-
How to Engrave on Plastic by 355nm laser
Apr 23 , 2021
How to Engrave on Plastic by 355nm laser Methods of laser marking on plastics Foaming Foaming leaves a tangible mark on the material. It can be seen as laser-induced boiling, which melts the surface. Due to the rapid cooling, bubbles are encapsulated in the material. These bubbles leave a positive mark, which is tangible. The laser works on a low power level and longer pulses. Foaming works on all...
view more
-
Marking mobile phone data lines, S9 UV laser with longer life is selected for laser engraving
Apr 25 , 2021
Marking mobile phone data lines, S9 UV laser with longer life is selected for laser engraving. Ultraviolet laser can engrave LOGO trademark, text, two-dimensional code, pattern, serial number, serial number, symbol, garbled number in ABS plastic shell and data cable shell. It has fast engraving speed, high production efficiency, long service life and simple operation. , Zero consumables, fr...
view more
-
Lasers can cut many types of thin metal—including sheet metal and foils
Apr 25 , 2021
Lasers can cut many types of thin metal—including sheet metal and foils—into complex shapes with high precision. Pairing the focused, high-energy laser spot with on-axis gas assist achieves clean cuts that don’t require further processing. Laser cutting of thin metals is found in many industries, such as automotive, appliances, electronics, energy, medical device manufactu...
view more
-
Ultrafast lasers—including femtosecond and picosecond lasers
Apr 25 , 2021
Ultrafast lasers—including femtosecond and picosecond lasers—are ideal for precision micromachining applications, such as processing semiconductors, flat panel displays and various thin-film materials. Applications may include: Precision micromachining Black marking of stainless steel or aluminum Surface micro-structuring and texturing Multilayer polymer film cutting Batt...
view more
-
RFH UV laser is especially suitable for laser lettering and typing on switch panel
Apr 26 , 2021
RFH UV laser is especially suitable for laser lettering and typing on switch panel In the old days, there were no marked buttons on the switch panel. We would find stickers or handwriting on the surface, which one is "on the light" or "off the light". This method is neither beautiful nor durable. However, since the popularization and application of ultraviolet laser technology in plastic sw...
view more
-
uv Laser systems for wafer serialization, marking and scribing
Apr 27 , 2021
Semiconductor wafer processing typically requires serialization, patterning and roughening operations. And picking the correct laser system for these operations can be complex once you consider all the relevant process variables—such as substrate type, wafer diameter, feature size, slag tolerances, debris volume, throughput and clean room protocols. Whether marking or cutting wafers, lasers ...
view more
-
355nm nanosecond UV laser for marking LOGO on ceramic surface is more precise
Apr 28 , 2021
355nm nanosecond UV laser for marking LOGO on ceramic surface is more precise Ceramics are widely used, tableware ceramics, ceramic sanitary wares, ceramic construction supplies, etc., are ubiquitous in our daily lives. Marking LOGO on ceramics and engraving personalized logos have become the development direction of high-end ceramic decoration in the future. The traditional methods of mark...
view more
-
Ceramic manufacturer orders 355nm UV laser to mark LOGO on ceramic surface
Apr 28 , 2021
Ceramic manufacturer orders 355nm UV laser to mark LOGO on ceramic surface Ceramics are widely used, tableware ceramics, ceramic sanitary wares, ceramic construction supplies, etc., are ubiquitous in our daily lives. Marking LOGO on ceramics and engraving personalized logos have become the development direction of high-end ceramic decoration in the future. The traditional methods of marking cerami...
view more
-
RFH nanosecond UV laser for high-definition marking of LOGO on the helmet
Apr 30 , 2021
RFH nanosecond UV laser for high-definition marking of LOGO on the helmet New Era Securities analysis pointed out that the current national helmet penetration rate is extremely low. It is conservatively estimated that the production and sales of helmets will not exceed 50 million yuan per year. The demand for new helmets may exceed 300 million. If the average price is 100 yuan per piece, it corres...
view more
-
Non-contact marking of plastic materials with 355nm UV laser
Apr 30 , 2021
Non-contact marking of plastic materials with 355nm UV laser New Era Securities analysis pointed out that the current national helmet penetration rate is extremely low. It is conservatively estimated that the production and sales of helmets will not exceed 50 million yuan per year. The demand for new helmets may exceed 300 million. If the average price is 100 yuan per piece, it corresponds ...
view more
-
CO2 Laser Marking Glass wafers,Weatherstripping,Electronic PCBs
Apr 30 , 2021
CO2 Laser Marking On this page, we explain marking examples and characteristics of CO2 laser markers, which are perfect for applications such as marking resin and paper or processing films. Applications Mechanism and Characteristics of CO2 Lasers Product Introduction Applications CO2 lasers have the longest wavelength of all commonly used lasers, more than ten times longer than that of stan...
view more
-
532nm nanosecond laser marking pattern technology improves the appearance of the glass
May 06 , 2021
532nm nanosecond laser marking pattern technology improves the appearance of the glass Nowadays, people’s requirements for cups are no longer as strong and durable as they were at the beginning. The big iron cups that once represented an era, plastic cups have gradually faded out of people’s vision, replaced by various mugs and wooden cups that win with their beauty. Cups, porta...
view more
