How to standardize the use of nanosecond ultraviolet laser marking machine

As we all know, any equipment has fixed operating procedures and methods. Only the correct method can ensure the normal operation of the equipment. The same is true for laser marking machines. Laser marking machines are laser equipment, and the risk of failure is relatively high. Yes, so you must go through professional training before you can operate it. How to regulate the use of laser marking machine, then I will introduce a few details for you, I hope it can help you.

355nm laser marking machine

Laser marking machine is a very widely used equipment on the market. It can mark the surface of various objects by laser. When using it, the company should arrange for fixed staff to use and maintain it, so as to increase the staff’s familiarity with the equipment. And operation professionalism, at the same time, it must be trained and qualified by professionals to operate, the main purpose is for the personal safety of the operator. Each laser marking machine is equipped with an instruction manual when it leaves the factory. In order to prevent damage to the equipment due to misoperation, the staff must follow the steps and guidelines in the instruction manual when operating.

uv laser | green laser | Ultraviolet lasers | uv dpss laser | nanosecond laser | UV laser source | Solid State Lasers

Before turning on the laser marking machine, wear protective equipment in accordance with the regulations

Before starting the laser marking machine, you must wear protective equipment in accordance with the regulations, especially when near the laser beam, you must use standard protective glasses to avoid damage to your eyes. When starting, you must manually follow the low-speed XY method. The machine tool is started to ensure that there is no abnormal situation. When the laser marking machine is started, the staff is strictly prohibited from leaving the job or entrusting others to take care of it. If there is an urgent need to leave, the equipment can be disconnected and stopped. start up.

Equipped with corresponding fire extinguishers and other safety facilities near the laser marking machine

The laser marking machine will generate some trivial substances and dust during use. We need to clean the equipment and the surrounding environment, especially if there is no adhesion of oil and dust, and add oil to the moving parts such as the guide rail for maintenance. Check each part Whether there is any loosening of screws, the handover can be performed after all inspections are completed. If the laser marking machine fails, the high-voltage safety regulations must be strictly , and the maintenance can be carried out after the power is completely cut off. In addition, the laser marking machine should be equipped with corresponding fire extinguishers and other safety facilities, placed in a place within reach, and the laser should be turned off in time when no production and processing activities are carried out, and it should not be placed when the beam is not protected. Flammable material.

RFH UV laser

How to use the laser marking machine correctly, in addition to complying with the regulations of use, the more important thing is safety. It is necessary to abide by the corresponding safety production guidelines, and must be professionally trained and qualified when operating on the job, and the equipment should be disconnected in time if there is a problem Power supply and arrange professional maintenance.