How to adjust the parameters of 3W uv laser marking machine?

In contemporary society, the use of marking machines is becoming more and more widespread. In fact, many things around us have the shadow of laser marking machines. The patterns of many objects are only completed by laser marking machines, so marking Many people love and pay attention to the machine, and many users will also have doubts. Today, it revolves around how to modulate the parameters of the laser marking machine because it relies on the parameters to complete the work.

355nm uv laser marking machine

So how do you debug the parameters of the laser marking machine? Many people may not know what the parameters are. The parameters are actually similar to the pixels in our camera. The higher the pixel, the clearer the picture, then the higher the parameters here. Marking The pattern will be clearer, but the time will be shortened and the efficiency will be lowered, so it is necessary to adjust an appropriate value, usually about three hundred to six hundred for debugging, only for reference and suggestions.

First determine what the parameter value needs to be

First of all, you need to determine what the parameter value is, and then you need to set the parameters of the photo. Generally, you need to debug in the photo settings. If it is normal, you need to set inversion and then expand. A series of effects of brightness, contrast and shadow can be adjusted. Dot mode is controlled at 0.5, and you may see something that scans in both directions. This thing usually doesn't move it.

We can also try to adjust the marking frequency

We can also try to adjust the frequency of marking with parameters. The frequency of breaking is a frequency of marking within a certain period of time. Don’t think these have nothing to do with the parameters. We can use these methods to solve the pixel problem of the parameters. , The following content can be watched carefully.

The speed of marking is easily affected by the parameters

First of all, the marking frequency just mentioned, as long as the frequency is marked, the laser dots will be denser. On the contrary, marking is a kind of technical activity. Those who have carefully studied it can find that these graphics are composed of thousands under the microscope. It is composed of tens of thousands of small dots. The higher the frequency, the smoother the picture. Naturally, you will think that the marking parameters are very good.

Then talk about the relationship between the speed of reaching the standard and the parameters. The speed of marking is easily affected by the parameters. Then the subtle marking speed will also affect the marking parameters. If these are very mysterious, you can ask a professional. Consultation.

uv laser | green laser | ultraviolet lasers | uv dpss laser | nanosecond laser | UV laser source | Solid State Lasers

A brief description of the parameters of the laser marking machine

The above is a brief description of the parameters of the laser marking machine. There may be some parts that are not very complete. In short, the marking machine has different existences and is of extraordinary significance. In order for it to play its highest value, we must repair it. Pay attention to maintenance. At present, the laser marking machine is a more advanced marking machine, and the purchase cost will definitely cost a lot. In order to extend the life of the later use, it must be properly protected, so that it will not be in any way Easy to damage.