-
Fast, flexible laser marking for pharmaceutical tablets
Apr 15 , 2021
As pharmaceutical manufacturing continues to evolve, you need tools that are readily adaptable and easy to implement. Your tablet marking systems must be able to change information quickly—adjusting to multiple shapes and sizes without halting production. Ink marking methods can smear, make contact with the tablet and require regular maintenance—adding extra steps to your manufa...
view more
-
S9 ultraviolet laser is especially suitable for PE film coding, with high light stability
Apr 16 , 2021
S9 ultraviolet laser is especially suitable for PE film coding, with high light stability PE film has a density of about 0.92g/cm3, good heat-sealability, waterproof and moisture-proof; low tensile strength, high tensile elongation, easy to wrinkle, and more easily deformed when heated. Therefore, when drying, the surface temperature of the film should not be too high (within 55 degrees). P...
view more
-
Using UV laser marking, Safe, non-contact etching for printed circuit boards
Apr 16 , 2021
Using UV laser marking, Safe, non-contact etching for printed circuit boards PCB marking—including etching codes, numbers and logos onto circuit boards—is necessary for inventory control and tracking. Many conventional methods, however, are time consuming and require additional consumables and cleaning processes. Our fully automated PCB laser marking systems overcome these challenges. ...
view more
-
UV lasers are ideal for small, precise holes of plastic
Apr 16 , 2021
Laser technology has many advantages over traditional drilling methods. It enables more precise drilling, makes no mechanical contact with plastic parts and lets you switch between hole sizes and shapes quickly and easily. Depending on the order you need to fill, you may require different hole sizes for a specific part. Thanks to laser drilling, you can stock undrilled parts and then drill the req...
view more
-
Laser cutting, engraving and marking PET film, UV laser moves at a high speed of 5-7 meters/second
Apr 19 , 2021
Laser cutting, engraving and marking PET film, UV laser moves at a high speed of 5-7 meters/second PET film marking production date, code, two-dimensional code, non-UV laser must be PET film, also known as high temperature resistant polyester film, has the characteristics of good transparency, non-toxicity, impermeability, and light weight. Therefore, it is often used to make packagin...
view more
-
PET film marking production date, code, two-dimensional code, non-UV laser must be
Apr 19 , 2021
PET film marking production date, code, two-dimensional code, non-UV laser must be PET film, also known as high temperature resistant polyester film, has the characteristics of good transparency, non-toxicity, impermeability, and light weight. Therefore, it is often used to make packaging materials such as edible oil bottles, condiment bottles, and cosmetic bottles. But to mark the producti...
view more
-
UV laser drilling of SiC for semiconductor device fabrication
Apr 19 , 2021
Pulsed UV laser processing is used to drill micro holes in silicon carbide (SiC) wafers supporting AlGaN/GaN transistor structures. Direct laser ablation using nanosecond pulses has been proven to provide an efficient way to create through and blind holes in 400 µm thick SiC. When drilling through, openings in the front pads are formed, while blind holes stop ~40 µm before the backside...
view more
-
Laser drilling of micro-holes in single crystal silicon, indium phosphide and indium antimonide using a continuous wave (CW) 1070 nm fibre laser
Apr 19 , 2021
The laser micro-drilling of “thru” holes, also known as via holes, in Si, InP and InSb semiconductor wafers was studied using millisecond pulse lengths from an IPG Laser Model YLR-2000 CW multimode 2 kW Ytterbium Fibre Laser and a JK400 (400 W) fibre laser, both with 1070 nm wavelength. The flexibility of this laser wavelength and simple pulsing scheme were demonstrated for semiconduct...
view more
-
Ultra-fine marking on white plastic by UV laser
Apr 22 , 2021
Ultra-fine marking on white plastic by UV laser Charging head data line laser marking customer orders again 10 sets of S9 UV lasers Mr. Zhang, runs a processing enterprise that produces various data lines, with 10,000 square meters of workshops, equipped with advanced production equipment, and can provide one-stop solutions from data line style development, design, production and sales. &nb...
view more
-
Charging head data line laser marking customer orders again 10 sets of S9 UV lasers
Apr 22 , 2021
Charging head data line laser marking customer orders again 10 sets of S9 UV lasers Mr. Zhang, runs a processing enterprise that produces various data lines, with 10,000 square meters of workshops, equipped with advanced production equipment, and can provide one-stop solutions from data line style development, design, production and sales. Since working with RFH for more than three y...
view more
-
Headphone data cable power bank laser marking processing, choose S9 ultraviolet laser
Apr 25 , 2021
Headphone data cable power bank laser marking processing, choose S9 ultraviolet laser Ultraviolet laser can engrave LOGO trademark, text, two-dimensional code, pattern, serial number, serial number, symbol, garbled number in ABS plastic shell and data cable shell. It has fast engraving speed, high production efficiency, long service life and simple operation. , Zero consumables, free modifi...
view more
-
5 sets of S9 UV lasers for ABS plastic shell data cable engraving LOGO
Apr 25 , 2021
5 sets of S9 UV lasers for ABS plastic shell data cable engraving LOGO Ultraviolet laser can engrave LOGO trademark, text, two-dimensional code, pattern, serial number, serial number, symbol, garbled number in ABS plastic shell and data cable shell. It has fast engraving speed, high production efficiency, long service life and simple operation. , Zero consumables, free modification of patte...
view more
