How to solve the problem of laser cutting machine cutting circuit board

     The laser cutting machine can cut all kinds of materials by emitting energy. But long-term use of the cutting machine will cause malfunctions and problems to a certain extent. There are many reasons for this problem, including parameters, lenses, optical path and power, etc. Here is how to solve this problem.

        1. Adjust the software parameters. We can adjust the machine parameters through the control panel and RDWorks cutting software to make the cutting effect better. 2. Check the lens, stains on the reflective lens will cause the reflectivity to decrease. We need to wipe it with a clean soft cloth and alcohol to ensure that the reflectivity meets the light output requirements. 3. Check the light path. The light path will also affect the cutting effect. After wiping or replacing the lens, if the cutting still fails, you can check the light path to ensure that the light is correct. 4. Replace the laser tube and power supply. If the material is too thick and the speed has been reduced to 1, it still cannot be cut clean. We need to increase the power and replace the high-power laser tube and power supply.

uv laser | green laser | Ultraviolet lasers | uv dpss laser | nanosecond laser | UV laser source | Solid State Lasers