-
UV lasers are ideal for small, precise holes of plastic
Apr 16 , 2021
Laser technology has many advantages over traditional drilling methods. It enables more precise drilling, makes no mechanical contact with plastic parts and lets you switch between hole sizes and shapes quickly and easily. Depending on the order you need to fill, you may require different hole sizes for a specific part. Thanks to laser drilling, you can stock undrilled parts and then drill the req...
view more
-
Laser cutting, engraving and marking PET film, UV laser moves at a high speed of 5-7 meters/second
Apr 19 , 2021
Laser cutting, engraving and marking PET film, UV laser moves at a high speed of 5-7 meters/second PET film marking production date, code, two-dimensional code, non-UV laser must be PET film, also known as high temperature resistant polyester film, has the characteristics of good transparency, non-toxicity, impermeability, and light weight. Therefore, it is often used to make packagin...
view more
-
PET film marking production date, code, two-dimensional code, non-UV laser must be
Apr 19 , 2021
PET film marking production date, code, two-dimensional code, non-UV laser must be PET film, also known as high temperature resistant polyester film, has the characteristics of good transparency, non-toxicity, impermeability, and light weight. Therefore, it is often used to make packaging materials such as edible oil bottles, condiment bottles, and cosmetic bottles. But to mark the producti...
view more
-
UV laser drilling of SiC for semiconductor device fabrication
Apr 19 , 2021
Pulsed UV laser processing is used to drill micro holes in silicon carbide (SiC) wafers supporting AlGaN/GaN transistor structures. Direct laser ablation using nanosecond pulses has been proven to provide an efficient way to create through and blind holes in 400 µm thick SiC. When drilling through, openings in the front pads are formed, while blind holes stop ~40 µm before the backside...
view more
-
Laser drilling of micro-holes in single crystal silicon, indium phosphide and indium antimonide using a continuous wave (CW) 1070 nm fibre laser
Apr 19 , 2021
The laser micro-drilling of “thru” holes, also known as via holes, in Si, InP and InSb semiconductor wafers was studied using millisecond pulse lengths from an IPG Laser Model YLR-2000 CW multimode 2 kW Ytterbium Fibre Laser and a JK400 (400 W) fibre laser, both with 1070 nm wavelength. The flexibility of this laser wavelength and simple pulsing scheme were demonstrated for semiconduct...
view more
-
S9 UV laser engraves on black plastic plastic at high speed, clear and undistorted
Apr 22 , 2021
S9 UV laser engraves on black plastic plastic at high speed, clear and undistorted Mr. Zhang, runs a processing enterprise that produces various data lines, with 10,000 square meters of workshops, equipped with advanced production equipment, and can provide one-stop solutions from data line style development, design, production and sales. Since working with RFH for more than three ye...
view more
-
Ultra-fine marking on white plastic by UV laser
Apr 22 , 2021
Ultra-fine marking on white plastic by UV laser Charging head data line laser marking customer orders again 10 sets of S9 UV lasers Mr. Zhang, runs a processing enterprise that produces various data lines, with 10,000 square meters of workshops, equipped with advanced production equipment, and can provide one-stop solutions from data line style development, design, production and sales. &nb...
view more
-
Charging head data line laser marking customer orders again 10 sets of S9 UV lasers
Apr 22 , 2021
Charging head data line laser marking customer orders again 10 sets of S9 UV lasers Mr. Zhang, runs a processing enterprise that produces various data lines, with 10,000 square meters of workshops, equipped with advanced production equipment, and can provide one-stop solutions from data line style development, design, production and sales. Since working with RFH for more than three y...
view more
-
Customers purchase 5 355nm UV lasers for PCB/FPCB processing
Apr 23 , 2021
Customers purchase 5 355nm UV lasers for PCB/FPCB processing Ultraviolet laser can mark various characters, symbols and patterns on the surface of circuit board PCB/FPCB, and the character size can range from millimeters to micrometers. In addition to effective anti-counterfeiting, it can also realize the control and traceability of product quality. Whether it is fine processing or processi...
view more
-
355nm UV laser etching PCB/FPCB circuit board
Apr 23 , 2021
355nm UV laser etching PCB/FPCB circuit board Ultraviolet laser can mark various characters, symbols and patterns on the surface of circuit board PCB/FPCB, and the character size can range from millimeters to micrometers. In addition to effective anti-counterfeiting, it can also realize the control and traceability of product quality. Whether it is fine processing or processing efficiency, ...
view more
-
ABS Plastic Engraving By UV laser
Apr 23 , 2021
ABS Plastic Engraving Plastic Engraving Plastic Engraving ABS plastic has the capabilities to be laser engraved or laser marked using a high contrast laser beam. ABS plastic engraving is ideal for adding numerous types of content to ABS plastic parts and accessories. Non-contact laser marking is very fast as well as abrasion, heat and acid resistant, and many different plastics can be marke...
view more
-
How to Engrave on Plastic by 355nm laser
Apr 23 , 2021
How to Engrave on Plastic by 355nm laser Methods of laser marking on plastics Foaming Foaming leaves a tangible mark on the material. It can be seen as laser-induced boiling, which melts the surface. Due to the rapid cooling, bubbles are encapsulated in the material. These bubbles leave a positive mark, which is tangible. The laser works on a low power level and longer pulses. Foaming works on all...
view more