-
Ultrafast lasers—including femtosecond and picosecond lasers
Apr 25 , 2021
Ultrafast lasers—including femtosecond and picosecond lasers—are ideal for precision micromachining applications, such as processing semiconductors, flat panel displays and various thin-film materials. Applications may include: Precision micromachining Black marking of stainless steel or aluminum Surface micro-structuring and texturing Multilayer polymer film cutting Batt...
view more
-
Don't worry about PCB circuit board burrs with RFH 15W UV laser
May 02 , 2021
Don't worry about PCB circuit board burrs with RFH 15W UV laser PCB circuit board is the support of electronic components and the carrier of electrical connection of electronic components. It mainly supports and interconnects. It is widely used in mobile phones, computers, remote controls and other electronic equipment. In the production process of PCB circuit boards, UV laser technology ne...
view more
-
15W ultraviolet laser is used in PCB QR code laser drilling, cutting neatly and without burrs
May 02 , 2021
15W ultraviolet laser is used in PCB QR code laser drilling, cutting neatly and without burrs PCB circuit board is the support of electronic components and the carrier of electrical connection of electronic components. It mainly supports and interconnects. It is widely used in mobile phones, computers, remote controls and other electronic equipment. In the production process of PCB circuit ...
view more
-
0.02mm green laser has better light speed and better quality
May 06 , 2021
0.02mm green laser has better light speed and better quality Nowadays, people’s requirements for cups are no longer as strong and durable as they were at the beginning. The big iron cups that once represented an era, plastic cups have gradually faded out of people’s vision, replaced by various mugs and wooden cups that win with their beauty. Cups, portable cups, etc. The traditi...
view more
-
10W-15W high-power ultraviolet laser is specially designed to solve PCB circuit board burrs
May 07 , 2021
10W-15W high-power ultraviolet laser is specially designed to solve PCB circuit board burrs In general, the surface of metal parts and the surface of small microscopic metal particles appear, these are called burrs. The more burrs, the lower the yield of PCB circuit boards. Causes of burrs: The cutting edge becomes dull and the gap is too large; the saw blade is dull or improperly in...
view more
-
15W high-power UV laser is needed to solve the problem of PCB burr
May 07 , 2021
15W high-power UV laser is needed to solve the problem of PCB burr In general, the surface of metal parts and the surface of small microscopic metal particles appear, these are called burrs. The more burrs, the lower the yield of PCB circuit boards. Causes of burrs: The cutting edge becomes dull and the gap is too large; the saw blade is dull or improperly installed; the punch is wor...
view more
-
What is a Green Laser?
May 07 , 2021
What is a Green Laser? Creating permanent traceability marks is critical for many manufacturers. Sometimes, very delicate materials require the use of non-traditional methods and equipment to achieve this because the item is sensitive or the absorption ratio is so low that it is very difficult to get a readable amount of contrast in the permanent mark (2D Matrix Code or human-readable text)....
view more
-
15W UV solid-state laser engraving on ceramics, clear and delicate
May 08 , 2021
15W UV solid-state laser engraving on ceramics, clear and delicate In the game between tradition and modernity, the vitality of ceramic handicrafts is due to its active embrace of modernity and trend. Both styles and patterns have not adhered to conventions, but adopted modern ultraviolet laser marking technology to complete ceramic engraving and LOGO engraving. And painted various patterns. Ultra...
view more
-
Diode Lasers Jump to the Deep Ultraviolet
May 10 , 2021
Diode Lasers Jump to the Deep Ultraviolet After years of delays, a semiconductor diode laser has finally operated in the deep ultraviolet, pointing the way to bio-sensors and sterilization By Jeff Hecht UV LED made on HexaTech AlN substrate under electrical test at Ambient. Image: Adroit Materials Many UV LEDs fabricated by Adroit Materials on AlN wafer from HexaTech. Advertisement Ed...
view more
-
DPSS vs. Fiber Lasers
May 10 , 2021
DPSS vs. Fiber Lasers Fiber lasers are compact, rugged, reliable, & reasonably priced. So, why choose DPSS over fiber? DPSS lasers provide the same benefits fiber lasers offer, plus a host of additional benefits, allowing the versatility, precision, and quality you need for a vast range of applications. The DPSS lasers from Bright Solutions boast a rugged, fixed laser cavity design, resulting ...
view more
-
5W FEMTOSECOND LASER FOR MULTI-PHOTON MICROSCOPY!
May 11 , 2021
THE NEW ALCOR 1064NM 5W FEMTOSECOND LASER FOR MULTI-PHOTON MICROSCOPY! The ALCOR laser series from SPARK Lasers just received a nice power boost! This series, offered in a dual 920nm and 1064nm wavelength configuration up to 2W, or a single wavelength configuration with up to 4W at 920nm (highest power 920nm fs laser on the market), now expands it's offerings to 5W of power at 1064nm! The new ALCO...
view more
-
ADVANTAGES OF TWO-PHOTON MICROSCOPY UTILIZING FEMTOSECOND FIBER LASERS
May 11 , 2021
ADVANTAGES OF TWO-PHOTON MICROSCOPY UTILIZING FEMTOSECOND FIBER LASERS Microscope Traditional microscopy is the technical field of using microscopes to view objects and areas (mostly cells) that are not within the resolution range of the naked eye. Compound microscope designs feature objectives and condensers, but also consists of very simple, single-lens instruments that are often hand-hel...
view more