-
PET film marking production date, code, two-dimensional code, non-UV laser must be
Apr 19 , 2021
PET film marking production date, code, two-dimensional code, non-UV laser must be PET film, also known as high temperature resistant polyester film, has the characteristics of good transparency, non-toxicity, impermeability, and light weight. Therefore, it is often used to make packaging materials such as edible oil bottles, condiment bottles, and cosmetic bottles. But to mark the producti...
view more
-
Laser drilling of micro-holes in single crystal silicon, indium phosphide and indium antimonide using a continuous wave (CW) 1070 nm fibre laser
Apr 19 , 2021
The laser micro-drilling of “thru” holes, also known as via holes, in Si, InP and InSb semiconductor wafers was studied using millisecond pulse lengths from an IPG Laser Model YLR-2000 CW multimode 2 kW Ytterbium Fibre Laser and a JK400 (400 W) fibre laser, both with 1070 nm wavelength. The flexibility of this laser wavelength and simple pulsing scheme were demonstrated for semiconduct...
view more
-
Small Holes in Silicon Wafer
Apr 19 , 2021
Small Holes in Silicon Wafer: Microholes in silicon wafer substrate. Potomac has the capability to drill holes, channels and pockets in silicon wafers with feature sizes as small as a few microns. Please contact us today to discuss your application.
view more
-
532nm laser marker case for drilling tempered glass
Apr 20 , 2021
532nm laser marker case for drilling tempered glass
view more
-
532 Green laser cut tempered glass
Apr 20 , 2021
532 Green laser cut tempered glass
view more
-
tempered glass be cut or drilled by 532nm green laser
Apr 21 , 2021
tempered glass be cut or drilled by 532nm green laser
view more
-
Charging head data line laser marking customer orders again 10 sets of S9 UV lasers
Apr 22 , 2021
Charging head data line laser marking customer orders again 10 sets of S9 UV lasers Mr. Zhang, runs a processing enterprise that produces various data lines, with 10,000 square meters of workshops, equipped with advanced production equipment, and can provide one-stop solutions from data line style development, design, production and sales. Since working with RFH for more than three y...
view more
-
How To Cut Tempered Glass With Laser
Apr 22 , 2021
Many of the mechanical or other laser methods cannot provide the level of precision and quality needed for this kind of products. Tempered glass cannot be cut, except with special laser cutters used by professionals. You can do edge work if you are careful, but you are weakening the edge substantially in doing so. The benefits of glass cutting. Get contact details and address | id: These co...
view more
-
Nanosecond UV laser engraving PCB circuit board QR code will not fade or fall off
Apr 23 , 2021
Nanosecond UV laser engraving PCB circuit board QR code will not fade or fall off Ultraviolet laser can mark various characters, symbols and patterns on the surface of circuit board PCB/FPCB, and the character size can range from millimeters to micrometers. In addition to effective anti-counterfeiting, it can also realize the control and traceability of product quality. Whether it is fine p...
view more
-
How do I cut a phone’s tempered glass screen protector by green laser?
Apr 23 , 2021
How do I cut a phone's tempered glass screen protector by green laser? Ad by Duda.co What website builders are recommended for agencies? Something that has lot of templates and is easy to operate. There are a few website builders on the market that gear at least some of their products and features toward digital marketing agencies. Here are three of the most common website b(Continue reading) 3 An...
view more
-
How to Engrave on Plastic by 355nm laser
Apr 23 , 2021
How to Engrave on Plastic by 355nm laser Methods of laser marking on plastics Foaming Foaming leaves a tangible mark on the material. It can be seen as laser-induced boiling, which melts the surface. Due to the rapid cooling, bubbles are encapsulated in the material. These bubbles leave a positive mark, which is tangible. The laser works on a low power level and longer pulses. Foaming works on all...
view more
-
Headphone data cable power bank laser marking processing, choose S9 ultraviolet laser
Apr 25 , 2021
Headphone data cable power bank laser marking processing, choose S9 ultraviolet laser Ultraviolet laser can engrave LOGO trademark, text, two-dimensional code, pattern, serial number, serial number, symbol, garbled number in ABS plastic shell and data cable shell. It has fast engraving speed, high production efficiency, long service life and simple operation. , Zero consumables, free modifi...
view more
