355nm UV laser marking machine has no display, the power supply fan without rotating and printing problems Ultraviolet laser marking machine belongs to the series of laser marking machines, but it is developed using 355nm ultraviolet laser. This machine uses third-order intracavity frequency doubling technology. Compared with infrared laser, the 355 ultraviolet light focused spot is ext...
view more
-
How to choose a cold source marking soft materials: green laser marking or ultraviolet laser marking
Oct 17 , 2023
When marking soft materials, how to choose a cold light source: green laser marking or ultraviolet laser marking Laser marking or engraving glass, ceramics, plastics and other soft or heat-resistant materials can cause problems: choosing a more refined marking method improves quality, but ultimately sacrifices speed. Let me explain. If you have ever tried to mark these types of materials wi...
view more
-
What is the difference leather Laser Engraving with UV Laser,Fiber Laser or a CO2 Laser engraver
Oct 18 , 2023
What is the difference leather Laser Engraving with UV Laser,Fiber Laser or a CO2 Laser engraver There are so many different types of materials that you can use with your laser cutter and engraver. Most people know about the basics, such as wood and acrylic, but when it comes to going beyond those options and engraving other materials like leather, it can be daunting to figure out where to be...
view more
-
How to Engrave on Leather with RFH 3W uv laser system
Oct 18 , 2023
How to Engrave on Leather with RFH 3W uv laser system
view more
-
How to saving setting parameter for RFH nanosecond uv laser
Oct 18 , 2023
How to saving setting parameter for RFH nanosecond uv laser 1、Press “HOME” key to return to the main menu 2、Press“MENU” key, “ESC” key and “ENT” key to save the set parameters. The video of setting parameter
view more
-
UV or green laser marking machines problems and failures
Oct 18 , 2023
UV or green laser marking machines problems and failures Many companies and manufacturers have purchased laser marking machines and experienced abnormal problems such as reduced output power, inability of the laser beam to mark, failure to reach the expected marking depth, printing distortion, etc., and then they looked for repairs everywhere, that is, A waste of money and a waste of resources. RF...
view more
-
Causes and solutions of UV laser marking machine display and fan failures
Oct 18 , 2023
Causes and solutions of UV laser marking machine display and fan failures UV laser marking machine belongs to a series of laser marking machines, but is developed using 355nm UV laser. This machine adopts frequency doubling technology in the third cavity. Compared to infrared lasers, 355 UV has a very small focus. Spot and Can are mainly used for ultra-fine marking and engraving, which grea...
view more
