Introduce the difference between different powers of 15w uv laser

The price of 3W-5W UV laser marking machine is moderate. It is mainly used for finer marking. The marking range can meet most of the processing and marking requirements. The 5W marking machine can adjust the power of the laser to 3W RFH UV laser marking machine. Standard equipment to use, and will not change the material or characteristics they play, but the effect will be a little different, some materials can only use 3W power to play a good effect, and 5W power can not play a good effect.

RFH UV laser marking machine is a relatively intelligent marking machine equipment on the market. Because of its small focusing spot and small processing heat affected zone, it can carry out ultra-fine marking and special material marking, which is good for the marking effect. Recommended products for high-demand customers, the most commonly used UV laser equipment on the market are 3W, 5W, 10W, and 15W.

A brief introduction to the difference between different powers of UV laser marking machines

uv laser | green laser | Ultraviolet lasers | uv dpss laser | nanosecond laser | UV laser source | Solid State Lasers

The price of 3W-5W UV laser marking machine is moderate, and it is mainly used for finer marking. The marking range can meet most of the processing and marking requirements. The 5W marking machine can adjust the power of the laser to 3W Juguangheng UV Laser marking equipment will not change the materials or features they are marking, but the effect will be a little different. Some materials can only be used with 3W power to produce good results, but 5W power can not produce good results. .

However, if some materials can only be marked with 5W power, then 3W RFH UV laser marking machine cannot be used. In terms of comprehensive use range, it is recommended to use 5W equipment as far as economical permits. Compared with 3W equipment, it is more scalable and has more maintenance space. Then the price of 10W-15W equipment is not cheap, and it is mainly used for cutting and drilling. It mainly includes FPC, ceramic sheets, glass sheets and other materials that are difficult to cut by other processes.