How should the red light function of the RFH 355 nm UV Solid State Laser be adjusted

Modern technology is developing rapidly, and laser technology, as a part of technology, is now very popular. Not only a wide range of applications in industry, but also personal entrepreneurship can use this device. So do you know the red light functional characteristics of the laser marking machine and how to adjust it?

In fact, the specific operation process can be changed according to personal habits. The production of a laser marking machine must include the red light marking computer operating system, so it is often called red light adjustment by everyone. However, there are many basic functions of red light adjustment, and it also plays an extremely important role in the precise positioning of laser marking machine marks.

Picture of how to adjust the red light function of the laser marking machine

uv laser | green laser | Ultraviolet lasers | uv dpss laser | nanosecond laser | UV laser source | Solid State Lasers

The function of red light adjustment of laser marking machine red light mark mainly includes the following three points:

★. The red light can also be used as the focus point of the laser marking machine, in other words, the mark of the laser engraving distance;

★. The red light adjustment is used as a sign light, and it is used in the adjustment of the resonator light path;

★. As the marking light for precise positioning of laser engraving machine, according to the difference of laser engraving APP, it can be divided into laser engraving core mark, laser engraving pattern design size category mark, laser engraving pattern design overall simulation mark, etc. All kinds of marking methods; it is also important to pay attention to enabling the red light adjustment of the laser marking machine, and the specific operators must have a corresponding understanding of the mechanical equipment. For example, the red light of ordinary laser marking machine manufacturers The adjustment and activation will be on the laser engraving APP.​

Red light automatic switch Press F2 on the mobile phone keyboard to turn on, off, or enable the red light button on the laser marking page to do specific operations. If you only see the scanning galvanometer working but no red light comes out, check it first. Check to see if the red light is adjusted to see if there is a mechanical device and the automatic switch is not enabled. Check whether the switching power supply circuit of the red light is enabled. Use a digital multimeter to check that the two red, gray, and black of the red light indicator are between each other. It is not that there is a 5V current and voltage. If it is a 5V current and voltage and there is no laser output, it can be confirmed that the red light indicator must be replaced.