Maintenance and maintenance of 3w and 5w UV laser marking machine

For UV laser marking machines, 3w and 5w are even common equipment models. 3w and 5w ultraviolet laser marking machines are constantly developing, but their long-term use will also cause some damage. This is also a common problem with every machine, but if we do good maintenance and maintenance , It will not be so easy to damage the machine. So in the process of machine application, if there are some common failures, we need to do some proper operation methods to repair and maintain the machine.

5w UV laser marking machine

Next, let’s talk about the maintenance of 3w and 5w UV laser marking machines. They are industrial production equipment and machines. In short, these are still essential. If the maintenance work is done, it can be improved. The life of the machine can also reduce the occurrence of failures in the normal working process of the machine, thereby improving our work efficiency on the side.

uv laser | green laser | Ultraviolet lasers | uv dpss laser | nanosecond laser | UV laser source | Solid State Lasers

Whether the height of the lifting machinery slide rail on the working table has shifted

First of all, when we use the machine, we must pay attention to whether the height of the lifting machinery slide rail on the working table has changed. If there is, we must remember to adjust to the correct height. In addition, we Before use, you must clean up the scene in the correct way. It is recommended to use some small towels dipped in ethanol to clean up and wipe in one direction. Secondly, it is the main box of the UV laser marking machine. The main box is a Very important parts need to be cleaned regularly. When the manager is in charge, you can blow along the level of the branch. Remember, don't use water to clean it, because there are still circuit boards inside, and it will be bad if it causes a short circuit at that time.

Be sure to pay attention to the damage of the power supply and wires

In addition, before we start the machine, we need to check whether our mobile phone settings have changed. We must follow the instructions and the correct process for actual operation. We must pay attention to the UV laser marking machine during the operation of the equipment. If the power supply and wires are damaged, if such a phenomenon occurs, you must avoid repairing the power supply and wires first and working on them, otherwise it will cause a short circuit or even more serious disasters.

If you find that the equipment is faulty, you must deal with the problem in time

Then there is the server computer. Many people in this place will ignore the cleaning, but it is often necessary to clean up. In the cleaning process, try to use one hand to work, so as to prevent the current from generating a flow circuit with your body and causing yourself For physical damage, we usually have to check the condition of the various parts of the machine, including the operation of the indicator light and the hot fan. If the equipment is found to be faulty, we must deal with the problem in time.

The above is a little knowledge about the maintenance of 3w and 5w UV laser marking machines! Hope to help everyone.